Amprobe LAN-1 LAN Cable Tester User Manual

1. પરિચય

આ Amprobe LAN-1 LAN Cable Tester is a diagnostic tool designed to identify and trace data cables and connectors. It helps detect common wiring issues such as shorts, miswirings, and open circuits in various cable types. This manual provides detailed instructions for the proper use, setup, and maintenance of your LAN-1 tester.

The LAN-1 evaluates most common cable types, including 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, as well as RJ45 and BNC connectors. It can test cables up to 300 meters long and uses LED indicators and an audible buzzer to signal cable status and errors.

2. સલામતી માહિતી

કૃપા કરીને ચલાવતા પહેલા બધી સલામતી સૂચનાઓ વાંચો અને સમજો Amprobe LAN-1 LAN Cable Tester. Failure to follow these instructions may result in injury or damage to the device.

• Do not use the device if it appears damaged or is not operating correctly.
• Ensure the correct battery type and polarity are used during installation.
• ઉપકરણને અતિશય તાપમાન, ભેજ અથવા સીધા સૂર્યપ્રકાશના સંપર્કમાં આવવાનું ટાળો.
• ઉપકરણને જાતે રિપેર કરવાનો કે સુધારવાનો પ્રયાસ કરશો નહીં. બધી સર્વિસિંગ લાયક કર્મચારીઓને સોંપો.
• Always disconnect the cable tester from any active network or power source before performing maintenance or battery replacement.

3. પેકેજ સામગ્રી

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:

• LAN-1 LAN Cable Tester
• (1) Remote terminator
• (1) RJ45 to female BNC cable
• (1) RJ45 to male BNC cable
• (1) RJ45 to RJ45 cable
• (1) Female BNC to female BNC cable
• (1) 9V battery (installed)
• સૂચનાઓ (આ માર્ગદર્શિકા)

4. ઉત્પાદન ઓવરview

આ Amprobe LAN-1 features a compact design with intuitive controls and clear LED indicators for efficient cable testing.

4.1 મુખ્ય લક્ષણો

• Cable Testing: Locates and traces data cables and connectors to identify shorts, miswiring, and opens.
• બહુમુખી સુસંગતતા: Evaluates 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, along with RJ45 and BNC connectors.
• ભૂલ સંકેત: An audible buzzer indicates an error condition in the cable.
• વિસ્તૃત શ્રેણી: Tests cables up to 300 meters long.
• ડિસ્પ્લે સાફ કરો: Eighteen red and green LEDs indicate the source or test results.
• ટેસ્ટ મોડ્સ: Supports Loopback Test and Remote Test functions.
• સલામતી અનુપાલન: CE - EMC certified.

4.2 ઘટક ઓળખ

આકૃતિ 1: આગળ view ના Amprobe LAN-1 LAN Cable Tester. This image displays the main unit with its LED pin-out indicator, battery status light, and control buttons including AUTO, MAN, HOLD, TEST, BATT, and the power button.

આકૃતિ 2: Amprobe LAN-1 LAN Cable Tester showing the main unit and the remote terminator module. This view highlights how the remote unit connects to the main tester for comprehensive cable testing.

• PIN-OUT INDICATOR LEDs: Displays the wiring status for each pin (1-8) and ground (G).
• BATT LED: બેટરીની સ્થિતિ દર્શાવે છે.
• ઓટો બટન: Initiates automatic scanning of cable pins.
• MAN Button: Allows manual step-through of cable pins.
• હોલ્ડ બટન: Pauses the current test result display.
• પરીક્ષણ બટન: Starts a test cycle.
• POWER Button (Yellow): ઉપકરણ ચાલુ અને બંધ કરે છે.
• આરજે 45 બંદર: For connecting RJ45 cables.
• BNC Port: For connecting BNC cables.
• Remote Terminator: A separate module used for testing installed cables or long runs.

5. સેટઅપ

5.1 બેટરી ઇન્સ્ટોલેશન

The LAN-1 tester is powered by one 9V battery, which is typically pre-installed. If replacement is needed:

1. ખાતરી કરો કે ઉપકરણ બંધ છે.
2. મુખ્ય યુનિટની પાછળ બેટરી કમ્પાર્ટમેન્ટ કવર શોધો.
3. Remove the screw(s) securing the cover and carefully open it.
4. Remove the old 9V battery and disconnect it from the terminals.
5. Connect a new 9V battery, ensuring correct polarity (+ to + and - to -).
6. બેટરીને ડબ્બામાં મૂકો અને કવર બદલો, તેને સ્ક્રુ(ઓ) વડે સુરક્ષિત કરો.

