Revell Control 23858 GO! Video Quadcopter Instruction Manual

પરિચય

This manual provides essential instructions for the safe and effective use of your Revell Control 23858 GO! Video Quadcopter. Please read this manual thoroughly before operating the device and retain it for future reference.

Image: The Revell Control 23858 GO! Video Quadcopter, a white drone with red accents and propeller guards.

સલામતી માહિતી

Always operate the quadcopter responsibly and safely. Failure to follow these guidelines may result in injury or damage to the product or property.

• Keep hands, face, and loose clothing away from rotating propellers.
• લોકો, પ્રાણીઓ કે અવરોધોની નજીક ઉડશો નહીં.
• ભારે પવન અથવા પ્રતિકૂળ હવામાન પરિસ્થિતિઓમાં ઉડવાનું ટાળો.
• ખાતરી કરો કે દરેક ફ્લાઇટ પહેલા બેટરી સંપૂર્ણપણે ચાર્જ થઈ ગઈ છે.
• Supervise children during operation. Recommended age range is 12 to 18 years.
• Do not modify the quadcopter or its components.
• Use only original Revell Control spare parts and accessories.

પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• Quadcopter with detachable camera
• 4CH-2.4 GHz Remote Control
• Replaceable 3.7 V LiPo Battery (380 mAh)
• પ્રોપેલર ગાર્ડ્સ
• Mountable Landing Skids
• યુએસબી ચાર્જર
• Replacement Rotor Set
• સૂચના માર્ગદર્શિકા (આ દસ્તાવેજ)

Image: All components of the Revell Control 23858 GO! Video Quadcopter package, including the drone, remote, battery, charger, and spare parts.

સેટઅપ

1. બેટરી ચાર્જિંગ

The quadcopter is powered by a rechargeable 3.7V LiPo battery. Before first use, fully charge the battery.

1. Connect the LiPo battery to the included USB charger.
2. USB ચાર્જરને સુસંગત USB પાવર સ્ત્રોત (દા.ત., કમ્પ્યુટર USB પોર્ટ, USB વોલ એડેપ્ટર) માં પ્લગ કરો.
3. ચાર્જર પરનો સૂચક પ્રકાશ ચાર્જિંગ સ્થિતિ બતાવશે (દા.ત., ચાર્જિંગ માટે લાલ, સંપૂર્ણ ચાર્જ માટે લીલો).
4. Charging time is approximately 60-90 minutes. Do not overcharge.
5. Disconnect the battery once charging is complete.

Image: The 3.7V LiPo battery for the quadcopter.

2. Quadcopter Battery Installation

1. Ensure the quadcopter's power switch is in the OFF position.
2. Locate the battery compartment on the underside of the quadcopter.
3. ચાર્જ કરેલી LiPo બેટરી કાળજીપૂર્વક ડબ્બામાં દાખલ કરો.
4. Connect the battery's plug to the quadcopter's power port.
5. બેટરીના ડબ્બાને સુરક્ષિત રીતે બંધ કરો.

3. રીમોટ કંટ્રોલ બેટરી ઇન્સ્ટોલેશન

The remote control requires 4x 1.5V AA batteries (not included).

1. રિમોટ કંટ્રોલની પાછળનો બેટરીનો ડબ્બો ખોલો.
2. Insert 4 new 1.5V AA batteries, observing the correct polarity (+/-).
3. બેટરી કમ્પાર્ટમેન્ટ કવર બંધ કરો.

Image: The 4-channel 2.4 GHz remote control for the quadcopter.

4. Propeller Guard and Landing Skid Installation

Attach the propeller guards and landing skids for added protection during flight and landing.

1. Carefully snap the propeller guards onto the arms of the quadcopter, ensuring they are securely fastened around each propeller.
2. Attach the landing skids to the designated slots on the underside of the quadcopter.

