iGaging Digital Protractor User Manual

1. પરિચય

Thank you for choosing the iGaging Digital Protractor. This precision instrument is designed for accurate angle measurements in various applications. Featuring two stainless steel rules (7-inch and 4-inch blades) with photo-etched graduations in both inches and metric units, it provides continuous display readings as the arms are adjusted. The large, clear LCD display, hold function, and reversible reading capability enhance usability. This manual provides essential information for the proper setup, operation, and maintenance of your digital protractor.

2. સલામતી માહિતી

Please read and understand all safety instructions before using the digital protractor. Failure to follow these instructions may result in injury or damage to the device.

• Keep the device away from water and excessive humidity to prevent damage to electronic components.
• Avoid dropping the protractor or subjecting it to strong impacts, as this can affect its accuracy and functionality.
• Handle the stainless steel blades with care to prevent cuts or injuries.
• Do not attempt to disassemble or modify the device. Repairs should only be performed by qualified personnel.
• Store the protractor in a clean, dry place when not in use.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• iGaging Digital Protractor (Model 35-407)
• 7-inch Stainless Steel Blade
• 4-inch Stainless Steel Blade
• CR2032 બેટરી (પહેલાથી ઇન્સ્ટોલ કરેલ)
• Extra CR2032 Battery

4. સેટઅપ

The iGaging Digital Protractor comes ready for use with a pre-installed battery. Follow these steps for initial setup:

1. અનપેકીંગ: Carefully remove the digital protractor and its accessories from the packaging.
2. બ્લેડ જોડાણ: The protractor includes two interchangeable stainless steel blades (7-inch and 4-inch). Select the appropriate blade for your task and ensure it is securely attached to the main body. The blades are designed to slide into a slot and be held by the blade lock mechanism.
3. પાવર ચાલુ: દબાવો ચાલુ/બંધ button to turn on the device. The LCD display should illuminate.
4. શૂન્ય Before taking measurements, it is recommended to zero the protractor. Close the blades completely or set them to your desired reference angle, then press the શૂન્ય button. The display will show 0.00°, indicating the new reference point.

5. ઓપરેટિંગ સૂચનાઓ

The digital protractor is designed for intuitive operation. Here are the key functions:

5.1 માપ લેવું

1. સ્થિતિ: Place the protractor on the surface or object you wish to measure. Adjust the movable blade until it aligns with the angle you need to determine.
2. ડિસ્પ્લે વાંચવું: The angle will be continuously displayed on the large LCD screen as you adjust the blades. The resolution is 0.05 degrees.
3. Inside and Outside Angles: The protractor can measure both inside and outside angles. Simply position the blades accordingly.

Figure 1: Digital Protractor displaying an angle measurement.

5.2 કાર્ય રાખો

• દબાવો HOLD/Rev. button once to freeze the current reading on the display. This is useful for recording measurements in difficult-to-view હોદ્દાઓ
• દબાવો HOLD/Rev. button again to release the hold and resume continuous measurement.

5.3 Reversible Reading

• આ HOLD/Rev. button also controls the display orientation. If the protractor is inverted, pressing and holding the HOLD/Rev. button will flip the display reading to be right-side up, improving readability.

5.4 પાવર બંધ

• દબાવો ચાલુ/બંધ button to manually turn off the device.
• The protractor features an automatic power-off function after 5 minutes of non-use to conserve battery life.

Figure 2: Close-up of the digital display and control buttons (ON/OFF, ZERO, HOLD/Rev.).

6. જાળવણી

Proper maintenance ensures the longevity and accuracy of your digital protractor.

6.1 સફાઈ

• Wipe the protractor clean with a soft, dry cloth after each use.
• હઠીલા ગંદકી માટે, થોડો ડીamp cloth can be used, but ensure no moisture enters the electronic components.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the display or finish.

6.2 બેટરી રિપ્લેસમેન્ટ

The protractor uses one 3V CR2032 lithium coin cell battery. The battery life is approximately 1 year under normal use. Replace the battery when the display becomes dim or does not turn on.

1. Locate the battery compartment cover on the back of the digital module.
2. Use a small screwdriver or coin to gently open the battery compartment.
3. જૂની CR2032 બેટરી દૂર કરો.
4. ધન (+) બાજુ ઉપર તરફ રાખીને નવી 3V CR2032 બેટરી દાખલ કરો.
5. બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.
6. Turn on the protractor and verify that the display is clear.

7. મુશ્કેલીનિવારણ

If you encounter issues with your digital protractor, refer to the following common problems and solutions:

8. સ્પષ્ટીકરણો

• માપન શ્રેણી: 0-360 ડિગ્રી
• ઠરાવ: 0.05 degrees (5/100th of a degree)
• પુનરાવર્તિતતા: 0.1 ડિગ્રી
• બ્લેડ: 7-inch and 4-inch Stainless Steel
• પ્રદર્શન: Large, clear LCD
• પાવર સ્ત્રોત: 1 x 3V CR2032 Lithium Coin Cell Battery (included, with extra battery)
• બેટરી જીવન: આશરે 1 વર્ષ
• ઑટો પાવર-ઑફ: 5 મિનિટ નો ઉપયોગ કર્યા પછી
• મોડલ નંબર: 35-407
• પેકેજ પરિમાણો: 8.19 x 2.83 x 1.46 ઇંચ
• વસ્તુનું વજન: 5.29 ઔંસ

9. વોરંટી અને સપોર્ટ

iGaging stands behind the quality of its products. For warranty information, technical support, or service inquiries, please visit the official iGaging webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

iGaging Official Webસાઇટ: Visit the iGaging Store on Amazon