Apera Instruments Value Series Salt20 Salinity Tester Kit User Manual

પરિચય

This manual provides detailed instructions for the proper use and maintenance of your Apera Instruments Salt20 Salinity Tester Kit. The Salt20 is designed for professional salinity measurement in various water solutions, including pools, spas, agriculture, and environmental monitoring.

For optimal performance and longevity of your device, please read this manual thoroughly before operation.

The Apera Instruments Salt20 Salinity Tester is suitable for a wide range of applications including hydroponics, pools, and drinking water analysis.

સલામતી સાવચેતીઓ

મહત્વપૂર્ણ સલામતી માહિતી

• Always handle the device with care to prevent damage to the sensor.
• Do not immerse the entire meter in water beyond the specified IP67 waterproof rating.
• Keep calibration solutions and the device out of reach of children.
• જ્યારે ઉપયોગમાં ન હોય ત્યારે ઉપકરણને ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
• પાણી પ્રતિકાર જાળવવા માટે બેટરી કમ્પાર્ટમેન્ટ યોગ્ય રીતે સીલ કરેલ છે તેની ખાતરી કરો.

ઉત્પાદન ઓવરview

કિટ ઘટકો

The Salt20 Salinity Tester Kit includes the meter, calibration solution, AAA batteries, and a lanyard, all housed in a portable carrying case.

The Apera Instruments Salt20 Salinity Tester Kit includes:

• Salt20 Salinity Tester
• 1 bottle of calibration solution (12.88 mS/cm, equivalent to 6.44 ppt)
• AAA batteries (pre-installed or included)
• લેનયાર્ડ
• પોર્ટેબલ વહન કેસ

મુખ્ય લક્ષણો

• ઉચ્ચ ચોકસાઈ: Apera's unique platinum black sensor (BPB) ensures high accuracy in a wide-range salinity measurement (0 to 10.0 ppt).
• Easy Auto Calibration: 1-point auto calibration with auto buffer recognition.
• સ્વચાલિત તાપમાન વળતર (ATC): 0-50°C ATC for precise readings.
• એલસીડી ડિસ્પ્લે સાફ કરો: Large LCD with dual display of salinity (ppt) and temperature (°C/°F), including reminders for stable readings and completed calibrations.
• વોટરપ્રૂફ ડિઝાઇન: IP67 water-resistant and floatable for durability.
• લાંબી બેટરી જીવન: Up to 1000 hours of operation powered by AAA batteries.
• સ્વ-નિદાન: With out-of-range and low battery warnings.

સેન્સર ટેકનોલોજી

The Salt20 features Apera's unique Brush-Resistant Platinum Black (BPB) sensor, designed for high accuracy and consistency in wide-range salinity testing.

એલસીડી ડિસ્પ્લે વિગતો

The clear LCD display provides simultaneous readings for salinity (ppt) and temperature, along with indicators for stable readings and successful calibration.

એસેસરીઝ

A lanyard is included for convenient and secure use of the Salt20 Salinity Tester.

The complete test kit comes in a rugged carrying case for protection and portability.

સેટઅપ

બેટરી ઇન્સ્ટોલેશન

The Salt20 Salinity Tester is powered by 4 AAA batteries.

1. Unscrew the battery cap at the top of the meter.
2. Insert the AAA batteries according to the polarity indicators (+/-).
3. Securely screw the battery cap back on to ensure the waterproof seal.

પ્રારંભિક તૈયારી

1. સેન્સરમાંથી રક્ષણાત્મક કેપ દૂર કરો.
2. Rinse the sensor with distilled water and gently shake off excess water.
3. The meter is now ready for calibration or measurement.

ઓપરેટિંગ સૂચનાઓ

મૂળભૂત માપન

1. ચાલુ કરો: Short press the MEAS button to turn on the meter.
2. Immerse Sensor: Dip the sensor into the sample solution, ensuring the solution covers the sensor completely. Stir gently to remove air bubbles.
3. માપ વાંચો: Wait for the smiley face icon to appear and remain stable on the LCD, indicating a stable reading. Record the salinity (ppt) and temperature (°C/°F) values.
4. બંધ કરો: Long press the MEAS button to turn off the meter.

સ્વિચિંગ યુનિટ્સ

To switch between °C and °F, with the meter turned off, long press the CAL button until the unit changes.

સત્તાવાર ઉત્પાદન વિડિઓ

માપાંકન

1-Point Auto Calibration

The Salt20 Salinity Tester uses a 1-point auto calibration process with auto buffer recognition. It is recommended to calibrate the meter regularly for accurate results, especially before critical measurements or if the meter has not been used for a long time.

The Salt20 Salinity Tester features effortless single-button auto calibration with auto buffer recognition, simplifying the calibration process.

1. સોલ્યુશન તૈયાર કરો: Pour a small amount of the 12.88 mS/cm (6.44 ppt) calibration solution into a clean beaker.
2. Enter Calibration Mode: With the meter turned on, short press the CAL button. The display will show "CAL" and the calibration value.
3. Immerse Sensor: Dip the sensor into the calibration solution. Stir gently.
4. Wait for Stability: The meter will automatically recognize the calibration solution. Wait for the smiley face icon to appear and remain stable. The calibration success symbol (M) will also appear.
5. Exit Calibration: Short press the MEAS button to exit calibration mode and return to measurement mode.

નોંધ: Always use fresh calibration solution for each calibration. Do not pour used solution back into the bottle.

જાળવણી

સેન્સર સફાઈ

The BPB (Brush-Resistant Platinum Black) sensor is robust but requires proper cleaning to maintain accuracy.

1. After each use, rinse the sensor thoroughly with distilled or deionized water.
2. If there is visible contamination, gently brush the sensor with a soft brush (like a soft toothbrush) while rinsing.
3. For stubborn deposits, soak the sensor in a mild detergent solution for 10-15 minutes, then rinse thoroughly.
4. ક્યારેય નહીં wipe the sensor with abrasive materials or apply excessive force, as this can damage the platinum black coating.

સંગ્રહ

For long-term storage, ensure the sensor is clean and dry. Replace the protective cap. Store the meter in its carrying case in a cool, dry place.

મુશ્કેલીનિવારણ

સામાન્ય મુદ્દાઓ અને ઉકેલો

વિશિષ્ટતાઓ

ટેકનિકલ વિશિષ્ટતાઓ

વોરંટી અને આધાર

વોરંટી માહિતી

Apera Instruments provides a limited warranty for its products. Please refer to the official Apera Instruments webચોક્કસ વોરંટી નિયમો અને શરતો માટે તમારા ઉત્પાદન સાથે સમાવિષ્ટ સાઇટ અથવા વોરંટી કાર્ડ.

ગ્રાહક આધાર

For technical assistance, troubleshooting, or inquiries about replacement parts and accessories, please contact Apera Instruments customer support.

Webસાઇટ: www.aperainst.com

ઈમેલ: Refer to your product documentation for specific contact email.

ફોન: Refer to your product documentation for specific contact phone number.