5. Camera Attachment (if detached)

If the camera is not pre-attached, carefully slide it into the designated slot on the underside of the quadcopter and connect its cable.

નોંધ: For video and photo recording, a Micro SD card (not included) must be inserted into the camera's slot.

ઓપરેટિંગ સૂચનાઓ

1. Pairing the Quadcopter and Remote Control

1. Place the quadcopter on a flat, level surface.
2. Turn on the quadcopter's power switch. The indicator lights will flash.
3. રિમોટ કંટ્રોલ ચાલુ કરો.
4. Push the left joystick (throttle) all the way up, then all the way down. The quadcopter's lights will stop flashing and remain solid, indicating successful pairing.

૩. પ્રી-ફ્લાઇટ ચેક્સ

• Ensure both quadcopter and remote control batteries are fully charged.
• Check that all propellers are securely attached and undamaged.
• Verify that propeller guards and landing skids are properly installed.
• Ensure the flight area is clear of obstacles, people, and animals.
• Avoid flying in windy conditions.

3. મૂળભૂત ફ્લાઇટ નિયંત્રણો

The 4-channel 2.4 GHz remote control allows for precise flight maneuvers.

• ડાબી જોયસ્ટિક (થ્રોટલ/યો):
  • Push up/down: Increase/decrease altitude (Throttle).
  • Push left/right: Rotate quadcopter left/right (Yaw).
• જમણી જોયસ્ટિક (પિચ/રોલ):
  • Push up/down: Move quadcopter forward/backward (Pitch).
  • Push left/right: Move quadcopter left/right (Roll).
• ટ્રિમ બટનો: Use these to fine-tune the quadcopter's stability if it drifts in any direction during hover.

Image: The quadcopter being held in a hand, illustrating its size and portability.

4. અદ્યતન ફ્લાઇટ કાર્યો

• ઝડપ સ્તરો: The quadcopter offers multiple speed settings (convenient to fast). Refer to the remote control diagram for the specific button to cycle through speed modes.
• હેડલેસ મોડ: This mode simplifies flight by orienting the quadcopter relative to the pilot, regardless of the drone's actual front direction. Activate via the designated button on the remote.
• Flip Function: Perform aerial stunts with the flip button. Ensure sufficient altitude and clear space before attempting.

5. Video and Photo Recording

The integrated camera allows for capturing videos and photos.

1. Ensure a Micro SD card is inserted into the camera.
2. Power on the quadcopter and remote control.
3. Refer to the remote control diagram for the specific buttons to start/stop video recording and take photos.
4. Video resolution is 1080p, and effective still resolution is 0.3 MP.
5. Files are saved in MP4 format on the Micro SD card.
6. To access recordings, remove the Micro SD card and insert it into a computer or card reader.

જાળવણી

• સફાઈ: Use a soft, dry cloth to clean the quadcopter and remote control. Do not use solvents or harsh chemicals.
• પ્રોપેલર રિપ્લેસમેન્ટ: If a propeller is damaged, replace it with a new one from the included replacement rotor set. Ensure the correct propeller (A or B) is installed on the corresponding motor.
• બેટરી સંભાળ:
  • Do not puncture, disassemble, or expose the battery to extreme temperatures.
  • જ્યારે ઉપયોગમાં ન હોય ત્યારે બેટરીને ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
  • If the quadcopter will not be used for an extended period, remove the battery from both the quadcopter and the remote control.
• સંગ્રહ: Store the quadcopter and its components in a safe, dry place, away from direct sunlight and extreme temperatures.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

વોરંટી માહિતી

Specific warranty details for the Revell Control 23858 GO! Video Quadcopter are not provided in this manual. Please refer to the warranty card included with your product or contact Revell Control customer service for detailed information regarding warranty coverage and terms.

ગ્રાહક આધાર

If you encounter any issues or have questions not covered in this manual, please contact Revell Control customer support or your retailer for assistance. Keep your purchase receipt and product model number (23858) ready when contacting support.