BINGFU BFN00213

BINGFU Dual Band WiFi 2.4GHz/5GHz/5.8GHz 9dBi Magnetic Base RP-SMA Male Antenna

Model: BFN00213

પરિચય

This manual provides comprehensive instructions for the BINGFU Dual Band WiFi 2.4GHz/5GHz/5.8GHz 9dBi Magnetic Base RP-SMA Male Antenna. This antenna is designed to enhance wireless connectivity for various devices, including WiFi routers, wireless network cards, USB adapters, and security IP cameras. Please read this manual carefully before installation and operation to ensure proper use and optimal performance.

સેટઅપ સૂચનાઓ

Follow these steps to properly set up your antenna:

  1. Identify the Connector Type: Ensure your device has an RP-SMA Female connector. The BINGFU antenna features an RP-SMA Male connector, which has a central hole and no pin. This is distinct from an SMA Male connector, which has a central pin. Confirm compatibility before proceeding.
  2. એન્ટેના કનેક્ટ કરો: Carefully screw the RP-SMA Male connector of the antenna onto the corresponding RP-SMA Female port on your device (e.g., WiFi router, network card, USB adapter, or IP camera). Hand-tighten until secure, but do not overtighten.
  3. Position the Magnetic Base: Place the magnetic base of the antenna on a suitable metallic surface for stability and optimal signal reception. The 3-meter (10-foot) RG174 coaxial cable allows for flexible placement.
Comparison of RP-SMA Male and SMA Male connectors
Image: Comparison of RP-SMA Male (left, no pin) and SMA Male (right, with pin) connectors. Ensure your device matches the RP-SMA Male antenna.
Antenna connected to a camera or router interface
Image: Illustration of the antenna connecting to a camera or router interface. The antenna's RP-SMA Male connector is shown attaching to the device's port.
Antenna connected to a WiFi USB adapter interface
Image: Illustration of the antenna connecting to a WiFi USB adapter interface. The antenna's RP-SMA Male connector is shown attaching to the adapter's port.
Magnetic base mounting of the antenna
Image: Depiction of the magnetic base mounting feature. The antenna can be securely placed on metallic surfaces.

ઓપરેટિંગ સૂચનાઓ

The BINGFU antenna is designed for straightforward operation once connected:

  • ડ્યુઅલ બેન્ડ કાર્યક્ષમતા: This antenna supports both 2.4GHz and 5GHz/5.8GHz WiFi bands. Your connected device will automatically utilize the appropriate frequency based on its configuration and network availability.
  • Omni-directional Coverage: The antenna provides omni-directional signal coverage, meaning it transmits and receives signals in all horizontal directions. This simplifies placement as precise aiming is not required.
  • શ્રેષ્ઠ પ્લેસમેન્ટ: For best performance, position the antenna in an open area, away from large metal objects, thick walls, or other obstructions that could interfere with wireless signals. Experiment with different locations to find the best signal strength for your application.
Antenna illustrating 2.4GHz and 5.8GHz WiFi bands
Image: The antenna highlighting its support for 2.4GHz and 5.8GHz WiFi bands, indicating its dual-band capability.

જાળવણી

To ensure the longevity and consistent performance of your BINGFU antenna, follow these simple maintenance guidelines:

  • સફાઈ: Periodically wipe the antenna and its magnetic base with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
  • શારીરિક તપાસ: Regularly check the antenna and cable for any signs of damage, such as bends, cuts, or loose connections. Address any issues promptly.
  • પર્યાવરણીય પરિસ્થિતિઓ: While designed for durability, avoid exposing the antenna to extreme temperatures or prolonged direct sunlight beyond its specified operating and storage ranges.

મુશ્કેલીનિવારણ

If you encounter issues with your BINGFU antenna, consider the following troubleshooting steps:

  • No Signal or Poor Signal:
    • Verify that the antenna is securely connected to your device's RP-SMA Female port.
    • Reposition the antenna to a different location, ideally higher and away from obstructions, to improve signal reception.
    • Ensure your device's wireless settings are correctly configured for the 2.4GHz or 5GHz/5.8GHz band.
  • Antenna Does Not Fit:
    • Confirm that your device requires an RP-SMA Male antenna. This antenna is not compatible with SMA Male or other connector types. Refer to your device's manual for its specific antenna connector requirements.
  • તૂટક તૂટક જોડાણ:
    • Check for potential sources of interference, such as other electronic devices, microwaves, or cordless phones operating on similar frequencies.
    • ખાતરી કરો કે કેબલ ક્ષતિગ્રસ્ત કે વાંકી ન હોય.

ઉત્પાદન સ્પષ્ટીકરણો

મોડલ નંબરBFN00213
ગેઇન9dBi
આવર્તન શ્રેણીDual Band WiFi 2.4GHz (2400 - 2485 MHz), 5GHz/5.8GHz (5150 - 5850 MHz)
દિશાઑમ્ની દિશા
એન્ટેના કનેક્ટરઆરપી-એસએમએ પુરુષ કનેક્ટર
કેબલ પ્રકારRG174 કોક્સિયલ કેબલ
કેબલ લંબાઈ3 મીટર (10 ફૂટ)
લક્ષણMagnetic Base Mounting
અવબાધ50 ઓહ્મ
VSWR< 2.0
ધ્રુવીકરણરેખીય ertભી
ચોખ્ખું વજન62g (per antenna)
ઓપરેટિંગ તાપમાન-20°C ~ +80°C
સંગ્રહ તાપમાન-30°C ~ +85°C
એન્ટેના લંબાઈ22 સેમી / 8.6 ઇંચ
Antenna with dimensions indicated as 22 cm / 8.6 inches
Image: The antenna showing its approximate length of 22 cm (8.6 inches).
વિગતવાર view of the antenna components: tip, coil, and magnetic base
છબી: વિગતવાર view of the antenna's components, including the tip, coiled sections, magnetic base, and RP-SMA connector.

વોરંટી માહિતી

This BINGFU product is covered by the standard manufacturer's warranty. For specific details regarding warranty terms, duration, and claim procedures, please refer to the official BINGFU website or contact customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.

ગ્રાહક આધાર

For further assistance, technical support, or inquiries about your BINGFU antenna, please visit the official BINGFU store or contact their customer service department.

Official BINGFU Store: BINGFU Antennas Connectivity

સંબંધિત દસ્તાવેજો - BFN00213

પ્રિview કોડન રેડિયો કોમ્યુનિકેશન્સ પ્રોડક્ટ કેટલોગ અને કિંમત
કોડન રેડિયો કોમ્યુનિકેશન્સ માટે વ્યાપક ઉત્પાદન સૂચિ અને કિંમતનું અન્વેષણ કરો, જેમાં રેડિયો સાધનો, એસેસરીઝ અને સોફ્ટવેર સોલ્યુશન્સની વિશાળ શ્રેણી છે. વિગતવાર ઉત્પાદન નંબરો અને વર્ણનો શોધો. ampલાઇફાયર્સ, એન્ટેના, કેબલ્સ, સોફ્ટવેર લાઇસન્સ, અને વધુ.
પ્રિview Tenda 01-5G Outdoor CPE Attestation of Conformity
Attestation of Conformity issued by Bay Area Compliance Laboratories Corporation for the Tenda 01-5G Outdoor CPE, confirming compliance with EMC Directive 2014/30/EU and relevant harmonized standards.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.