પરિચય
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide Lamp. કૃપા કરીને ઉપયોગ કરતા પહેલા આ સૂચનાઓ કાળજીપૂર્વક વાંચો અને ભવિષ્યના સંદર્ભ માટે તેને સાચવી રાખો.
The OSRAM HCI-TC 70W/830 WDL G8.5 is a high-performance metal halide lamp featuring POWERBALL ceramic technology and UV filter technology, designed for outdoor use. It provides a warm white light (830 WDL) with a high color rendering index, making it suitable for various lighting applications.
મહત્વપૂર્ણ સલામતી માહિતી
- ઇલેક્ટ્રિક શોકનું જોખમ: Installation and maintenance should only be performed by a qualified electrician. Ensure power is disconnected before handling the lamp.
- બર્ન્સનું જોખમ: Lampઊંચા તાપમાને કામ કરે છે. l ને મંજૂરી આપોamp હેન્ડલિંગ પહેલાં સંપૂર્ણપણે ઠંડુ કરો.
- યુવી કિરણોત્સર્ગ: આ એલamp features UV filter technology, but prolonged direct exposure to light from any high-intensity discharge lamp ટાળવું જોઈએ.
- Lamp Rupture: l ઓપરેટ કરોamps only in suitable enclosed luminaires to contain hot particles in case of lamp ફાટવું
- બેલાસ્ટ સુસંગતતા: Use only with appropriate electronic or magnetic ballasts designed for metal halide lamps of this wattage and type. Incompatible ballasts can lead to lamp નિષ્ફળતા અથવા સલામતી જોખમો.
- નિકાલ: એલનો નિકાલ કરોamps according to local regulations, as they may contain mercury.
સેટઅપ અને ઇન્સ્ટોલેશન
પ્રી-ઇન્સ્ટોલેશન તપાસો
- Verify that the luminaire and ballast are compatible with a 70W G8.5 metal halide lamp.
- Ensure the power supply is disconnected at the circuit breaker before beginning installation.
- એલ તપાસોamp for any visible damage. Do not install a damaged lamp.
સ્થાપન પગલાં
- Ensure the luminaire is clean and free from debris.
- Carefully insert the G8.5 base of the lamp l માંamp holder. Ensure it is seated firmly and correctly. Do not force the lamp.
- Close the luminaire cover securely.
- સર્કિટમાં પાવર પુનઃસ્થાપિત કરો.
Image: The OSRAM HCI-TC 70W/830 WDL G8.5 metal halide lamp, showing its compact design and G8.5 base. This lamp is designed for high-intensity discharge lighting applications.
નોંધ: હંમેશા એલ હેન્ડલamp by its base to avoid touching the glass envelope, as oils from skin can reduce lamp જીવન
ઓપરેટિંગ સૂચનાઓ
- પ્રારંભિક ઇગ્નીશન: પહેલી વાર ઇગ્નીશન પર અથવા પાવર ખોરવાયા પછી, lamp will require a short warm-up period to reach full brightness and stable color.
- વોર્મ-અપ સમય: એલamp typically reaches full light output within 2-5 minutes after ignition.
- ફરીથી હુમલો કરવાનો સમય: જો એલamp is switched off, it requires a cooling period before it can be re-ignited. This re-strike time is typically 5-15 minutes, depending on ambient temperature and ballast type. Attempting to re-ignite too soon can damage the lamp અથવા બેલાસ્ટ.
- ઓપરેટિંગ પોઝિશન: એલamp is designed for operation in any position (h90), but refer to your luminaire's instructions for specific requirements.
જાળવણી
સફાઈ
એલ ખાતરી કરોamp is cool and power is disconnected before cleaning. Gently wipe the outer glass envelope with a clean, dry, lint-free cloth. Do not use abrasive cleaners or liquids that could leave residues or damage the lamp.
Lamp બદલી
એલ બદલોamp when it reaches the end of its rated average lifespan or if it exhibits signs of failure (e.g., flickering, reduced light output, failure to ignite). Always replace with an OSRAM HCI-TC 70W/830 WDL G8.5 lamp or an equivalent approved by OSRAM.
- લ્યુમિનેરથી પાવર ડિસ્કનેક્ટ કરો.
- એલને મંજૂરી આપોamp સંપૂર્ણપણે ઠંડુ કરવા માટે.
- Open the luminaire and carefully remove the old lamp by gently pulling it straight out from the G8.5 socket.
- નવું એલ ઇન્સ્ટોલ કરોamp as described in the "Installation Steps" section.
નિકાલ
મેટલ હલાઇડ એલamps contain small amounts of mercury and other materials that require special disposal. Do not dispose of lamps in general household waste. Contact your local waste management authority for proper recycling or disposal instructions.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Lamp does not ignite. | No power supply; incorrect wiring; faulty lamp; faulty ballast; lamp યોગ્ય રીતે બેઠેલા નથી. | Check power supply and circuit breaker. Verify wiring. Re-seat lamp. Test with a known good lamp or ballast (if safe to do so). Consult a qualified electrician. |
| Lamp flickers or cycles on/off. | એલ ના અંતamp life; incorrect ballast; unstable power supply; overheating luminaire. | એલ બદલોamp. Ensure ballast is compatible. Check power supply stability. Ensure proper ventilation for the luminaire. |
| પ્રકાશનું ઉત્પાદન ઘટ્યું. | એલ ના અંતamp life; dirty lamp or luminaire reflector; incorrect ballast. | એલ બદલોamp. સ્વચ્છ lamp and luminaire. Verify ballast compatibility. |
| Lamp takes too long to re-ignite. | Insufficient cooling time; faulty ignitor/ballast. | Allow adequate cooling time (5-15 minutes). Consult a qualified electrician to check ignitor/ballast. |
વિશિષ્ટતાઓ
| બ્રાન્ડ | OSRAM |
| મોડલ નંબર | HCI-TC 70W/830 WDL G8.5 (Internal: 4008321681799, 999017835046) |
| પ્રકાશ પ્રકાર | મેટલ હલાઇડ |
| વાટtage | 70 વોટ્સ |
| ભાગtage | 96 વોલ્ટ |
| આછો રંગ | Warm White (830 WDL) |
| કલર રેન્ડરિંગ ઇન્ડેક્સ (CRI) | 89 |
| ઇન્ડોર/આઉટડોર વપરાશ | આઉટડોર |
| સામગ્રીનો પ્રકાર | સિરામિક, ધાતુ |
| આધાર પ્રકાર | જી8.5 |
| સરેરાશ આયુષ્ય | 15,000 hours (with electronic ballast); 12,000 hours (with magnetic ballast) |
| વસ્તુનું વજન | 9 ગ્રામ |
વોરંટી માહિતી
OSRAM products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your region and product, please refer to the official OSRAM website or contact OSRAM customer service. Keep your proof of purchase for warranty claims.
ગ્રાહક આધાર
If you have any questions, require technical assistance, or need further support regarding your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide Lamp, please visit the official OSRAM website or contact their customer service department. Contact information can typically be found on the OSRAM webસાઇટ અથવા ઉત્પાદન પેકેજિંગ.
OSRAM Official Webસાઇટ: www.osram.com
