PeakTech P 2800A Professional Laser Distance Meter User Manual

1. પરિચય

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. સલામતી સૂચનાઓ

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• લેસર સલામતી: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• બેટરી સલામતી: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• સંચાલન પર્યાવરણ: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• જાળવણી: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• PeakTech P 2800A Laser Distance Meter
• બેલ્ટ પાઉચ
• 2 x 1.5V AAA આલ્કલાઇન બેટરીઓ
• વપરાશકર્તા માર્ગદર્શિકા (જર્મન અને અંગ્રેજી)
• માપાંકન પુષ્ટિ

4. ઉપકરણ ઓવરview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

આકૃતિ 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

આકૃતિ 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

આકૃતિ 3: ક્લોઝ-અપ view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

આકૃતિ 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• એકમ: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Reference Point Button: Changes the measurement reference point (front, rear, flip-out stop).
• મેમરી બટન: Accesses stored measurements.
• બેકલાઇટ બટન: ડિસ્પ્લે બેકલાઇટને ટૉગલ કરે છે.
• એલસીડી ડિસ્પ્લે: Multi-line display showing current measurements, previous results, and function icons.

5. સેટઅપ

5.1 બેટરી ઇન્સ્ટોલેશન

1. ઉપકરણના પાછળના ભાગમાં બેટરી કમ્પાર્ટમેન્ટ કવર શોધો.
2. કમ્પાર્ટમેન્ટ ખોલવા માટે કવર સ્લાઇડ કરો અથવા અનક્લિપ કરો.
3. Insert two 1.5V AAA alkaline batteries, ensuring correct polarity (+/-).
4. બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.

The device will automatically power on or can be powered on by pressing the MEAS બટન

6. ઓપરેટિંગ સૂચનાઓ

6.1 પાવર ચાલુ/બંધ

• પાવર ચાલુ: દબાવો MEAS બટન
• પાવર બંધ: દબાવો અને પકડી રાખો બંધ/સાફ button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 માપન એકમો બદલવું

દબાવો UNIT button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the સંદર્ભ બિંદુ button to switch between these options. The current reference point is indicated on the display.

6.4 Single Distance Measurement

1. લેસરને લક્ષ્ય પર રાખો.
2. દબાવો MEAS લેસર સક્રિય કરવા માટે એકવાર બટન દબાવો.
3. દબાવો MEAS button again to take the measurement. The result will be displayed.

6.5 Continuous Measurement (Min/Max)

1. દબાવો અને પકડી રાખો MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. દબાવો MEAS again to stop continuous measurement.

6.6 વિસ્તાર માપન

1. દબાવો વિસ્તાર/વોલ્યુમ button once to enter area measurement mode. An icon for area will appear on the display.
2. દબાવીને પહેલી બાજુ (દા.ત., લંબાઈ) માપો MEAS.
3. બીજી બાજુ (દા.ત., પહોળાઈ) દબાવીને માપો MEAS.
4. The calculated area will be displayed.

6.7 વોલ્યુમ માપન

1. દબાવો વિસ્તાર/વોલ્યુમ button twice to enter volume measurement mode. An icon for volume will appear.
2. Measure the length by pressing MEAS.
3. Measure the width by pressing MEAS.
4. Measure the height by pressing MEAS.
5. The calculated volume will be displayed.

6.8 Pythagorean Measurement (Indirect Measurement)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. દબાવો પાયથાગોરિયન button to select the desired indirect measurement mode.
2. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
3. The device will calculate and display the unknown height or distance.

6.9 Addition and Subtraction

After taking a measurement, you can add or subtract subsequent measurements:

1. એક માપ લો.
2. દબાવો + button for addition or - button for subtraction.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. જરૂર મુજબ પુનરાવર્તન કરો.

6.10 મેમરી કાર્ય

The device can store up to 99 measurement values.

• સ્ટોર: Measurements are automatically stored.
• યાદ કરો: દબાવો સ્મૃતિ માટે બટન view stored values. Use the + અને - buttons to scroll through the memory.
• સાફ મેમરી: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. જાળવણી

• સફાઈ: સોફ્ટનો ઉપયોગ કરો, ડીamp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• સંગ્રહ: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• બેટરી રિપ્લેસમેન્ટ: ડિસ્પ્લે પર ઓછી બેટરી સૂચક દેખાય ત્યારે બેટરી બદલો.

8. મુશ્કેલીનિવારણ

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech webસાઇટ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો.