HiQuick 8 Bay Smart Battery Charger Instruction Manual

પરિચય

This manual provides detailed instructions for the safe and efficient operation of your HiQuick 8 Bay Smart Battery Charger. Please read this manual thoroughly before use and retain it for future reference.

પેકેજ સામગ્રી:

• 1 x HiQuick 8 Bay Smart Battery Charger (Model: SW-8N)
• 4 x HiQuick AA 2800mAh Ni-MH Rechargeable Batteries
• 4 x HiQuick AAA 1100mAh Ni-MH Rechargeable Batteries
• 1 x USB Type-C ચાર્જિંગ કેબલ
• 1 x વપરાશકર્તા માર્ગદર્શિકા

સેટઅપ

ચાર્જરને કનેક્ટ કરવું:

1. Connect the provided USB Type-C charging cable to the input port on the back of the charger.
2. Connect the other end of the USB cable to a compatible 5V 2A USB power source (e.g., a USB wall adapter, computer USB port, or power bank).
3. Ensure the power source is active. The LED indicators on the charger will briefly light up upon connection.

ઓપરેટિંગ સૂચનાઓ

બેટરી દાખલ કરવી:

The charger features 8 independent charging slots, accommodating both AA and AAA Ni-MH/Ni-Cd rechargeable batteries. Each slot can charge batteries individually.

1. Insert the batteries into the charging slots, ensuring the positive (+) and negative (-) poles match the indicators on the charger.
2. The charger can charge 1 to 8 batteries simultaneously.

એલઇડી સૂચક સ્થિતિ:

ચાર્જિંગ સમય:

• AAA 1100mAh batteries: Approximately 2 hours for 1-8 batteries.
• AA 2800mAh batteries: Approximately 4.5 hours for 1-8 batteries.

જાળવણી

બેટરી સંભાળ:

• Store batteries in a cool, dry place away from direct sunlight or high temperatures.
• For long-term storage, it is recommended to charge batteries once every 3 months to maintain optimal performance and prevent damage.
• Avoid mixing old and new batteries, or different types/brands of batteries, when using them in devices.

ચાર્જરની સંભાળ:

• ચાર્જરને સ્વચ્છ અને ધૂળ મુક્ત રાખો. સફાઈ માટે નરમ, સૂકા કપડાનો ઉપયોગ કરો.
• Do not disassemble or reassemble the charger, as it may cause short-circuit or fire hazard.
• Do not expose the charger to water or excessive humidity.

મુશ્કેલીનિવારણ

સામાન્ય મુદ્દાઓ:

• Batteries not charging (LED not red):
  • ખાતરી કરો કે USB કેબલ ચાર્જર અને પાવર સ્ત્રોત બંને સાથે સુરક્ષિત રીતે જોડાયેલ છે.
  • Verify the power source is active and providing 5V 2A output.
  • Check if batteries are inserted with correct polarity (+/-).
  • Confirm batteries are Ni-MH/Ni-Cd rechargeable type. Alkaline or non-rechargeable batteries will not charge.
  • જો બેટરી વોલtage is lower than 0.9V, the charger may not activate. Try removing and reinserting the battery.
• Charger or batteries getting hot:
  • This is normal during the charging process, but excessive heat may indicate an issue. Ensure proper ventilation around the charger.
  • જો વધુ ગરમ થવાનું ચાલુ રહે, તો ઉપયોગ બંધ કરો અને સપોર્ટનો સંપર્ક કરો.
• LED remains red after extended charging time:
  • The battery might be defective or has reached its end of life. Try charging another battery to confirm charger functionality.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

HiQuick products typically come with a 30-day money-back guarantee and a 1-year warranty. For specific warranty details or technical support, please refer to the warranty card included in your package or visit the official HiQuick webસાઇટ

For customer service inquiries, please contact HiQuick support via their official webસાઇટ અથવા તમારા ઉત્પાદન પેકેજિંગમાં આપેલી સંપર્ક માહિતી.

તમે પણ મુલાકાત લઈ શકો છો HiQuick Store on Amazon વધુ માહિતી માટે.