VicTsing Wood Grain Essential Oil Diffuser User Manual

1. પરિચય

Thank you for choosing the VicTsing Wood Grain Essential Oil Diffuser. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new aromatherapy diffuser. Please read this manual thoroughly before using the product and retain it for future reference.

2. સલામતી સૂચનાઓ

To ensure safe operation and prevent damage to the product or injury to yourself, please observe the following safety precautions:

• Always place the diffuser on a stable, flat, and water-resistant surface.
• Do not place the diffuser near heat sources, direct sunlight, or on electronic devices.
• Use only clean tap water or distilled water. Do not use purified water or mineral water.
• Do not exceed the maximum water level indicated inside the water tank.
• Only use 100% pure, natural essential oils. Avoid corrosive or chemical-based oils.
• બાળકો અને પાલતુ પ્રાણીઓની પહોંચથી દૂર રાખો.
• Unplug the diffuser from the power outlet before cleaning or when not in use for extended periods.
• Do not touch the ultrasonic vibrating plate directly with your fingers or sharp objects.
• If the diffuser emits an unusual smell or sound, or if smoke appears, unplug it immediately.
• ઝાકળના આઉટલેટને અવરોધિત કરશો નહીં.

3. પેકેજ સામગ્રી

પેકેજને અનબોક્સ કરતી વખતે કૃપા કરીને તેની સામગ્રી તપાસો:

• 1 x VicTsing Wood Grain Essential Oil Diffuser
• 1 એક્સ એસી એડેપ્ટર
• 1 એક્સ માપન કપ
• 1 x વપરાશકર્તા માર્ગદર્શિકા

4. ઉત્પાદન ઓવરview

Familiarize yourself with the components of your diffuser:

Image 1: Components of the VicTsing Wood Grain Essential Oil Diffuser. This diagram illustrates the top cover, water tank, mist outlet, light button, mist button, and power input.

• ટોચનું કવર: Removable cover for accessing the water tank.
• પાણીની ટાંકી: Reservoir for water and essential oils.
• મિસ્ટ આઉટલેટ: Where the aromatherapy mist is released.
• લાઇટ બટન: Controls the LED light functions.
• ઝાકળ બટન: Controls the mist output and timer settings.
• એર આઉટલેટ: Ensures proper airflow.
• પાવર ઇનપુટ: AC એડેપ્ટર સાથે જોડાય છે.
• Ultrasonic Plate: Located at the bottom of the water tank, responsible for mist generation.

5. સેટઅપ

પ્રારંભિક સેટઅપ માટે આ પગલાં અનુસરો:

1. વિસારકને સપાટ, સ્થિર સપાટી પર મૂકો.
2. Remove the top cover by lifting it upwards.
3. Connect the AC adapter to the power input port at the bottom of the diffuser. Then, plug the adapter into a wall outlet.
4. Using the measuring cup, fill the water tank with clean tap water or distilled water up to the maximum water level line (150ml). Do not overfill.
5. Add 3-5 drops of 100% pure essential oil directly into the water tank. Adjust the amount based on personal preference and room size.
6. Replace the top cover, ensuring it is securely seated.

Image 2: Setup process for the VicTsing Wood Grain Essential Oil Diffuser. This image shows the steps of removing the cover, adding water and essential oil, and replacing the cover.

6. ઓપરેટિંગ સૂચનાઓ

Once set up, operate your diffuser using the two buttons:

Mist Button (Left Button)

• 1લી પ્રેસ: Continuous mist mode. The diffuser will operate until the water runs out.
• 2જી પ્રેસ: 1-hour timer mode. The diffuser will operate for 1 hour and then automatically shut off.
• 3જી પ્રેસ: 3-hour timer mode. The diffuser will operate for 3 hours and then automatically shut off.
• 4થી પ્રેસ: 6-hour timer mode. The diffuser will operate for 6 hours and then automatically shut off.
• 5થી પ્રેસ: Turn off the mist function.
• The diffuser features an automatic shut-off function when water runs out, regardless of the timer setting.

Light Button (Right Button)

• 1લી પ્રેસ: Turn on the LED light, which will cycle through 8 colors automatically.
• 2જી પ્રેસ: Fix the light to its current color.
• Subsequent Presses: Cycle through the 8 available colors to select your desired fixed color.
• લાંબા સમય સુધી દબાવો (2 સેકન્ડ): Turn off the light function.

7. જાળવણી

Regular cleaning helps ensure optimal performance and extends the lifespan of your diffuser. Clean the diffuser after every 5-6 uses or every 3-5 days.

1. પાવર આઉટલેટમાંથી વિસારકને અનપ્લગ કરો.
2. Remove the top cover and drain any remaining water from the water tank. Ensure to drain from the side opposite the air outlet to prevent water from entering internal components.
3. Add a small amount of warm water (not hot) and 1-2 drops of neutral detergent to the water tank.
4. Gently wipe the inside of the water tank and the ultrasonic plate with a soft cloth or cotton swab. Do not scrub aggressively.
5. Rinse the water tank with clean water, again avoiding the air outlet side.
6. ડિફ્યુઝરના બાહ્ય ભાગને નરમ, સૂકા કપડાથી સાફ કરો.
7. ફરીથી એસેમ્બલ કરતા પહેલા અથવા સ્ટોર કરતા પહેલા બધા ભાગોને હવામાં સંપૂર્ણપણે સૂકવવા દો.

મહત્વપૂર્ણ: Do not use corrosive cleaners, alcohol, or harsh chemicals. Do not immerse the diffuser base in water.

8. મુશ્કેલીનિવારણ

If you encounter issues with your diffuser, please refer to the following common problems and solutions:

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

VicTsing products are designed and manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official VicTsing website. Please have your product model name and purchase date available when contacting support.