પરિચય
The ATOLLA T201 Laser Distance Meter is a digital measuring tool designed for precise distance, area, and volume calculations. It is suitable for both indoor and outdoor applications, making it ideal for architects, craftsmen, and DIY enthusiasts. This manual provides essential information for the safe and effective use of your device.
Image: The ATOLLA T201 Laser Distance Meter, showing its compact design and digital display.
સલામતી માહિતી
Please read this operating manual carefully before using the device. Failure to follow these instructions may result in injury or damage to the device.
- લેસર રેડિયેશન: Do not stare directly into the laser beam. Direct exposure to the laser beam can be hazardous to the eyes.
- બીમ દિશા: Do not point the laser beam at other people or reflective surfaces. Ensure the laser is directed above or below eye level.
- હેતુપૂર્વક ઉપયોગ: The ATOLLA T201 is designed solely as a measuring device. Do not use it as a control device or for any other unintended purpose.
- જાળવણી: Do not attempt to modify or disassemble the device. Repairs should only be performed by authorized service personnel.
- પર્યાવરણ: Avoid using the device in explosive environments or near flammable liquids and gases.
પેકેજ સામગ્રી
ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:
- 1 x ATOLLA Laser Distance Meter
- 2 x 1.5V AAA બેટરી
- 1 x હેન્ડ સ્ટ્રેપ
- ૧ x સૂચના માર્ગદર્શિકા (આ દસ્તાવેજ)
Image: The laser distance meter shown with the hand strap and two AAA batteries.
સેટઅપ
1. બેટરી સ્થાપિત કરી રહ્યા છીએ
- ઉપકરણની પાછળ બેટરી કમ્પાર્ટમેન્ટ કવર શોધો.
- Open the cover by sliding or lifting it according to the markings.
- Insert two 1.5V AAA batteries, ensuring correct polarity (+/-).
- બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.
૩.૩. હાથનો પટ્ટો જોડવો
Thread the hand strap through the designated loop on the device to prevent accidental drops during use.
ઓપરેટિંગ સૂચનાઓ
પાવર ચાલુ/બંધ
- દબાવો ON/READ ઉપકરણ ચાલુ કરવા માટે બટન.
- The device will automatically power off after 180 seconds of inactivity. The laser will turn off after 30 seconds of inactivity.
- મેન્યુઅલી પાવર ઓફ કરવા માટે, દબાવો અને પકડી રાખો OFF/Return બટન
ડિસ્પ્લે યુનિટ્સ બદલવું
The device supports measurement in meters (m), inches (in), and feet (ft).
- દબાવો અને પકડી રાખો U button for 2 seconds to cycle through the available display units.
Image: The device display showing different measurement units (m, in, ft) and how to switch between them.
Setting Reference Point
The measurement reference point can be set to the front or rear of the device. This is crucial for accurate measurements depending on your starting point.
- Press the reference point button (often indicated by an icon showing the device's base) to toggle between front and rear reference.
Image: The laser distance meter demonstrating two reference measurement points, showing the laser originating from different ends of the device.
માપન મોડ્સ
The ATOLLA T201 offers various measurement modes for different applications:
- એકલ માપ: દબાવો ON/READ once to activate the laser, then press again to take a single measurement.
- Continuous Measurement (Min/Max): This mode allows for tracking minimum and maximum distances as you move the device. Press the mode button until the continuous measurement icon appears.
- વિસ્તાર માપન: Measure two sides (length and width) to calculate the area.
- વોલ્યુમ માપન: Measure three sides (length, width, and height) to calculate the volume.
- Pythagorean Measurement (2 or 3 points): Used for indirect measurement of heights or distances where direct measurement is not possible. Follow the on-screen prompts to take the required measurements.
Image: Illustrations showing Pythagorean method (2 and 3 points), area measurement, and volume measurement modes in action.
Addition and Subtraction Function
તમે ઉપકરણ પર સીધા જ માપ ઉમેરી અથવા બાદ કરી શકો છો.
- માપ લીધા પછી, દબાવો + button to add the next measurement, or the - button to subtract it.
- Take the next measurement, and the device will automatically perform the calculation.
Image: A visual representation of how to use the addition and subtraction functions for measurements.
