1. પરિચય
This manual provides detailed instructions for the installation, operation, and maintenance of your Docooler Digital Tachometer K975. This 52mm (2-inch) LCD gauge is designed for automotive applications, providing accurate engine RPM readings from 0 to 9999 RPM with an integrated warning light feature. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. ઉત્પાદન સુવિધાઓ
- Diameter: 52mm (2 inches)
- Power: DC 10-15V (12V Professional)
- Display: Blue Digital LED Readout
- Measurement Range: 0-9999 RPM
- Warning Point: Activates at 5000 RPM
- High accuracy and easy operation
- ઇન્સ્ટોલેશન સૂચનાઓ સાથે આવે છે
3. સ્પષ્ટીકરણો
| એકમ | RPM |
| માપન શ્રેણી | 0~9999 RPM |
| Warning Point | 5000 RPM |
| શક્તિ | 12V DC, Max. 0.3A |
| એલસીડી કદ | Approx. 52mm / 2 inches |
| Tachometer Size (Dia.*H) | ૧૩ x ૧૩.૫ સેમી / ૫.૧૨ x ૫.૩૧ ઇંચ |
| એકંદર પરિમાણો (L x W x H) | 17 x 12 x 7.8 સેમી / 6.7 x 4.7 x 3.1 ઇંચ |
| રંગ | કાળો |
| સામગ્રી | પ્લાસ્ટિક |
| મોડલ નંબર | K975 |
| યુપીસી | 519752202711 |
4. પેકેજ સામગ્રી
પેકેજ ખોલતી વખતે, કૃપા કરીને ખાતરી કરો કે બધી વસ્તુઓ હાજર છે અને તેને કોઈ નુકસાન થયું નથી:
- 1x Docooler Digital Tachometer K975
Note: Additional mounting hardware or wiring may be included depending on the specific kit. Refer to the packaging for a complete list.
5. સેટઅપ અને ઇન્સ્ટોલેશન
Installation of the Docooler Digital Tachometer K975 requires basic automotive electrical knowledge. If you are unsure about any steps, it is recommended to seek professional assistance.
5.1 સલામતી સાવચેતીઓ
- Disconnect the vehicle's battery before starting any electrical work.
- શોર્ટ સર્કિટ અટકાવવા માટે ખાતરી કરો કે બધા જોડાણો સુરક્ષિત અને યોગ્ય રીતે ઇન્સ્યુલેટેડ છે.
- Mount the gauge in a location that does not obstruct the driver's view અથવા વાહન નિયંત્રણમાં દખલ કરે છે.
5.2 Mounting the Tachometer
The tachometer is designed for a 52mm (2-inch) diameter mounting hole. It can be dash-mounted or mounted using the included stand.
- Choose a suitable, flat surface for mounting.
- If flush mounting, cut a 52mm diameter hole. If using the stand, secure the stand to the desired location using appropriate fasteners.
- Insert the tachometer into the mounting location or attach it to the stand.
- Secure the tachometer firmly in place.
Image shows the front view of the Docooler Digital Tachometer K975. The circular gauge features a black casing and a blue digital LCD screen displaying '0' RPM. Below the RPM reading, 'WARNING' and 'RPM' are visible. The gauge is mounted on a black stand.
5.3 વાયરિંગ સૂચનાઓ
The tachometer typically has three wires for connection:
- લાલ વાયર: Connect to a switched 12V DC power source (e.g., ignition switch ACC).
- કાળો વાયર: Connect to a reliable vehicle ground point.
- Green/Yellow/White Wire (Signal): Connect to the engine's RPM signal wire. This is typically found at the ignition coil negative terminal, ECU tachometer output, or specific engine sensor. Consult your vehicle's service manual for the exact location of the RPM signal wire.
Ensure all connections are soldered or crimped securely and insulated with electrical tape or heat shrink tubing.
6. ઓપરેટિંગ સૂચનાઓ
Once properly installed and wired, the Docooler Digital Tachometer K975 operates automatically when the vehicle's ignition is turned on.
- પાવર ચાલુ: When the ignition is turned to the ACC or ON position, the tachometer will power on, and the blue digital LED display will illuminate.
- RPM ડિસ્પ્લે: The display will show the current engine RPM in numerical format.
- ચેતવણી પ્રકાશ: The integrated warning light will activate when the engine RPM reaches or exceeds 5000 RPM. This serves as a visual alert for high engine speeds.
7. જાળવણી
The Docooler Digital Tachometer K975 is designed for durability and requires minimal maintenance.
- સફાઈ: ડિસ્પ્લે સાફ કરવા માટે નરમ, સૂકા કપડાનો ઉપયોગ કરો અને casing. Avoid abrasive cleaners or solvents that could damage the plastic or screen.
- કનેક્શન તપાસ: વાયરિંગ કનેક્શન સુરક્ષિત અને કાટથી મુક્ત રહે તેની ખાતરી કરવા માટે સમયાંતરે તેનું નિરીક્ષણ કરો.
- પર્યાવરણીય સંરક્ષણ: While designed for automotive use, avoid exposing the gauge to extreme moisture or direct, prolonged sunlight when possible to extend its lifespan.
8. મુશ્કેલીનિવારણ
If you encounter issues with your tachometer, refer to the following common problems and solutions:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Tachometer does not power on. | No power to the red wire; poor ground connection. | Check 12V power supply and ground connections. Ensure ignition is on. |
| Display shows "0" or incorrect RPM. | Incorrect or loose signal wire connection; incompatible signal type. | Verify the signal wire is correctly connected to the RPM source. Ensure the signal source is active. Some vehicles may require a tach adapter. |
| RPM reading is sluggish or jumps erratically. | Interference in the signal wire; poor signal quality; loose connections. | Ensure signal wire is routed away from high-voltage cables. Check all wiring connections for tightness and proper insulation. |
| Warning light does not activate at 5000 RPM. | Faulty internal component; incorrect RPM signal. | Verify RPM reading accuracy. If RPM is correct and light still fails, the unit may be faulty. |
9. વોરંટી અને સપોર્ટ
Docooler products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or contact your retailer. For technical support or inquiries, please visit the official Docooler webસાઇટ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો.
Docooler Store Link: Visit the Docooler Store on Amazon