MEAN WELL MDR-60-24 DIN Rail Power Supply User Manual

1. પરિચય

This manual provides essential information for the safe and efficient operation of the MEAN WELL MDR-60-24 DIN Rail Power Supply. The MDR-60-24 is an industrial-grade switching power supply designed for reliable 24V DC power delivery in various applications.

મુખ્ય લક્ષણો:

• 60W output power (24V at 2.5A continuous current).
• High efficiency (87% typical).
• Universal 85-264VAC / 120-370VDC input voltage સુસંગતતા.
• એડજસ્ટેબલ આઉટપુટ વોલ્યુમtage શ્રેણી (24V થી 30V).
• બિલ્ટ-ઇન ઓવર-વોલtage, over-load, short-circuit, and over-temperature protection.
• Compact metal housing with IP20 protection.
• DIN rail mountable for easy installation.
• Safety-certified with CE, RoHS, and UL60950-1 compliance.

2. સલામતી માહિતી

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• વિદ્યુત સંકટ: Ensure power is disconnected before installation or maintenance. Only qualified personnel should perform electrical connections.
• વેન્ટિલેશન: ઓવરહિટીંગ અટકાવવા માટે યુનિટની આસપાસ પૂરતો હવા પ્રવાહ સુનિશ્ચિત કરો. વેન્ટિલેશન ઓપનિંગ્સને અવરોધશો નહીં.
• પર્યાવરણ: Install in a dry, well-ventilated area, free from excessive dust, moisture, and corrosive substances. Operate within specified temperature and humidity ranges.
• ગ્રાઉન્ડિંગ: Proper grounding is essential for safety. Connect the protective earth (PE) terminal to a reliable ground.
• આઉટપુટ ઓવરલોડ: Do not exceed the rated output power. Overloading can damage the unit and pose a fire risk.
• ભાગtage ગોઠવણ: આઉટપુટ વોલ્યુમને સમાયોજિત કરોtage only when the unit is powered on and under no load, using a suitable insulated tool.

3. સેટઅપ અને ઇન્સ્ટોલેશન

The MDR-60-24 is designed for DIN rail mounting (TS-35/7.5 or TS-35/15). Follow these steps for installation:

3.1 માઉન્ટ કરવાનું

1. Ensure the DIN rail is securely installed in a suitable enclosure.
2. પાવર સપ્લાયની ઉપરની ધારને DIN રેલ પર હૂક કરો.
3. Push the bottom of the power supply firmly until it clicks into place on the DIN rail.
4. Verify the unit is securely attached and cannot be easily dislodged.

Image: Top-angled view of the MDR-60-24 power supply, highlighting the integrated DIN rail mounting clip at the bottom for secure installation on a standard DIN rail.

3.2 વાયરિંગ કનેક્શન્સ

All connections are made via screw terminals. Refer to the labels on the unit for correct terminal identification.

છબી: આગળ view of the MDR-60-24 power supply, clearly showing the input (L, N, PE) and output (+V, -V) screw terminals, along with the DC OK indicator and voltage ગોઠવણ પોટેન્શિયોમીટર.

1. Input (AC/DC): Connect the AC input (Line, Neutral) or DC input to the "L" and "N" terminals. Connect the protective earth to the "PE" terminal. Ensure correct polarity for DC input.
2. આઉટપુટ (DC): Connect the positive load wire to the "+V" terminal and the negative load wire to the "-V" terminal.
3. ટર્મિનલ્સ કડક કરો: Ensure all screw terminals are tightened securely to prevent loose connections and potential hazards.

નોંધ: Use appropriate wire gauges for the current rating to avoid overheating.

4. ઓપરેટિંગ સૂચનાઓ

4.1 પાવર ચાલુ/બંધ

• Once all connections are secure, apply input power to the unit.
• The "DC OK" indicator LED will illuminate when the output voltage ઉલ્લેખિત શ્રેણીની અંદર છે.
• To power off, disconnect the input power.

4.2 આઉટપુટ વોલ્યુમtage ગોઠવણ

આઉટપુટ વોલ્યુમtage can be adjusted from 24V to 30V using the potentiometer located on the front panel.

• With the unit powered on and under no load, use a small, insulated screwdriver to carefully turn the "V ADJ" potentiometer.
• Turn clockwise to increase the voltage, counter-clockwise to decrease.
• આઉટપુટ વોલ્યુમ મોનિટર કરોtage with a multimeter to ensure it is set to the desired level.

5. જાળવણી

The MDR-60-24 power supply is designed for long-term, reliable operation with minimal maintenance. However, periodic checks are recommended:

• સફાઈ: Keep the unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• વેન્ટિલેશન: ખાતરી કરો કે વેન્ટિલેશન ઓપનિંગ્સ અવરોધિત નથી.
• જોડાણો: Periodically check screw terminals for tightness, especially in environments with vibration.
• પર્યાવરણીય પરિસ્થિતિઓ: ખાતરી કરો કે કાર્યકારી વાતાવરણ નિર્દિષ્ટ તાપમાન અને ભેજ શ્રેણીમાં રહે છે.

છબી: બાજુ view of the MDR-60-24 power supply, illustrating the heat dissipation fins designed to maintain optimal operating temperature through passive air cooling.

6. મુશ્કેલીનિવારણ

જો વીજ પુરવઠો અપેક્ષા મુજબ કાર્ય કરી રહ્યો નથી, તો નીચેની મુશ્કેલીનિવારણ માર્ગદર્શિકાનો સંદર્ભ લો:

If the problem persists after following these steps, contact technical support.

7. સ્પષ્ટીકરણો

Detailed technical specifications for the MEAN WELL MDR-60-24 power supply:

• મોડલ: MDR-60-24
• આઉટપુટ વોલ્યુમtage: 24V ડીસી
• આઉટપુટ વર્તમાન: 2.5A
• આઉટપુટ પાવર: 60W
• ઇનપુટ વોલ્યુમtage રેન્જ: 85-264VAC / 120-370VDC
• કાર્યક્ષમતા: 87% (સામાન્ય)
• લહેર અને અવાજ: <150mVp-p
• રેખા નિયમન: ±1.0%
• લોડ નિયમન: ±1.0%
• ભાગtage એડજસ્ટમેન્ટ રેન્જ: 24V - 30V
• રક્ષણ: ઓવર-વોલ્યુમtage, Over-load, Short-circuit, Over-temperature
• ઓપરેટિંગ તાપમાન: -30°C થી +70°C
• ભેજ: 20-90% આરએચ નોન-કન્ડેન્સિંગ
• પરિમાણો (લંબાઈ x પહોળાઈ x ઊંચાઈ): 129mm x 38mm x 97mm (5.08 in x 1.50 in x 3.82 in)
• સલામતી ધોરણો: UL60950-1, TUV EN60950-1, CE, RoHS
• EMC ધોરણો: EN55032, EN61000-3-2, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11

8. વોરંટી અને સપોર્ટ

MEAN WELL products are manufactured to high-quality standards. For warranty information, please refer to the official MEAN WELL webતમારા અધિકૃત વિતરકને સાઇટ પર મોકલો અથવા સંપર્ક કરો.

For technical assistance or support, please contact your product supplier or visit the MEAN WELL official website for resources and contact information.