iGaging 35-408 Digital Protractor with 10" Rule, 11" - Instruction Manual

ઉત્પાદન ઓવરview

The iGaging 35-408 Digital Protractor with 10" Rule is a precision instrument designed for accurately setting and measuring angles. It features durable stainless steel arms with both inch and metric scales for versatile linear measurements. The integrated digital display provides angle readings in 0.05-degree increments, ensuring high precision for various applications. This tool is equipped with a hold function to retain measurements and a reverse reading capability for convenience in challenging positions. It can measure angles across a full 0 to 360-degree range.

Figure 1: The iGaging 35-408 Digital Protractor, illustrating its primary components including the digital display and the two stainless steel rules.

પેકેજ સામગ્રી

• iGaging 35-408 Digital Protractor with 10" Rule
• Protective Plastic Pouch
• વધારાની બેટરી

Figure 2: The iGaging Digital Protractor as packaged, including the protective plastic pouch.

સેટઅપ

1. અનપેકીંગ: Carefully remove the digital protractor from its protective plastic pouch.
2. બેટરી ઇન્સ્ટોલેશન: The device comes with a pre-installed battery. An extra battery is provided for future replacement. To replace the battery, locate the battery compartment on the digital display unit, open it, insert the new battery with the correct polarity, and close the compartment securely.
3. પ્રારંભિક પાવર ચાલુ: Press the "ON/OFF" button to power on the device. The digital display should illuminate and show a reading.

ઓપરેટિંગ સૂચનાઓ

Basic Angle Measurement

1. પાવર ચાલુ: દબાવો ચાલુ/બંધ button to turn on the protractor.
2. Zeroing the Display: To set the current position as the zero reference, press the શૂન્ય button. This is useful for measuring relative angles.
3. હથિયારોની સ્થિતિ: Place the protractor's arms against the surfaces of the angle you wish to measure. Ensure both arms are flush with the surfaces for an accurate reading.
4. Reading the Angle: The angle will be displayed instantly on the large LCD screen in 0.05-degree increments.

Figure 3: Demonstrating the use of the digital protractor to measure an angle on a workpiece.

હોલ્ડ ફંક્શનનો ઉપયોગ કરવો

• After obtaining a measurement, press the HOLD/Rev. button once to freeze the reading on the display. The "HOLD" indicator will appear.
• To release the hold and resume live measurement, press the HOLD/Rev. ફરીથી બટન.

Reverse Reading Capability

• આ HOLD/Rev. button also functions as a reverse reading toggle. Press and hold this button to invert the display reading, which can be useful when the protractor is in an inverted position.

Linear Measurement

• The stainless steel arms are graduated with both inch and metric scales, allowing for direct linear measurements up to 10 inches or 25 cm.

Figure 4: The protractor used as a linear measuring rule, showcasinતેની બેવડી કાર્યક્ષમતા.

જાળવણી

• સફાઈ: Wipe the protractor with a soft, dry cloth after each use to remove dust and debris. Avoid using abrasive cleaners or solvents.
• સંગ્રહ: Store the protractor in its protective plastic pouch when not in use to prevent scratches and damage. Keep it in a dry environment.
• બેટરી રિપ્લેસમેન્ટ: If the display becomes dim or unresponsive, replace the battery. Refer to the "Setup" section for battery replacement instructions.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

• મોડલ: 35-408
• બ્રાન્ડ: આઇગેજિંગ
• માપન શ્રેણી: 0 થી 360 ડિગ્રી
• ચોકસાઈ: 0.05 ડિગ્રી વધારો
• Rule Length: 10 ઇંચ (25 સે.મી.)
• સામગ્રી: સ્ટેનલેસ સ્ટીલ
• વિશેષતાઓ: Large LCD display, Hold function, Reverse reading capability, Inch and Metric scales
• પાવર સ્ત્રોત: Button cell battery (extra battery included)
• પરિમાણો: આશરે 12.4 x 2.9 x 0.6 ઇંચ (પેકેજ્ડ)
• વજન: Approximately 0.01 ounces (packaged)

વોરંટી અને આધાર

For warranty information or technical support, please contact iGaging directly. Refer to the product packaging or the official iGaging webસૌથી અદ્યતન સંપર્ક વિગતો અને વોરંટી શરતો માટે સાઇટ.

ઉત્પાદક: આઇગેજિંગ

પ્રથમ ઉપલબ્ધ: સપ્ટેમ્બર 21, 2009