પરિચય
Welcome to the user manual for the XENOCAM L336 Universal IR Learning Remote Control. This remote is designed to consolidate control of up to three infrared (IR) devices, such as TVs, VCRs, cable boxes, DVD players, satellite receivers, and audio systems. It features digital circulation learning technology for fast and accurate programming and retains memory even after battery replacement.
Please read these instructions carefully before using your remote control.
ઉત્પાદન લક્ષણો
- 3-in-1 functionality: Control up to three different IR devices.
- 126 programmable keys for comprehensive learning.
- Digital circulation learning technology for efficient programming.
- Permanent memory retention: Settings are saved even when batteries are removed.
- Compatible with various IR-controlled home appliances (TV, VCR, CBL, DVD, VCD, CD, SAT, HI-FI).
- ટકાઉ ABS પ્લાસ્ટિકમાંથી બનાવેલ.
- CE & ROHS certified.
પેકેજ સામગ્રી
- 1 x XENOCAM L336 Universal IR Learning Remote Control
- ૧ x વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
સેટઅપ
બેટરી ઇન્સ્ટોલેશન
The L336 remote control requires 2 AAA batteries (not included).
- રિમોટની પાછળના ભાગમાં બેટરી કમ્પાર્ટમેન્ટ કવર ખોલો.
- યોગ્ય ધ્રુવીયતા (+/-) સુનિશ્ચિત કરીને, 2 AAA બેટરી દાખલ કરો.
- બેટરી કમ્પાર્ટમેન્ટ કવર બંધ કરો.
નોંધ: If the remote cannot learn or the signal light flashes erratically, replace the batteries with new ones.
Learning Function (Programming the Remote)
The L336 remote learns functions directly from your original IR remote controls. Ensure your original remote is functional and uses infrared signals.
- લર્નિંગ મોડ દાખલ કરો: Press and hold the desired equipment key (e.g., TV, વીસીઆર, SAT) on the L336 remote until the indicator light illuminates steadily. Then release the key.
- પોઝિશન રિમોટ્સ: Place the L336 remote and your original remote control head-to-head, approximately 1 inch apart.
- શીખવાની શરૂઆત કરો: On your original remote, press the key you wish to program (e.g., Power, Volume Up). The indicator light on the L336 remote will flash quickly, indicating it has received the signal.
- Assign Function: Immediately press the corresponding key on the L336 remote where you want to store this function. The indicator light on the L336 will turn solid, confirming the function has been learned.
- Repeat for More Keys: Repeat steps 3 and 4 for all other keys you wish to learn for that device.
- Exit Learning Mode: Press the same equipment key (e.g., TV) again to exit learning mode. The indicator light will turn off.
મહત્વપૂર્ણ: The L336 can only learn from functional IR original remotes. It does not support RF (Radio Frequency) remotes.
Image: The XENOCAM L336 Universal IR Learning Remote Control. This image illustrates the remote's design, including its array of buttons and the IR emitter at the top, which should be aligned with the original remote during the learning process.
રિમોટનું સંચાલન
After successfully programming the L336 remote, you can use it to control your devices.
- Select the desired device by pressing the corresponding equipment key (e.g., TV, વીસીઆર, SAT). The indicator light may briefly illuminate to confirm selection.
- Point the L336 remote towards your device and press the programmed function keys (e.g., Power, Channel Up/Down, Volume Up/Down).
જાળવણી
- સફાઈ: રિમોટને નરમ, સૂકા કપડાથી સાફ કરો. પ્રવાહી ક્લીનર્સ અથવા ઘર્ષક સામગ્રીનો ઉપયોગ કરશો નહીં.
- બેટરી રિપ્લેસમેન્ટ: Replace batteries when the remote's indicator light becomes dim or unresponsive. Always replace both batteries at the same time.
- સંગ્રહ: રિમોટને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| રિમોટ જવાબ આપતો નથી. | મૃત અથવા ખોટી રીતે દાખલ કરેલી બેટરીઓ. | બેટરીની પોલેરિટી તપાસો અને નવી AAA બેટરીથી બદલો. |
| Learning fails (indicator light flashes quickly but doesn't turn solid). | Original remote is not IR, original remote is not working, or remotes are too far apart/misaligned. | Ensure original remote is IR and functional. Position remotes head-to-head, 1 inch apart. Try again. |
| Learned function does not work correctly. | Learning error or signal interference. | Repeat the learning process for that specific key. Ensure no obstructions during learning. |
| Remote loses programmed functions after battery change. | This remote features permanent memory retention. If this occurs, it indicates a fault. | ગ્રાહક સપોર્ટનો સંપર્ક કરો. |
વિશિષ્ટતાઓ
- મોડલ: એલ336
- સામગ્રી: એબીએસ પ્લાસ્ટિક
- Learning Keys: 126
- સમર્થિત ઉપકરણો: Up to 3 (TV, VCR, CBL, DVD, VCD, CD, SAT, HI-FI, etc.)
- Learning Technology: Digital Circulation IR Learning
- મેમરી: Permanent retention
- શક્તિ: 2 x AAA બેટરી (શામેલ નથી)
- પરિમાણો: આશરે 8.86 x 1.18 x 1.14 ઇંચ
- વજન: આશરે 2.39 ઔંસ
- પ્રમાણપત્રો: CE, ROHS
વોરંટી અને આધાર
This product is designed for reliability and performance. For any questions, technical assistance, or warranty inquiries, please contact XENOCAM customer support.
ચોક્કસ વોરંટી શરતો અને સંપર્ક માહિતી માટે કૃપા કરીને તમારા ખરીદી દસ્તાવેજોનો સંદર્ભ લો.