The battery provides power for up to 20 hours of testing.

5.2 Connecting Cables for Testing

Before testing, ensure the cable is disconnected from any active network equipment.

• For patch cables (short cables not installed in walls): Connect one end of the cable to the RJ45 or BNC port on the main unit and the other end to the corresponding port on the remote terminator.
• For installed cables (e.g., wall plates, patch panels): Connect one end of the cable to the RJ45 or BNC port on the main unit. Connect the remote terminator to the other end of the installed cable (e.g., at the wall plate in another room).

6. ઓપરેટિંગ સૂચનાઓ

6.1 પાવરિંગ ચાલુ/બંધ

પીળો દબાવો પાવર button to turn the device on. Press it again to turn the device off.

૭.૧ ટેસ્ટ કરવો

Once the cable is connected, you can perform a test:

1. દબાવો ટેસ્ટ button to initiate a cable test.
2. Automatic Scan (AUTO mode): દબાવો ઓટો button. The tester will automatically scan through each pin (1-8 and G) and display the results sequentially. This is suitable for quick checks.
3. Manual Scan (MAN mode): દબાવો માણસ બટન. દરેક પ્રેસ માણસ button will advance the test to the next pin, allowing for a detailed examination of each connection.
4. કાર્ય રાખો: દબાવો પકડી રાખો button to pause the current display of the pin-out indicator. Press it again to resume scanning.

6.3 Interpreting LED Indicators

The 18 red and green LEDs on the PIN-OUT INDICATOR provide visual feedback on the cable's status:

• લીલો એલઇડી: Indicates a correct connection for the corresponding pin.
• લાલ એલઇડી: Indicates an error for the corresponding pin (e.g., open circuit, short circuit, miswiring).
• કોઈ એલઇડી નથી: May indicate an open circuit or a broken wire for that pin.
• બઝર: An audible buzzer will sound when an error condition is detected, providing an additional alert.

The LEDs on the remote module will mirror the main unit's display for the corresponding pins, allowing for verification of end-to-end continuity.

6.4 બેટરી સ્ટેટસ ચેક

દબાવો બેટ button to check the battery level. The BATT LED will illuminate if the battery has sufficient power. If the BATT LED does not light up or is dim, replace the 9V battery.

7. જાળવણી

7.1 સફાઈ

To ensure the longevity and proper functioning of your LAN-1 tester, keep it clean and free from dust and debris.

• ઉપકરણના બાહ્ય ભાગને નરમ સાથે સાફ કરો, ડીamp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• ખાતરી કરો કે પોર્ટ અથવા બેટરી કમ્પાર્ટમેન્ટમાં કોઈ ભેજ પ્રવેશતો નથી.

7.2 બેટરી રિપ્લેસમેન્ટ

Replace the 9V battery when the BATT LED indicates low power or if the device fails to power on. Refer to Section 5.1 for detailed battery installation instructions.

વપરાયેલી બેટરીનો હંમેશા સ્થાનિક નિયમો અનુસાર નિકાલ કરો.

8. મુશ્કેલીનિવારણ

જો તમને તમારી સાથે સમસ્યાઓ આવે તો Amprobe LAN-1 LAN Cable Tester, refer to the following common problems and solutions:

9. સ્પષ્ટીકરણો

10. વોરંટી માહિતી

આ Amprobe LAN-1 LAN Cable Tester comes with a એક વર્ષની મર્યાદિત વોરંટી. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, neglect, or unauthorized repair.

For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Amprobe customer support.

11. ગ્રાહક આધાર

If you have any questions, require technical assistance, or need to report a problem with your Amprobe LAN-1 LAN Cable Tester, please contact Amprobe customer support.

કૃપા કરીને અધિકારીની મુલાકાત લો Ampઝભ્ભો webસૌથી અદ્યતન સંપર્ક માહિતી અને સહાયક સંસાધનો માટે સાઇટ.

ઑનલાઇન સંસાધનો: www.amprobe.com