iBeam Micro Camera Black Fixed Angle User Manual

1. પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. સલામતી માહિતી

• કોઈપણ ઇલેક્ટ્રિકલ ઇન્સ્ટોલેશન શરૂ કરતા પહેલા વાહનની બેટરી હંમેશા ડિસ્કનેક્ટ કરો.
• Ensure all wiring is properly insulated and secured to prevent short circuits or damage.
• ડ્રાઇવરને અવરોધશો નહીં view અથવા ઇન્સ્ટોલેશન દરમિયાન વાહન નિયંત્રણોમાં દખલ કરે છે.
• જો તમને ઇન્સ્ટોલેશન પ્રક્રિયાના કોઈપણ ભાગ વિશે ખાતરી ન હોય તો વ્યાવસાયિક ઇન્સ્ટોલરની સલાહ લો.
• This product is intended as an aid and should not replace safe driving practices.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• વાયરિંગ હાર્નેસ
• સૂચના માર્ગદર્શિકા (આ દસ્તાવેજ)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. ઉત્પાદન ઓવરview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

છબી: ક્લોઝ-અપ view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

મુખ્ય લક્ષણો:

• કોમ્પેક્ટ ડિઝાઇન: Small footprint for discreet installation.
• પાણી પ્રતિરોધક: IP68 rated for reliable performance in various weather conditions.
• છબી સેન્સર: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view અથવા આગળ view).
• માઉન્ટ કરવાનું: Features an 8MM threaded bolt for secure mounting.

5. સેટઅપ અને ઇન્સ્ટોલેશન

Follow these steps for proper installation of your iBeam Micro Camera:

1. માઉન્ટ કરવાનું સ્થાન પસંદ કરો: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. માઉન્ટિંગ સપાટી તૈયાર કરો: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. કેમેરા માઉન્ટ કરો: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. વાયરિંગ કનેક્શન્સ:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. પરીક્ષણ કાર્યક્ષમતા: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. સુરક્ષિત વાયરિંગ: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. ઓપરેટિંગ સૂચનાઓ

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• છબી દિશા: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. જાળવણી

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• સફાઈ: સમયાંતરે કેમેરા લેન્સને સોફ્ટ, ડી થી સાફ કરો.amp ગંદકી, ધૂળ અથવા પાણીના ડાઘ દૂર કરવા માટે કાપડ જે અવરોધ ઉભો કરી શકે છે viewઘર્ષક ક્લીનર્સનો ઉપયોગ કરશો નહીં.
• નિરીક્ષણ: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• ઉચ્ચ દબાણવાળા ધોવાનું ટાળો: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. મુશ્કેલીનિવારણ

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webસાઇટ. કોઈપણ વોરંટી દાવા માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

ઉત્પાદક: મેટ્રા ઇલેક્ટ્રોનિક્સ કોર્પ