Digitus USB to Serial Adapter User Manual

પરિચય

This manual provides instructions for the Digitus USB to Serial Adapter (Model DA-70167). This device enables data exchange between a personal computer with a USB port and various serial peripherals, such as machine controls, modems, and sensors. It is compliant with the USB 2.0 standard and features a PL2303GT chipset, offering customizable data transfer rates.

The adapter includes one USB 2.0 Male A connector and one D-SUB 9-Pin Male (RS232) connector, with gold-plated contacts for reliable connection. An 80 cm USB extension cable is also included for convenience.

પેકેજ સામગ્રી

• 1 x Digitus USB to Serial Adapter (DA-70167)
• 1 x 80 cm USB Extension Cable

ઉત્પાદન ઓવરview

આકૃતિ 1: Digitus USB to Serial Adapter. This image shows the main view of the adapter, highlighting its compact design and the D-SUB 9-pin connector.

આકૃતિ 2: Connection points of the adapter. This diagram illustrates the RS232 (D-SUB 9-pin) and USB A 2.0 connectors on the adapter.

આકૃતિ 3: ક્લોઝ-અપ view of the D-SUB 9-pin (RS232) male connector, showing the pin configuration.

આકૃતિ 4: View of the USB-A male connector, which plugs into the computer's USB port.

સેટઅપ

Follow these steps to set up your Digitus USB to Serial Adapter:

1. ડ્રાઇવર ઇન્સ્ટોલેશન: Before connecting the adapter, it is recommended to install the necessary drivers for the PL2303GT chipset. Drivers are typically available on the Digitus support website or can be automatically installed by your operating system upon first connection.
2. કમ્પ્યુટરથી કનેક્ટ કરો: Plug the USB-A male connector of the adapter into an available USB 2.0 port on your computer. You may use the included 80 cm USB extension cable if needed.
3. Connect to Serial Device: Connect the D-SUB 9-pin male (RS232) connector of the adapter to the serial port of your peripheral device (e.g., modem, machine control, label printer, barcode scanner, POS system, cash register, network switch). Ensure the screws on the D-SUB connector are tightened to secure the connection.

આકૃતિ 5: Diagram showing a one-to-one connection setup, illustrating the adapter connecting a label printer or other RS-232 device to a laptop/PC.

આકૃતિ 6: The USB to Serial Adapter connected to a network switch and a laptop, demonstrating a typical application.

ઓપરેટિંગ સૂચનાઓ

Once the adapter is physically connected and drivers are installed, your computer should recognize the new serial port. You can then use software applications that require serial communication to interact with your connected peripheral device.

• Identifying the COM Port: After installation, check your computer's Device Manager (Windows) or System Information (macOS/Linux) to identify the assigned COM port number for the USB to Serial Adapter. This port number will be used by your serial communication software.
• Configuring Software: Open your serial communication software (e.g., PuTTY, Tera Term, HyperTerminal) and configure it to use the identified COM port. Set the appropriate communication parameters such as baud rate (data transfer rate), data bits, parity, stop bits, and flow control, matching the requirements of your serial peripheral device. The adapter supports customizable data transfer rates between 75 bit and 128,000 bit per second.
• ડેટા એક્સચેન્જ: Initiate data exchange through your software. The adapter will facilitate the communication between your computer's USB port and the serial device.

આકૃતિ 7: Diagram illustrating the wide range of devices compatible with the USB to Serial Adapter, including switches, laptops/PCs, label writers, barcode scanners, POS systems, printers, modems, and cash registers.

જાળવણી

The Digitus USB to Serial Adapter requires minimal maintenance. Follow these guidelines to ensure its longevity:

• સફાઈ: Use a soft, dry cloth to clean the exterior of the adapter. Do not use liquid cleaners or solvents.
• સંગ્રહ: ઉપયોગમાં ન હોય ત્યારે એડેપ્ટરને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
• હેન્ડલિંગ: Avoid dropping the adapter or subjecting it to strong impacts. Do not bend or twist the cable excessively.
• કનેક્ટરની સંભાળ: Keep the connectors free from dust and debris. If necessary, use compressed air to clean the ports.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

વોરંટી અને આધાર

For warranty information and technical support, please refer to the official Digitus webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

Digitus Official Webસાઇટ: www.digitus.info