Airam LED Cabinet Lamp 1.2W સૂચના માર્ગદર્શિકા

1. પરિચય

This manual provides essential instructions for the safe and efficient use of your Airam LED Cabinet Lamp 1.2W. This battery-operated lamp features a PIR motion sensor, automatically illuminating when motion is detected, making it ideal for cabinets, drawers, and other enclosed spaces. Please read this manual thoroughly before installation and operation.

2. સેટઅપ

2.1 પેકેજ સામગ્રી

આગળ વધતા પહેલા, ખાતરી કરો કે બધા ઘટકો હાજર છે:

• Airam LED Cabinet Lamp 1.2W
• Mounting hardware (screws or adhesive strips, typically included in packaging)

Figure 1: Airam LED Cabinet Lamp in its retail packaging, showing the lamp and typical mounting accessories.

2.2 બેટરી ઇન્સ્ટોલેશન

The Airam LED Cabinet Lamp requires 4 x AA 1.5V batteries (not included).

1. Locate the battery compartment cover on the back or side of the lamp.
2. કમ્પાર્ટમેન્ટ ખોલવા માટે કવર સ્લાઇડ કરો અથવા અનક્લિપ કરો.
3. Insert 4 AA batteries, ensuring correct polarity (+ and - terminals match the markings inside the compartment).
4. બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.

2.3 Mounting the Lamp

એલamp can be mounted using screws or adhesive strips, depending on the included hardware and your preference. Choose a location where the motion sensor has a clear line of sight to the area where movement is expected (e.g., inside a cabinet door, above a drawer).

આકૃતિ 2: ફ્રન્ટ view of the Airam LED Cabinet Lamp, highlighting the central motion sensor.

Using Screws (if applicable):

1. Mark the desired mounting position.
2. Drill pilot holes if necessary, matching the lamp's mounting holes.
3. એલ સુરક્ષિત કરોamp પ્રદાન કરેલ સ્ક્રૂનો ઉપયોગ કરીને.

Using Adhesive Strips (if applicable):

1. Clean the mounting surface thoroughly to ensure it is dry and free of dust or grease.
2. Peel the protective backing from the adhesive strips.
3. Firmly press the lamp onto the desired surface for at least 30 seconds.

3. ઓપરેશન

The Airam LED Cabinet Lamp is designed for automatic operation using its integrated PIR (Passive Infrared) motion sensor.

1. Once batteries are installed and the lamp is mounted, it will enter standby mode.
2. When the PIR motion sensor detects movement within its range (e.g., opening a cabinet door or drawer), the LED lights will automatically turn on.
3. એલamp will remain illuminated for approximately 25 seconds after motion is detected.
4. If no further motion is detected within this period, the lamp will automatically turn off to conserve battery power.
5. If continuous motion is detected, the lamp will remain on until motion ceases for 25 seconds.

નોંધ: Ensure the motion sensor is not obstructed for optimal performance.

4. જાળવણી

4.1 બેટરી રિપ્લેસમેન્ટ

When the light output diminishes or the lamp stops functioning, it is time to replace the batteries. Refer to section 2.2 બેટરી ઇન્સ્ટોલેશન વિગતવાર સૂચનાઓ માટે.

• Always replace all 4 AA batteries at the same time.
• જૂની અને નવી બેટરીઓ અથવા વિવિધ પ્રકારની બેટરીઓનું મિશ્રણ કરશો નહીં.
• વપરાયેલી બેટરીનો સ્થાનિક નિયમો અનુસાર જવાબદારીપૂર્વક નિકાલ કરો.

4.2 સફાઈ

એલamp is constructed from polycarbonate and ABS plastic. To clean the lamp:

• સપાટીને નરમ, સૂકા અથવા સહેજ ડીથી સાફ કરોamp કાપડ
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish or the sensor.
• Ensure no liquid enters the battery compartment or sensor area.

5. મુશ્કેલીનિવારણ

6. સ્પષ્ટીકરણો

7. વોરંટી અને સપોર્ટ

Specific warranty information may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for details regarding warranty coverage.

For technical support or further assistance, please contact the manufacturer, Bot Lighting, or your retailer. Keep your purchase receipt as proof of purchase.