1. પરિચય
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Metabo DKNG 40/50 Air Compressed Stapler/Nailer. Please read these instructions carefully before using the tool to ensure proper function and user safety. This tool is designed for driving staples and nails into various materials, suitable for both amateur and professional applications.
2. સલામતી સૂચનાઓ
Always observe basic safety precautions to reduce the risk of personal injury and damage to the tool.
- આંખનું રક્ષણ પહેરો: Always wear safety glasses or goggles that comply with applicable standards to protect against flying debris.
- શ્રવણ સુરક્ષા પહેરો: Prolonged exposure to noise from pneumatic tools can cause hearing damage.
- હવા પુરવઠો ડિસ્કનેક્ટ કરો: Always disconnect the air supply before making adjustments, clearing jams, servicing, or when the tool is not in use.
- ક્યારેય પોતાની જાત કે બીજા પર આંગળી ના ફેરવો: The tool can discharge fasteners unexpectedly.
- Check Air Pressure: Ensure the air compressor's pressure setting is within the recommended range for the tool.
- સુરક્ષિત વર્કપીસ: Always ensure the material being worked on is stable and secure.
- યોગ્ય ફાસ્ટનર્સનો ઉપયોગ કરો: Only use staples and nails of the specified type and length (Type 90 + ES, 15-50 mm).
- હાથ સાફ રાખો: Do not place hands or fingers near the fastener discharge area.
- યોગ્ય વેન્ટિલેશન: સારી રીતે વેન્ટિલેટેડ વિસ્તારમાં ઉપયોગ કરો.
3. ઉત્પાદન ઓવરview
The Metabo DKNG 40/50 is a robust air-powered tool designed for efficient fastening. Key components include:
- મેગેઝિન: સ્ટેપલ્સ અથવા ખીલા પકડી રાખે છે.
- ટ્રિગર: ફાયરિંગ મિકેનિઝમ સક્રિય કરે છે.
- એર ઇનલેટ: કોમ્પ્રેસ્ડ એર હોઝ માટે કનેક્શન પોઈન્ટ.
- Safety Nose: Prevents accidental firing by requiring contact with the workpiece.
- હેન્ડલ: આરામદાયક પકડ માટે અર્ગનોમિકલી ડિઝાઇન કરેલ.
આકૃતિ 1: ફ્રન્ટ view of the Metabo DKNG 40/50, showing the magazine and trigger.
4. સેટઅપ
Before operating the tool, ensure proper setup.
૨.૧ એર કોમ્પ્રેસર સાથે જોડાણ
- Ensure your air compressor is turned off and depressurized.
- Connect a suitable air hose to the air inlet of the stapler/nailer.
- Set the air compressor's output pressure to the recommended operating range (refer to specifications for details, typically around 6-8 bar or 90-120 PSI). The tool consumes approximately 0.66 liters of air per stroke.
- Turn on the air compressor and allow it to build pressure.
4.2 Loading Fasteners
The Metabo DKNG 40/50 uses Type 90 + ES staples and nails with lengths ranging from 15 mm to 50 mm.
- એર સપ્લાયમાંથી ટૂલને ડિસ્કનેક્ટ કરો.
- Open the magazine according to the tool's design (usually by pressing a latch and sliding it open).
- Insert a strip of compatible staples or nails into the magazine, ensuring they are oriented correctly.
- મેગેઝિન ચોંટી ન જાય ત્યાં સુધી તેને સુરક્ષિત રીતે બંધ કરો.
આકૃતિ 2: કોણીય view of the Metabo DKNG 40/50, highlighting the magazine and air inlet.
5. ઓપરેટિંગ સૂચનાઓ
Follow these steps for safe and effective operation.
- હવા પુરવઠો જોડો: Reconnect the air hose to the tool.
- પોઝિશન ટૂલ: Place the safety nose firmly against the workpiece where the fastener is to be driven.
- ફાયર ફાસ્ટનર: Squeeze the trigger to drive the staple or nail. The safety nose must be depressed for the tool to fire.
- સ્થાન બદલો: વર્કપીસ પરથી ટૂલ ઉપાડો અને આગામી ફાસ્ટનર માટે ફરીથી ગોઠવો.
5.1 Depth Adjustment (if applicable)
Some models feature a depth adjustment mechanism. If present, adjust the depth by rotating the depth adjustment knob or lever to achieve the desired fastener depth. Test on a scrap piece of material before final application.
આકૃતિ 3: ઉપરથી નીચે view of the Metabo DKNG 40/50, showing the overall design.
6. જાળવણી
નિયમિત જાળવણી શ્રેષ્ઠ કામગીરી સુનિશ્ચિત કરે છે અને તમારા સાધનનું આયુષ્ય લંબાવે છે.
- લુબ્રિકેશન: Apply a few drops of pneumatic tool oil into the air inlet before each use or after every few hours of continuous operation. This lubricates internal components.
- સફાઈ: Keep the tool clean and free of dust and debris. Use compressed air to blow out the magazine and firing mechanism.
- વસ્ત્રો માટે તપાસો: Periodically inspect the safety nose, trigger, and air connections for signs of wear or damage. Replace worn parts immediately.
- સંગ્રહ: Store the tool in a dry, clean environment when not in use. Disconnect from air supply.
7. મુશ્કેલીનિવારણ
સામાન્ય સમસ્યાઓ અને તેમના ઉકેલો માટે આ વિભાગનો સંદર્ભ લો.
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| સાધન ચાલુ નથી થઈ રહ્યું | No air supply; Low air pressure; Empty magazine; Safety nose not depressed; Jammed fastener | Check air connection and compressor; Increase air pressure; Reload fasteners; Ensure safety nose is fully depressed; Clear jam (disconnect air first) |
| ફાસ્ટનર્સ સંપૂર્ણપણે ચાલતા નથી | Low air pressure; Incorrect fastener length; Hard material; Depth adjustment incorrect | Increase air pressure; Use appropriate fastener length; Adjust depth setting; Consider pre-drilling for very hard materials |
| એર લીક્સ | Loose air fitting; Damaged O-rings or seals | Tighten air fittings; Replace damaged O-rings or seals (consult a qualified technician if unsure) |
| Fasteners jamming frequently | Incorrect fastener type/size; Damaged magazine; Worn driver blade | Use correct fasteners; Inspect and replace damaged magazine parts; Replace worn driver blade |
8. સ્પષ્ટીકરણો
Detailed technical specifications for the Metabo DKNG 40/50.
- મોડલ નંબર: 601562500
- ઉત્પાદક: METABO SAS
- સામગ્રી: સ્ટીલ
- મુખ્ય પ્રકાર: 90 + ES
- નખની લંબાઈ: ૧.૫ - ૧૦ મીમી
- Air Consumption per Stroke: 0.66 એલ
- વજન: 1.1 કિલોગ્રામ
- ઉત્પાદનના પરિમાણો (L x W x H): 29.5 x 6 x 23.5 સેમી
- હેતુપૂર્વક ઉપયોગ: Hobbyist, Professional
9. વોરંટી અને સપોર્ટ
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Metabo products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, spare parts, or service, please contact your authorized Metabo dealer or visit the official Metabo website for regional service centers. Information regarding spare parts availability may vary by region.
