1. પરિચય
This manual provides instructions for the installation, operation, and maintenance of your Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This controller is designed to manage residential 24-volt sprinkler systems, offering dual programming capabilities and a rain delay feature.
Image 1.1: The Orbit 27954 Pocket Star 4-Station Plus Indoor Sprinkler Controller. This image displays the front panel of the controller, featuring its digital display and control buttons.
2. સલામતી માહિતી
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage or personal injury.
- This controller is designed for indoor use only. Do not install outdoors or in areas exposed to water.
- કોઈપણ વાયરિંગ અથવા જાળવણી કરતા પહેલા ખાતરી કરો કે પાવર સપ્લાય ડિસ્કનેક્ટ થઈ ગયો છે.
- All electrical wiring should comply with local codes and regulations. If you are unsure, consult a qualified electrician.
- યુનિટ જાતે રિપેર કરવાનો પ્રયાસ કરશો નહીં. બધી સર્વિસિંગ લાયક કર્મચારીઓને સોંપો.
3. સેટઅપ
3.1 અનપેકિંગ
Carefully remove the controller from its packaging. Verify that all components are present. Retain packaging for future use or disposal.
3.2 કંટ્રોલર માઉન્ટ કરવાનું
- Choose a suitable indoor location near a standard 120V AC outlet and away from direct sunlight or extreme temperatures.
- Use the provided mounting template (if applicable) or mark the desired screw locations on the wall.
- Install mounting screws into the wall, leaving the screw heads slightly extended.
- Hang the controller onto the screws using the keyhole slots on the back of the unit.
- Secure the controller by tightening the screws.
3.3.૨.૨ વાયરિંગ
મહત્વપૂર્ણ: વાયરિંગ પહેલાં પાવર ડિસ્કનેક્ટ કરો.
- પાવર કનેક્શન: Plug the controller's power cord into a standard 120V AC outlet.
- વાલ્વ વાયરિંગ: Connect one wire from each sprinkler valve to a numbered terminal (1, 2, 3, 4) on the controller. Connect the common wire from all valves to the terminal labeled 'C' (Common).
- સેન્સર વાયરિંગ (વૈકલ્પિક): If using a rain sensor, connect its wires to the designated sensor terminals. Refer to your sensor's manual for specific wiring instructions.
૫.૧ પ્રારંભિક પાવર-અપ
Once all wiring is complete and secure, connect the power cord to the electrical outlet. The controller display should illuminate, indicating it is powered on.
4. ઓપરેટિંગ સૂચનાઓ
4.1 Understanding the Display and Buttons
The controller features a digital display and several buttons for navigation and programming. Familiarize yourself with the 'Program', 'Set', 'Arrow' (up/down), and 'Rain Delay' buttons.
4.2 Setting Current Time and Date
- Press the 'Set' button repeatedly until 'Set Time' appears on the display.
- Use the 'Arrow' buttons to adjust the hour, then press 'Set' to move to minutes.
- Repeat for minutes, AM/PM, year, month, and day.
૪.૧ પાણી આપવાના સમયપત્રકનું પ્રોગ્રામિંગ
The controller supports dual programs (A and B) for flexible scheduling.
- પ્રોગ્રામ પસંદ કરો: Press the 'Program' button to select Program A or B.
- શરૂઆતનો સમય સેટ કરો: Press 'Set' until 'Start Time' appears. Use 'Arrow' buttons to set the desired start time for the first cycle. The controller supports multiple start times per program.
- રન ટાઈમ સેટ કરો: Press 'Set' until 'Run Time' appears. Use 'Arrow' buttons to set the duration (in minutes) for each station (1-4).
- પાણી આપવાના દિવસો નક્કી કરો: Press 'Set' until 'Watering Days' appears. Use 'Arrow' buttons to select specific days of the week, odd/even days, or interval watering.
4.4 મેન્યુઅલ ઓપરેશન
To manually water a station or all stations:
- Press the 'Manual' button (if available, or follow specific manual run instructions in the display menu).
- Select the desired station or 'All Stations'.
- Set the run time using the 'Arrow' buttons.
- The selected station(s) will begin watering immediately.
૬.૪ વરસાદમાં વિલંબ કાર્ય
The rain delay feature allows you to pause watering for a set period without losing your programmed schedule.
- Press the 'Rain Delay' button.
- Use the 'Arrow' buttons to select the delay duration (e.g., 24, 48, or 72 hours).
- The controller will pause watering for the selected period and resume the schedule automatically afterward.
5. જાળવણી
5.1 સફાઈ
Wipe the controller's exterior with a soft, damp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સનો ઉપયોગ કરશો નહીં, કારણ કે આ ડિસ્પ્લે અથવા સી ને નુકસાન પહોંચાડી શકે છે.asing.
૧.૩ મોસમી બાબતો
As an indoor controller, the unit is not directly exposed to outdoor elements. However, ensure the indoor environment remains within recommended operating temperatures to prolong its lifespan.
6. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| કંટ્રોલર ડિસ્પ્લે ખાલી છે. | કોઈ શક્તિ નથી. | Check power outlet, ensure power cord is securely plugged in. Verify circuit breaker. |
| Sprinklers do not turn on. | Incorrect programming, wiring issue, or rain sensor activated. | Verify watering schedule. Check valve wiring connections. Ensure rain sensor is not active or bypassed. |
| Only some sprinklers turn on. | Faulty valve, wiring issue to specific station. | Check wiring for the non-working station. Test the valve manually. |
| Watering occurs at incorrect times. | Incorrect time/date setting or program schedule. | Verify current time and date. Review and adjust program start times and watering days. |
7. સ્પષ્ટીકરણો
- મોડલ: Orbit 27954 Pocket Star 4-Station Plus Indoor Controller
- બ્રાન્ડ: ભ્રમણકક્ષા
- ભાગ નંબર: 27954
- સ્ટેશનોની સંખ્યા: 4
- ભાગtage: 24 વોલ્ટ (AC)
- માનવ ઇન્ટરફેસ ઇનપુટ: બટનો
- જરૂરી બેટરીઓ: ના
- ઇન્સ્ટોલેશન: ઇન્ડોર
- વિશેષતાઓ: Dual program, Rain delay
- પેકેજ પરિમાણો: 21.84 x 13.46 x 6.6 સેમી
- વજન: 226.8 ગ્રામ
8. વોરંટી અને સપોર્ટ
For warranty information or technical support, please refer to the official Orbit webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.