Philips Lighting ER55LD3WR

ફિલિપ્સ લાઇટિંગ ER55LD3WR LED એક્ઝિટ સાઇન યુઝર મેન્યુઅલ

Model: ER55LD3WR

પરિચય

This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.

સલામતી માહિતી

  • Always disconnect power before installing or servicing the unit.
  • રાષ્ટ્રીય અને સ્થાનિક વિદ્યુત કોડ્સ અનુસાર લાયક ઇલેક્ટ્રિશિયન દ્વારા સ્થાપન કરવું જોઈએ.
  • આ ઉત્પાદનનો ઉપયોગ તેના હેતુવાળા ઉપયોગ સિવાયના હેતુઓ માટે કરશો નહીં.
  • ખાતરી કરો કે બધા જોડાણો સુરક્ષિત અને યોગ્ય રીતે ઇન્સ્યુલેટેડ છે.
  • પાણી અને વધુ પડતા ભેજથી દૂર રહો.

પેકેજ સામગ્રી

ઇન્સ્ટોલેશન શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે:

  • Philips Lighting ER55LD3WR LED Exit Sign unit
  • માઉન્ટ કરવાનું હાર્ડવેર (સ્ક્રૂ, એન્કર)
  • સૂચના માર્ગદર્શિકા (આ દસ્તાવેજ)

સેટઅપ અને ઇન્સ્ટોલેશન

The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.

  1. ઇન્સ્ટોલેશન વિસ્તાર તૈયાર કરો: Disconnect power to the circuit where the exit sign will be installed.
  2. માઉન્ટ કરવાનું:
    • Identify the desired wall mounting location.
    • Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
  3. વાયરિંગ:
    • Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
    • યોગ્ય ગ્રાઉન્ડિંગની ખાતરી કરો.
    • Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
  4. અંતિમ એસેમ્બલી: Secure any covers or diffusers.
Philips Lighting ER55LD3WR LED Exit Sign, front view

આકૃતિ 1: ફ્રન્ટ view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.

ઓપરેટિંગ સૂચનાઓ

Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.

  • સામાન્ય કામગીરી: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
  • ઈમરજન્સી ઓપરેશન: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
  • ટેસ્ટ બટન: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.
Philips Lighting ER55LD3WR LED Exit Sign, test button and indicator lights

આકૃતિ 2: ક્લોઝ-અપ view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.

જાળવણી

Regular maintenance ensures the reliability and longevity of your LED Exit Sign.

  • Monthly Test: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
  • Annual Test: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
  • સફાઈ: એકમના બાહ્ય ભાગને સોફ્ટ સાથે સાફ કરો, ડીamp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
  • બેટરી રિપ્લેસમેન્ટ: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.

મુશ્કેલીનિવારણ

સામાન્ય સમસ્યાઓ અને તેમના ઉકેલો માટે નીચેના કોષ્ટકનો સંદર્ભ લો.

સમસ્યાસંભવિત કારણઉકેલ
Sign does not illuminate (AC power present)No AC power; faulty wiring; LED strip faultCheck circuit breaker; verify wiring connections; contact service for LED replacement.
Sign does not illuminate during power outage (ઇમર્જન્સી મોડ)Battery not connected; discharged battery; faulty battery; charger board faultEnsure battery is connected; allow 24 hours for initial charge; replace battery; contact service for charger board repair.
Red Service Alert indicator is ONIndicates battery, charger board, transformer, or LED strip fault (refer to unit label)Identify specific fault from unit label; perform monthly/annual tests; contact qualified service personnel.
Green Operating Status indicator is OFF (AC power present)No AC power; internal faultCheck AC power supply; contact qualified service personnel.

વિશિષ્ટતાઓ

લક્ષણવિગત
મોડલ નંબરER55LD3WR
બ્રાન્ડફિલિપ્સ લાઇટિંગ
પ્રકાશ સ્ત્રોત પ્રકારએલઇડી
ભાગtage120 વોલ્ટ
પાવર સ્ત્રોતકોર્ડેડ ઇલેક્ટ્રિક
માઉન્ટિંગ પ્રકારવોલ માઉન્ટ
સામગ્રીધાતુ
રંગસફેદ
ઉત્પાદન પરિમાણો4.25 x 6.25 x 4.8 ઇંચ
વસ્તુનું વજન4.98 પાઉન્ડ
યુપીસી781370410117

વોરંટી અને આધાર

For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.

ઉત્પાદક: ફિલિપ્સ લાઇટિંગ

Webસાઇટ: એમેઝોન પર ફિલિપ્સ સ્ટોરની મુલાકાત લો

© 2023 Philips Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.