પરિચય
The Kidde i12060 is an AC-powered, hardwired ionization smoke alarm designed to provide early warning of smoke and fire. This alarm features a front-loading battery backup for continuous operation during power outages and a hush feature to temporarily silence nuisance alarms. It is designed for residential use and can interconnect with up to 24 compatible Kidde devices.
મહત્વપૂર્ણ સલામતી માહિતી
Please read this manual thoroughly before installation and operation. Keep this manual for future reference. This device detects smoke particles. It does not detect heat, flames, or carbon monoxide. For complete fire safety, ensure your home has both smoke and carbon monoxide alarms.
ચેતવણી: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, refer to www.P65Warnings.ca.gov.
સેટઅપ અને ઇન્સ્ટોલેશન
પેકેજ સામગ્રી:
- One Kidde i12060 120-volt AC wire-in smoke alarm
- One 9-volt battery
- ઑપરેટિંગ અને ઇન્સ્ટોલેશન સૂચનાઓ
Location Guidelines:
- Install smoke alarms on every level of your home, inside each bedroom, and outside each sleeping area.
- બારીઓ, દરવાજા અથવા ફોર્સ્ડ-એર વેન્ટ્સની નજીક ઇન્સ્ટોલ કરવાનું ટાળો જ્યાં ડ્રાફ્ટ્સ ધુમાડા શોધવામાં દખલ કરી શકે છે.
- Do not install in kitchens, garages, or furnace rooms where combustion particles are normally present, as this may cause nuisance alarms.
- વિશિષ્ટ ઇન્સ્ટોલેશન આવશ્યકતાઓ માટે સ્થાનિક બિલ્ડીંગ કોડ્સનો સંદર્ભ લો.
Wiring and Mounting:
- પાવર બંધ: Ensure power to the circuit is turned off at the main fuse box or circuit breaker.
- વાયરિંગ કનેક્ટ કરો: The alarm comes with a pre-stripped wiring harness with tinned strands. Connect the appropriate wires (black to hot, white to neutral, orange to interconnect if applicable) to your household wiring using wire nuts.
- માઉન્ટિંગ કૌંસ જોડો: Secure the mounting bracket to the ceiling or wall using the provided screws. The large mounting base helps cover imperfections.
- બેટરી ઇન્સ્ટોલ કરો: Open the front battery door and insert the included 9-volt battery. Ensure the battery pull tab is removed to activate the battery. The front-loading battery door allows for easy battery replacement without removing the alarm from its base.
- Attach Alarm to Bracket: એલાર્મને માઉન્ટિંગ બ્રેકેટ સાથે સંરેખિત કરો અને જ્યાં સુધી તે સ્થાને લૉક ન થાય ત્યાં સુધી ઘડિયાળની દિશામાં ફેરવો.
- પાવર પુન Restસ્થાપિત કરો: Turn the power back on at the main fuse box or circuit breaker.
- ટેસ્ટ એલાર્મ: Press and hold the test button for a few seconds until the alarm sounds. This confirms proper operation.
Figure 1: Kidde i12060 Hardwired Smoke Detector Alarm. This image shows the complete smoke alarm unit, highlighting its compact design and the front-loading battery compartment.
ઓપરેટિંગ સૂચનાઓ
સામાન્ય કામગીરી:
During normal operation, the red LED indicator will flash approximately once every 30-40 seconds, indicating that the alarm is receiving power and functioning correctly.
એલાર્મનું પરીક્ષણ:
Test the alarm weekly by pressing and holding the "Push and Hold to Test" button. The alarm will sound a loud, pulsating horn. Release the button to stop the alarm. This tests the unit's electronic circuitry, horn, and battery.
Figure 2: A person pressing the test button on a ceiling-mounted Kidde smoke detector. This demonstrates the simple action required to test the alarm's functionality.
હશ સુવિધા:
The hush feature temporarily silences nuisance alarms caused by non-emergency situations like cooking smoke. To activate, press the "Hush" button. The alarm will be desensitized for approximately seven minutes. During this time, the alarm will chirp every 30 to 40 seconds. If smoke density is too high, the hush feature will be overridden, and the alarm will sound. The alarm automatically resets after seven minutes.
જાળવણી
બેટરી રિપ્લેસમેન્ટ:
9-વોલ્ટની બેટરી ou દરમિયાન બેકઅપ પાવર પૂરી પાડે છેtages. Replace the battery at least once a year, or immediately when the alarm chirps approximately once a minute (indicating a low battery). To replace, open the front battery door, remove the old battery, and insert a new 9-volt battery. Close the battery door securely.
Cleaning Your Alarm:
Clean your smoke alarm at least once a month to remove dust and debris. Use a soft brush or a vacuum cleaner with a soft brush attachment to clean the exterior of the alarm and the openings. Do not paint the alarm.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Alarm chirps once every minute | ઓછી બેટરી | 9-વોલ્ટની બેટરી બદલો. |
| ઉપદ્રવ એલાર્મ (ખોટા એલાર્મ) | Cooking smoke, steam, dust, high humidity | Use the hush feature. Relocate the alarm if nuisance alarms persist due to environmental factors. Clean the alarm. |
| પરીક્ષણ દરમિયાન એલાર્મ વાગતો નથી | No power, dead battery, faulty unit | Check power supply. Replace battery. If still not working, replace the unit. |
| એલાર્મ સતત વાગે છે | Presence of smoke/fire, or unit malfunction | Evacuate immediately if smoke/fire is present. If no smoke/fire, use hush feature or replace unit if malfunction persists. |
વિશિષ્ટતાઓ
- મોડલ: i12060
- તપાસ પદ્ધતિ: આયનીકરણ
- પાવર સ્ત્રોત: 120VAC, 9V Battery Backup
- સાંભળી શકાય તેવી ચેતવણી: 85dB @ 10 ft. Horn
- વિઝ્યુઅલ ચેતવણી: લાલ એલઇડી
- વ્યાસ: 5 ઇંચ
- ઊંચાઈ: 1-3/4 ઇંચ
- Interconnection Capability: 24 એકમો સુધી
- Hush Button: હા
- ટેસ્ટ બટન: હા
- Locking Pin: હા
- ઓપરેટિંગ તાપમાન: 40°F થી 100°F (4.4°C થી 37.8°C)
- ધોરણો: યુએલ લિસ્ટેડ
- ઉત્પાદકની વોરંટી: 10 વર્ષની મર્યાદિત વોરંટી
- GTIN: 047871260546
- Model Number (Mfr Part Number): 21026054
વોરંટી માહિતી
The Kidde i12060 smoke alarm comes with a 10-year limited warranty from the manufacturer. For detailed warranty terms and conditions, please refer to the documentation included with your product or contact Kidde customer support.
આધાર અને સંપર્ક
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Kidde customer support. For comprehensive fire preparedness information and local safety guidelines, contact your local fire department.