Reviewસંગ્રહિત માપન
The device can store up to 20 measurement records.
- Press the memory button (often indicated by a list or folder icon) to access stored measurements.
- Use the arrow buttons to navigate through the records.
Image: The device display showing a list of previously stored measurements.
સ્વ-કેલિબ્રેશન
The device features a self-calibration function to ensure accuracy. If necessary, measurement results can be adjusted by +/- 7 mm.
- Refer to the on-screen menu or specific button combinations for initiating self-calibration.
બબલ સ્તર
The integrated bubble levels assist in achieving precise vertical and horizontal alignment for more accurate measurements.
Image: Close-up of the ATOLLA T201 showing the integrated bubble levels for horizontal and vertical alignment.
જાળવણી
- સફાઈ: સોફ્ટનો ઉપયોગ કરો, ડીamp cloth to clean the device. Do not use abrasive cleaners or solvents.
- સંગ્રહ: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period.
- પાણી પ્રતિકાર: The device has an IP54 rating, meaning it is protected against dust and splashing water. Do not immerse it in water.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ઉપકરણ પાવર ચાલુ કરતું નથી. | ઓછી અથવા બંધ બેટરી; ખોટી બેટરી ઇન્સ્ટોલેશન. | Replace batteries with new 1.5V AAA batteries. Ensure correct polarity. |
| અચોક્કસ માપન. | Incorrect reference point; environmental factors (e.g., strong light, reflective surfaces); device needs calibration. | Verify reference point setting. Ensure target surface is non-reflective. Perform self-calibration if needed. |
| Laser not visible or weak. | Strong ambient light; dirty laser lens. | Use in lower light conditions if possible. Clean the laser lens with a soft cloth. |
| ડિસ્પ્લે ખાલી છે અથવા ઝબકતું છે. | Low batteries; device malfunction. | બેટરી બદલો. જો સમસ્યા ચાલુ રહે, તો ગ્રાહક સપોર્ટનો સંપર્ક કરો. |
વિશિષ્ટતાઓ
| લક્ષણ | વિગત |
|---|---|
| માપન શ્રેણી | ૦.૦૫ - ૩૦ મીટર |
| માપન ચોકસાઈ | +/- 2 મીમી |
| માપન એકમો | Meter (m), Inch (in), Foot (ft) |
| લેસર વર્ગ | વર્ગ II |
| લેસર પ્રકાર | 620-670 nm, <1 mW |
| ડિસ્પ્લે | 4-line multi-line LCD with backlight |
| ઓટો પાવર બંધ | નિષ્ક્રિયતાના 180 સેકંડ પછી |
| ઓટો લેસર બંધ | નિષ્ક્રિયતાના 30 સેકંડ પછી |
| પાણી પ્રતિકાર રેટિંગ | IP54 (Dust protected, splash water protected) |
| ઓપરેટિંગ તાપમાન | 0°C થી 40°C (32°F થી 104°F) |
| સંગ્રહ તાપમાન | -20°C થી 60°C (-4°F થી 140°F) |
| સંગ્રહ ભેજ | 75% આરએચ |
| Stored Records | 20 |
| બેટરીનો પ્રકાર | 2 x 1.5V AAA |
| સામગ્રી | PC/ABS |
| પરિમાણો (L x W x H) | ૩૭૦ x ૨૫૪ x ૧૧૦ મીમી (આશરે ૧૪.૫ x ૧૦ x ૪.૩ ઇંચ) |
| વજન | ૨૮૦ ગ્રામ (આશરે ૯.૯ ઔંસ) |
| કાર્યો | Min/Max, Area, Volume, Pythagorean (2/3 points), Addition/Subtraction, Mute, Self-calibration |
વોરંટી અને આધાર
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ATOLLA webસાઇટ. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.
અરજીઓ
The ATOLLA T201 Laser Distance Meter is versatile and can be used in various scenarios:
- Interior Renovation: Measuring rooms for flooring, painting, or furniture placement.
- Furniture Installation: Ensuring accurate dimensions for assembly and fitting.
- Home Decoration: Precisely hanging pictures, shelves, and other decorative items.
- Building Construction: Quick and accurate measurements on construction sites.
Image: A collage showing the laser distance meter being used in interior renovation, furniture installation, home decoration, and building construction.