પરિચય
The Cooler Master Hyper 212 LED CPU Cooler is designed to provide efficient cooling for your desktop processor. Featuring a 120mm XtraFlo 'Fire Red' LED PWM fan and four direct contact copper heat pipes, this cooler offers a balanced performance between cooling efficiency and low noise operation. Its universal mounting system ensures compatibility with a wide range of Intel sockets.
Please read this manual carefully before installation and use to ensure proper setup and optimal performance.
પેકેજ સામગ્રી
ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:
- 1 x Cooler Master Hyper 212 LED CPU Cooler Unit
- 1 x Mounting Kit (for Intel sockets)
- 1 x Thermal Grease Pack
- 1 x વપરાશકર્તા માર્ગદર્શિકા
Image: Illustrative view of the Cooler Master Hyper 212 LED CPU Cooler and its main components.
સેટઅપ અને ઇન્સ્ટોલેશન
This cooler is compatible with Intel sockets: LGA 2066, 2011-v3, 2011, 1156, 1155, 1151, 1150, 1366, and 775. The installation process involves securing the backplate, applying thermal paste, mounting the heatsink, and attaching the fan.
- મધરબોર્ડ તૈયાર કરો: Ensure your motherboard is removed from the PC case if necessary for backplate installation. Identify the correct mounting holes for your Intel socket type.
- બેકપ્લેટ ઇન્સ્ટોલ કરો: Attach the universal Intel backplate to the rear of your motherboard, aligning the screws with the appropriate holes.
- થર્મલ પેસ્ટ લાગુ કરો: Clean the CPU surface and apply a small amount of thermal grease (included) to the center of the CPU. Spread it evenly or allow the cooler's pressure to distribute it.
- Mount Heatsink: Carefully place the heatsink onto the CPU, ensuring the direct contact heat pipes make full contact. Secure the heatsink using the provided mounting brackets and screws, tightening them in a diagonal pattern until snug. Do not overtighten.
- Attach Fan: Use the quick-snap fan brackets to attach the 120mm XtraFlo fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of your PC case.
- ફેન કેબલ કનેક્ટ કરો: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard.
છબી: બાજુ view of the cooler, showing the copper heat pipes extending from the base through the aluminum fins.
ઓપરેટિંગ સૂચનાઓ
The Cooler Master Hyper 212 LED CPU Cooler operates automatically once connected to the motherboard's CPU_FAN header. The 4-pin PWM fan allows your motherboard to dynamically control the fan speed based on CPU temperature, optimizing for both cooling performance and noise levels.
- ઓટોમેટિક સ્પીડ કંટ્રોલ: The fan speed will adjust between 600 and 1600 RPM (±10%) depending on the CPU load and temperature.
- એલઇડી રોશની: The 'Fire Red' LEDs on the fan will illuminate when the fan is operating, providing aesthetic lighting inside your PC case.
- BIOS/UEFI સેટિંગ્સ: You can fine-tune fan control settings through your motherboard's BIOS/UEFI interface for custom performance profiles, if desired.
Image: The Cooler Master Hyper 212 LED CPU Cooler with its 'Fire Red' LED fan glowing.
જાળવણી
Regular maintenance ensures optimal cooling performance and extends the lifespan of your CPU cooler.
- ધૂળ દૂર કરવી: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fan is powered off before cleaning.
- Fan Cleaning/Replacement: The quick-snap fan bracket allows for easy removal of the fan for thorough cleaning or replacement if needed. Gently unclip the fan from the heatsink, clean, and reattach.
- થર્મલ પેસ્ટ: If you remove the heatsink for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler base and apply a fresh layer before reinstallation.
છબી: આગળ view of the 120mm XtraFlo fan, showing its blade design.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ઉચ્ચ CPU તાપમાન |
|
|
| અતિશય ચાહક અવાજ |
|
|
| Cooler Does Not Fit in Case |
વિશિષ્ટતાઓ
| લક્ષણ | વિગત |
|---|---|
| ઉત્પાદન મોડલ | RR-212L-16PR-R1 |
| સુસંગત સોકેટ્સ | Intel LGA 2066 / 2011-v3 / 2011 / 1156 / 1155 / 1151 / 1150 / 1366 / 775 |
| એકંદર પરિમાણો (L x W x H) | 120 x 84 x 160 mm (4.7 x 3.3 x 6.3 ઇંચ) |
| કુલ વજન | 705 ગ્રામ (1.55 lbs) |
| Heatsink Dimensions (L x W x H) | 116 x 60 x 160 mm (4.6 x 2.4 x 6.3 ઇંચ) |
| Heatsink Material | 4 Direct Contact Copper Heat Pipes, Aluminum Fins |
| Heat Pipe Dimensions | Ø6 મીમી |
| Fan Dimensions (L x W x H) | 120 x 120 x 25 મીમી (4.7 x 4.7 x 1 ઇંચ) |
| ચાહક ઝડપ | 600 - 1600 RPM (PWM) ±10% |
| ચાહક એરફ્લો | 66.3 CFM ±10% (@ 1600RPM) |
| ચાહક હવાનું દબાણ | 1.7 mm H2O ±10% (@ 1600RPM) |
| ચાહક જીવન અપેક્ષા | 40,000 કલાક |
| પંખાના અવાજનું સ્તર | 9 - 31 dB |
| બેરિંગ પ્રકાર | રાઇફલ બેરિંગ |
| પાવર કનેક્ટર | 4-Pin PWM |
| ફેન રેટેડ વોલ્યુમtage | 12 વીડીસી |
| રેટ કરેલ વર્તમાન | 0.19 એ |
| પાવર વપરાશ | 2.28 ડબ્લ્યુ |
છબી: ઉપરથી નીચે સુધી view of the heatsink, showing the aluminum fins and the ends of the copper heat pipes.
વોરંટી અને આધાર
વોરંટી માહિતી અને ટેકનિકલ સપોર્ટ માટે, કૃપા કરીને સત્તાવાર કુલર માસ્ટરનો સંદર્ભ લો. webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.
કુલર માસ્ટર ઓફિશિયલ Webસાઇટ: www.coolemaster.com