1. પરિચય
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.
2. સલામતી સૂચનાઓ
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.
- બધી સૂચનાઓ વાંચો: Familiarize yourself with the tool's controls and proper use.
- આંખનું રક્ષણ પહેરો: હંમેશા સાઇડ શિલ્ડ સાથે સલામતી ગોગલ્સ અથવા સલામતી ચશ્મા પહેરો.
- શ્રવણ સુરક્ષા પહેરો: ઓપરેશન દરમિયાન ઇયરપ્લગ અથવા ઇયરમફનો ઉપયોગ કરો.
- સુરક્ષિત વર્કપીસ: હંમેશા clamp અથવા અન્યથા કાપતી વખતે હલનચલન અટકાવવા માટે વર્કપીસને સુરક્ષિત કરો.
- હાથ સાફ રાખો: Never place hands near the cutting blade.
- સ્વચ્છ કાર્યક્ષેત્ર જાળવો: અવ્યવસ્થિત વિસ્તારો અકસ્માતોને આમંત્રણ આપે છે.
- વિસ્ફોટક વાતાવરણમાં કામ કરશો નહીં: જ્વલનશીલ પ્રવાહી અથવા વાયુઓની હાજરીમાં પાવર ટૂલ્સનો ઉપયોગ કરશો નહીં.
- Unplug Before Adjustments: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
- Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
- ઓવરરીચિંગ ટાળો: દરેક સમયે યોગ્ય પગ અને સંતુલન જાળવો.
3. ઉત્પાદન ઓવરview
The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.
આકૃતિ 1: ઉપરview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.
મુખ્ય ઘટકો:
- Aluminum Base and Upper Table: સ્થિરતા અને ટકાઉપણું પૂરું પાડે છે.
- Electronic Variator: Allows adjustment of blade speed.
- ટિલ્ટિંગ મિકેનિઝમ: Enables bevel cuts up to 45°.
- Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
- ધૂળ નિષ્કર્ષણ બંદર: ધૂળ સંગ્રહ પ્રણાલીને જોડવા માટે.
4. સેટઅપ
મીટર સો ચલાવતા પહેલા, ખાતરી કરો કે તે યોગ્ય રીતે સેટ અને સુરક્ષિત છે.
- અનપેકીંગ: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
- માઉન્ટ કરવાનું: Securely mount the miter saw to a stable workbench using appropriate fasteners.
- બ્લેડ ઇન્સ્ટોલેશન: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
- Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
- ધૂળ નિષ્કર્ષણ: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.
5. ઓપરેટિંગ સૂચનાઓ
The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.
૫.૧. પાવર અને સ્પીડ કંટ્રોલ
- The saw operates at 1600W power.
- Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.
5.2. Making Cuts
- Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
- Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
- Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
- Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
- General Cutting Capacity:
- 90° (Straight): 155 x 25 mm / 65 x 77 mm
- 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
- 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
- 45° Compound (Miter & Bevel): 75 x 20 mm
- ઓપરેશન: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.
6. જાળવણી
Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.
- સફાઈ: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
- બ્લેડ નિરીક્ષણ: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
- બ્રશ નિરીક્ષણ: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
- લુબ્રિકેશન: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
- ફાસ્ટનર તપાસ: Periodically check all nuts, bolts, and screws for tightness. Tighten any loose fasteners.
7. મુશ્કેલીનિવારણ
આ વિભાગ તમારા મીટર સો સાથે તમને આવી શકે તેવી સામાન્ય સમસ્યાઓને સંબોધિત કરે છે.
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| સો શરૂ થતું નથી | No power supply; faulty switch; worn carbon brushes. | Check power connection and circuit breaker. Test switch. Inspect and replace carbon brushes if necessary. |
| અતિશય કંપન અથવા અવાજ | Loose blade; damaged blade; loose mounting bolts; worn bearings. | Tighten blade nut. Replace damaged blade. Tighten mounting bolts. Contact service for bearing replacement. |
| બ્લેડ વર્કપીસમાં જોડાય છે | Dull blade; improper feed rate; workpiece not secured; incorrect blade for material. | Replace or sharpen blade. Reduce feed rate. Secure workpiece firmly. Use appropriate blade type. |
| અચોક્કસ કાપ | Fence or table not properly aligned; loose components. | Check and adjust fence and table alignment. Tighten all adjustable components. |
8. સ્પષ્ટીકરણો
Technical specifications for the Stayer SCE 1650 WMC Miter Saw:
- મોડલ: SCE1650WMC
- શક્તિ: 1600 ડબ્લ્યુ
- ભાગtage: ૨૪૦ વોલ્ટ (એસી)
- નો-લોડ સ્પીડ: 2500 – 4000 RPM (Giri/min)
- બ્લેડ વ્યાસ: Ø 254 મીમી
- બ્લેડ બોર: 30 મીમી
- બ્લેડ સામગ્રી: Tungsten Carbide (Widia TCT Z-52)
- પાવર સ્ત્રોત: કોર્ડેડ ઇલેક્ટ્રિક
- વજન: 16.5 કિગ્રા
- Cutting Capacity (Max):
- 90° (Straight): 155 x 25 mm / 65 x 77 mm
- 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
- 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
- 45° Compound (Miter & Bevel): 75 x 20 mm
9. વોરંટી
STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER webવિગતવાર વોરંટી નિયમો અને શરતો માટે સાઇટ. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.
10. આધાર
For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.
Webસાઇટ: www.stayer.es (માજીampલે, વાસ્તવિક URL બદલાઈ શકે છે)