ઉત્પાદન ઓવરview
The SEM Color Coat is a specialized elastomeric coating designed to restore or change the color of various surfaces, including most vinyl, flexible and rigid plastics, carpet, and velour. This product is formulated as a fade-resistant, flexible, and permanent coating, not a dye.
છબી: આગળ view of the SEM Color Coat aerosol can, showing the product name, "Flexible Coating," and a graphic of a car interior.
સલામતી માહિતી
DANGER! EXTREMELY FLAMMABLE AEROSOL.
Causes skin irritation. Causes serious eye irritation. Harmful or fatal if swallowed. Vapor harmful. Read cautions on back panel.
- ગરમી/તણખા/ખુલ્લી જ્વાળાઓ/ગરમ સપાટીઓથી દૂર રહો. ધુમ્રપાન નિષેધ.
- દબાણયુક્ત કન્ટેનર: ઉપયોગ કર્યા પછી પણ વીંધશો નહીં કે બર્ન કરશો નહીં.
- ખુલ્લી જ્યોત અથવા અન્ય ઇગ્નીશન સ્ત્રોત પર સ્પ્રે કરશો નહીં.
- Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
- સ્થાનિક/પ્રાદેશિક/રાષ્ટ્રીય/આંતરરાષ્ટ્રીય નિયમો અનુસાર સામગ્રી/કન્ટેનરનો નિકાલ કરો.
- ધૂળ/ધુમાડો/ગેસ/ઝાકળ/વરાળ/સ્પ્રે શ્વાસ લેવાનું ટાળો.
- સંભાળ્યા પછી સારી રીતે ધોઈ લો.
- રક્ષણાત્મક મોજા/આંખનું રક્ષણ/ચહેરાનું રક્ષણ પહેરો.
- IF ON SKIN: Wash with plenty of water and soap. If skin irritation occurs, get medical advice/attention.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
- IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
છબી: પાછળ view of the SEM Color Coat aerosol can, displaying safety warnings and product information.
સેટઅપ અને તૈયારી
Proper preparation is crucial for optimal adhesion and longevity of the coating. Follow these steps carefully:
- ભાગો દૂર કરો: Disassemble and remove the parts you intend to paint from the vehicle or item.
- સંપૂર્ણ સફાઈ: Thoroughly clean the surfaces with soap and a degreaser to remove all dirt, grease, and contaminants.
- Light Sanding (Optional but Recommended): For improved adhesion, lightly sand the surface with 800-grit sandpaper.
- અંતિમ સફાઈ: Clean the surface thoroughly again with acetone. This step is very important for proper adhesion. Wear rubber gloves and safety goggles during this step as acetone can burn through gloves and is irritating to eyes.
- તાપમાન: Ensure the application temperature is approximately 21°C (70°F).
છબી: બાજુ view of the SEM Color Coat aerosol can, showing general application instructions and product details.
સંચાલન સૂચનાઓ (એપ્લિકેશન)
Apply the SEM Color Coat in multiple thin layers, allowing adequate drying time between coats. Do not use a heat gun.
- First Coat (Light Dusting): Apply a very light dusting coat. Alternatively, apply an adhesion promoter if desired, which can help the paint adhere better to surfaces.
- Second Coat (Light Dusting): Apply another light dusting coat.
- Subsequent Coats (Coverage): Apply a third coat with more coverage, followed by a fourth and fifth coat for complete and even coverage.
- સૂકવવાનો સમય: Allow 10-15 minutes in between coats. The exact drying time may vary depending on the ambient temperature.
The product is designed to be fast-drying, with a dry time of approximately 1 hour.
છબી: ટોચ view of the SEM Color Coat aerosol can, displaying the model number "15813" and color "Medium Dark Pewter" on the cap.
જાળવણી
Once applied and fully cured, SEM Color Coat provides a durable and flexible finish. To maintain the appearance and longevity of the coating:
- Clean coated surfaces with mild automotive interior cleaners.
- Avoid harsh abrasives or strong chemical solvents that could damage the finish.
- While the product is designed to be permanent and fade-resistant, prolonged exposure to extreme conditions may affect its lifespan.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Poor Adhesion / Chipping | Inadequate surface preparation (e.g., not cleaned thoroughly, no sanding). | Ensure surfaces are meticulously cleaned with degreaser and acetone. Consider light sanding. Apply an adhesion promoter. |
| Uneven Color / Streaks | Too thick coats, insufficient shaking of can, or inconsistent spray pattern. | Apply multiple thin, even coats. Shake can well before and during use. Maintain consistent distance from surface. |
| રંગ મેળ ખાતો નથી | Incorrect color selection for the original surface. | Verify the correct color code for your application. Test on an inconspicuous area first. Note that "Medium Dark Pewter" may vary slightly depending on the original surface's specific shade. |
વિશિષ્ટતાઓ
- બ્રાન્ડ: SEM
- મોડલ નામ: 15813
- રંગ: Medium Dark Pewter (Color Code: #665D56)
- સમાપ્ત પ્રકાર: મેટાલિક
- આઇટમ વોલ્યુમ: 12 Fluid Ounces (12 oz / 340 g)
- આઇટમ ફોર્મ: એરોસોલ
- પેઇન્ટ પ્રકાર: Specialty Elastomeric Coating
- વિશિષ્ટ ઉપયોગો: Vinyl surfaces, flexible and rigid plastics, carpet, velour
- સપાટીની ભલામણ: Carpet (also suitable for vinyl, plastic, velour)
- ઇન્ડોર/આઉટડોર ઉપયોગ: ઇન્ડોર, આઉટડોર
- વિશેષ લક્ષણ: ઝડપી-સૂકવણી
- શુષ્ક સમય: લગભગ 1 કલાક
- પાણી પ્રતિકાર સ્તર: પાણી પ્રતિરોધક નથી
- વસ્તુનું વજન: 1 પાઉન્ડ
- ઉત્પાદન પરિમાણો: 8.38 x 5.63 x 7.88 ઇંચ
- યુપીસી: 646786158131
વધારાના સંસાધનો
For more detailed technical data and information, refer to the official SEM Color Coat Technical Data Sheet or RAP-1.
A relevant link for additional information can be found here: SEM Color Coat Technical Data
વોરંટી અને આધાર
Information regarding product warranty and direct support contacts is not available in this manual. Please refer to the product packaging or the manufacturer's official website for warranty details and customer support options.