CONTEC CMS50NA

CONTEC CMS50NA પલ્સ ઓક્સિમીટર વપરાશકર્તા માર્ગદર્શિકા

Model: CMS50NA | Brand: CONTEC

1. પરિચય

The CONTEC CMS50NA Pulse Oximeter is a portable device designed for non-invasive spot-check measurement of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is intended for sports and aviation use only and is not a medical device. This manual provides essential information for the safe and effective operation of the device.

મહત્વપૂર્ણ નોંધ: This product is intended for sports and aviation use only. It is not a medical device and should not be used for diagnosis or treatment of any medical condition.

2. શું શામેલ છે

પેકેજ ખોલતી વખતે, કૃપા કરીને ચકાસો કે બધા ઘટકો હાજર છે:

  • CONTEC CMS50NA Pulse Oximeter (1 unit)
  • Handy Carry Pouch (1 unit)
  • 1.5V AAA Alkaline Batteries (2 units)
  • Long Lanyard (Neck/Wrist Cord) (1 unit)
  • વપરાશકર્તા માર્ગદર્શિકા (1 એકમ)
Contents of CONTEC CMS50NA Pulse Oximeter package

Image: All items included in the CONTEC CMS50NA Pulse Oximeter package, including the oximeter, carry pouch, batteries, lanyard, and user manual.

3. સેટઅપ

3.1 બેટરી ઇન્સ્ટોલેશન

  1. Open the battery cover on the back of the device by sliding it downwards.
  2. Insert two 1.5V AAA alkaline batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
  3. બેટરી કવરને ફરીથી સ્થાને સ્લાઇડ કરીને બંધ કરો જ્યાં સુધી તે સુરક્ષિત રીતે ક્લિક ન કરે.
Battery compartment of CONTEC CMS50NA Pulse Oximeter

Image: The open battery compartment of the pulse oximeter, showing where to insert the two AAA batteries.

૪.૨ ડોર જોડવું

  1. Thread the thinner end of the lanyard through the lanyard loop hole located on the side of the oximeter.
  2. Pass the thicker end of the lanyard through the looped thinner end and pull gently to secure.
Steps to attach lanyard to CONTEC CMS50NA Pulse Oximeter

Image: A visual guide demonstrating the three steps to correctly attach the neck/wrist lanyard to the pulse oximeter.

4. ઓપરેટિંગ સૂચનાઓ

4.1 એક માપન લેવું

  1. પલ્સ ઓક્સિમીટરની ક્લિપ ખોલો.
  2. Insert one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring it is placed correctly.
  3. Press the power button on the top of the device.
  4. Keep your hand still and avoid shaking during the measurement process.
  5. The SpO2 and Pulse Rate values will appear on the display within a few seconds.
Steps for taking a measurement with CONTEC CMS50NA Pulse Oximeter

Image: A three-step visual guide showing how to open the clip, insert a finger, and press the power button to take a measurement.

4.2 ડિસ્પ્લેને સમજવું

The bright TFT display shows the following information:

  • SpO2: Blood Oxygen Saturation Level (displayed as a percentagઇ).
  • પીઆરબીપીએમ: Pulse Rate (displayed in beats per minute).
  • Pulse Rate Waveform: તમારા ધબકારાની ગ્રાફિકલ રજૂઆત.
  • પલ્સ બાર ગ્રાફ: A vertical bar graph indicating pulse intensity.
  • બેટરી સૂચક: બાકીની બેટરી જીવન દર્શાવે છે.
CONTEC CMS50NA Pulse Oximeter display features

Image: The pulse oximeter display showing SpO2 and PRbpm readings, along with the pulse waveform and bar graph.

4.3 Display Orientation

The device features a rotatable multi-directional display. The display orientation automatically adjusts based on how the device is held, ensuring easy readability from various angles.

Rotatable display of CONTEC CMS50NA Pulse Oximeter

Image: The pulse oximeter display shown in different orientations, demonstrating its rotatable feature for easy viewing

4.4 આપોઆપ પાવર બંધ

The device will automatically power off after 5 seconds of inactivity or when the finger is removed from the sensor.

5. જાળવણી

5.1 ઉપકરણની સફાઈ

  • Clean the surface of the oximeter with a soft cloth damp70% આઇસોપ્રોપિલ આલ્કોહોલ સાથે એન્ડેડ.
  • ઉપકરણને પાણી કે કોઈપણ સફાઈ દ્રાવણમાં બોળશો નહીં.
  • Ensure the device is completely dry before reuse.

5.2 બેટરી રિપ્લેસમેન્ટ

Replace batteries when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.

5.3 સંગ્રહ

Store the pulse oximeter in its handy carry pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

6. મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણઉકેલ
પાવર ચાલુ થયા પછી કોઈ પ્રદર્શન નથી.બેટરીઓ મૃત અથવા ખોટી રીતે ઇન્સ્ટોલ કરેલી છે.Replace batteries or re-install them correctly, ensuring polarity.
SpO2 and PR values are unstable.Finger not inserted properly, patient movement, or cold hands.Re-insert finger, remain still, or warm hands before measurement. Ensure no nail polish.
"Finger Out" message displayed.Finger not detected or removed.Ensure finger is fully inserted into the sensor.
પ્રદર્શન મંદ છે.Low battery or screen protective film still on.Replace batteries. Remove the thin protective film from the screen.

7. સ્પષ્ટીકરણો

  • મોડલ નામ: CMS50NA
  • ઉત્પાદન પરિમાણો: 2.24 x 1.34 x 1.22 ઇંચ
  • વજન: 3.21 ઔંસ (બેટરી સાથે)
  • પાવર આવશ્યકતાઓ: 2 x 1.5V AAA આલ્કલાઇન બેટરી
  • બેટરી જીવન: Approximately 20-30 hours of continuous operation
  • ડિસ્પ્લે પ્રકાર: TFT ડિસ્પ્લે
  • SpO2 માપન શ્રેણી: ૧૦% - ૧૦૦%
  • પલ્સ રેટ માપવાની રેંજ: 30 bpm - 250 bpm
  • સ્વચાલિત પાવર બંધ: નિષ્ક્રિયતાના 5 સેકંડ પછી
  • ઉત્પાદક: કોન્ટેક મેડિકલ સિસ્ટમ્સ કો., લિ.

8. વોરંટી અને સપોર્ટ

For warranty information and customer support, please refer to the official CONTEC webસાઇટ પર જાઓ અથવા તમારા રિટેલરનો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

કાનૂની અસ્વીકરણ: This product is intended for sports and aviation use only. We are the direct manufacturer, there is a clear screen protector which can be removed before use.

For additional resources, you may refer to the સત્તાવાર વપરાશકર્તા માર્ગદર્શિકા (PDF).

૧૦. સત્તાવાર ઉત્પાદન વિડિઓઝ

How to take measurements with CONTEC50NA pulse oximeter?

Video: An official demonstration by Contec Medical Systems Co., Ltd. showing the correct procedure for taking measurements with the CMS50NA pulse oximeter.

© 2025 CONTEC. બધા હકો અમારી પાસે રાખેલા છે.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.