GREISINGER 600437

GREISINGER લોગો

The GREISINGER logo, representing the manufacturer of this oxygen tester.

એર યુઝર મેન્યુઅલ માટે GREISINGER GOX 100 ટેસ્ટર

Model: GOX 100 (Part Number: 600437)

1. પરિચય

The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.

2. સલામતી માહિતી

  • ઉપકરણ ચલાવતા પહેલા આ માર્ગદર્શિકાને સારી રીતે વાંચો.
  • ઉપકરણને અતિશય તાપમાન, સીધો સૂર્યપ્રકાશ અથવા વધુ પડતા ભેજના સંપર્કમાં ન લાવો.
  • Ensure the sensor is properly connected before taking measurements.
  • Only use the device for its intended purpose of measuring atmospheric oxygen.
  • ઉપકરણ અને તેના ઘટકોને બાળકોની પહોંચથી દૂર રાખો.
  • સ્થાનિક નિયમો અનુસાર બેટરી અને ઉપકરણનો નિકાલ કરો.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

  • GREISINGER GOX 100 Oxygen Meter
  • Oxygen Sensor (connected via cable)
  • વપરાશકર્તા માર્ગદર્શિકા
  • 9V Block Battery (may not be included, check packaging)

4. સેટઅપ

4.1 બેટરી ઇન્સ્ટોલેશન

  1. ઉપકરણની પાછળના ભાગમાં બેટરીનો ડબ્બો શોધો.
  2. બેટરી કમ્પાર્ટમેન્ટ કવર ખોલો.
  3. Insert a 9V block battery, ensuring correct polarity.
  4. બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.

4.2 સેન્સર કનેક્શન

The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.

GREISINGER GOX 100 with sensor displaying 20.9% O2

The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.

5. ઓપરેટિંગ સૂચનાઓ

5.1 પાવરિંગ ચાલુ/બંધ

  • ઉપકરણને પાવર કરવા માટે, દબાવો ચાલુ/બંધ બટન. ડિસ્પ્લે પ્રકાશિત થશે.
  • ઉપકરણને બંધ કરવા માટે, દબાવો અને પકડી રાખો ચાલુ/બંધ ડિસ્પ્લે બંધ ન થાય ત્યાં સુધી બટન.

5.2 એક માપન લેવું

  • Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
  • Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.

5.3 MIN/MAX Value Recall

  • દબાવો મોડ button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
  • To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).

5.4 Automatic Off Function

The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.

6. માપાંકન

Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.

  1. Ensure the device and sensor are at a stable temperature.
  2. Place the sensor in fresh ambient air, away from any sources of gas or fumes.
  3. દબાવો અને પકડી રાખો cal button until the display indicates calibration mode.
  4. The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
  5. Once calibration is complete, the device will return to normal measurement mode.
GREISINGER GOX 100 with sensor displaying 21.0% O2

The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.

7. જાળવણી

7.1 સેન્સર રિપ્લેસમેન્ટ

The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:

  1. ઉપકરણ બંધ કરો.
  2. Carefully disconnect the old sensor from the cable.
  3. Connect the new, compatible GREISINGER oxygen sensor.
  4. Perform a calibration as described in Section 6.

7.2 સફાઈ

  • Clean the device casinસોફ્ટ સાથે g, damp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
  • Ensure no liquid enters the device or sensor connections.
  • Keep the sensor clean and free from dust or debris.

8. મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણ / ઉકેલ
ઉપકરણ પાવર ચાલુ કરતું નથીબેટરી ઇન્સ્ટોલેશન અને ચાર્જ તપાસો. જો જરૂરી હોય તો બેટરી બદલો.
અચોક્કસ વાંચનPerform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement.
Display shows 'Err' or similarIndicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support.
Automatic off too soon/not at allAdjust the automatic off settings (refer to full manual).

9. ટેકનિકલ વિશિષ્ટતાઓ

પરિમાણમૂલ્ય
માપન શ્રેણી0 - 100 % Oxygen
ઠરાવ0.1%
માપન ચોકસાઈ0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point)
પાવર સપ્લાય9V બ્લોક બેટરી
સંરક્ષણ પ્રકારIP65
પરિમાણો (H x W)106 mm x 67 mm
વજન150 g (device only, approx.)
Cable Length (sensor)0.7 મી
થર્મલ વળતરસ્વયંસંચાલિત

10. વોરંટી અને સપોર્ટ

GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER webસાઇટ

For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official webસાઇટ અથવા તમારા ઉત્પાદન દસ્તાવેજોમાં આપેલી સંપર્ક માહિતી.

© 2024 GREISINGER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.