Saooer 20A Solar Charge Controller User Manual

પરિચય

This manual provides essential information for the safe and efficient operation of your Saooer 20A Solar Charge Controller. This intelligent regulator is designed to manage the working of solar panels and batteries in a solar system, featuring dual USB ports for mobile device charging. It is compatible with 12V and 24V systems and includes multiple protection functions to ensure system efficiency and prolong battery lifespan.

આકૃતિ 1: ફ્રન્ટ view of the Saooer 20A Solar Charge Controller.

સલામતી સૂચનાઓ

• Ensure all connections are correct before powering on the controller. Incorrect wiring can damage the device or connected components.
• The controller is designed for indoor use or in a protected environment. Avoid exposure to direct sunlight, high temperatures, or moisture.
• Do not attempt to disassemble or repair the controller yourself. Refer to qualified personnel for service.
• બાળકોની પહોંચથી દૂર રાખો.
• This controller is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not use with other battery types like Lithium-ion or LiFePO4, as this may cause damage or safety hazards.
• Always connect the battery first, then the solar panel, and finally the load. When disconnecting, reverse the order: disconnect the load, then the solar panel, and finally the battery.

ઉત્પાદન લક્ષણો

• ઓટોમેટિક સિસ્ટમ વોલ્યુમtage ઓળખ: Automatically detects 12V/24V system voltage.
• PWM Charging: Efficient Pulse Width Modulation charging mode.
• ડ્યુઅલ યુએસબી પોર્ટ્સ: Provides 5V/2A output for charging mobile devices.
• એલસીડી ડિસ્પ્લે: Clear display of status and data, allowing for convenient mode switching and parameter configuration.
• બહુવિધ સુરક્ષા કાર્યો: Includes short-circuit protection, open-circuit protection, reverse protection, and over-load protection.
• એડજસ્ટેબલ પરિમાણો: User-adjustable charge and discharge parameters.
• તાપમાન વળતર: Automatic temperature compensation for optimal charging.

સેટઅપ અને ઇન્સ્ટોલેશન

Follow these steps carefully to install your solar charge controller. Incorrect installation can lead to damage or malfunction.

1. વાયરિંગ તૈયાર કરો: Ensure all wires are properly stripped and have appropriate connectors if necessary. Use wires of sufficient gauge for your system's current.
2. બેટરી કનેક્ટ કરો: Connect the battery to the charge regulator first. Observe correct polarity (+ to + and - to -). The controller will automatically recognize the battery voltage (12V અથવા 24V).
   

   આકૃતિ 2: બાજુ view showing the connection terminals for battery, solar panel, and load.
3. સોલાર પેનલ જોડો: Connect the solar panel to the solar charge controller. Ensure correct polarity.
4. લોડ કનેક્ટ કરો: Connect the consumer or load to the charge controller regulator. Ensure correct polarity.

મહત્વપૂર્ણ નોંધ: Always connect the battery first, then the solar panel, and finally the load. When disconnecting the controller, please remove the solar panel, then the load, and finally the battery. This sequence helps the controller recognize the battery voltage correctly and prevents damage.

ઓપરેટિંગ સૂચનાઓ

એલસીડી ડિસ્પ્લે અને બટનો

આકૃતિ 3: કોણીય view showing the LCD display and control buttons.

The controller features an LCD display and three buttons for operation:

• મેનુ બટન: Used to cycle through display modes and enter parameter setting mode.
• ઉપર બટન: Used to increase values or navigate upwards in menus.
• ડાઉન બટન: Used to decrease values or navigate downwards in menus.

ડિસ્પ્લે મોડ્સ

Press the Menu button to cycle through the following display modes:

• બેટરી વોલ્યુમtage (V)
• સોલાર પેનલ વોલ્યુમtage (V)
• લોડ કરંટ (A)
• Battery Temperature (°C)
• ચાર્જ વર્તમાન (A)
• ડિસ્ચાર્જ કરંટ (A)
• Load Working Mode (24H, 0-23H, 0H)

પરિમાણ સેટિંગ્સ

To enter parameter setting mode, press and hold the Menu button for 5 seconds. Use the Up and Down buttons to adjust values, and the Menu button to confirm and move to the next parameter. Press and hold Menu again to exit setting mode.

Note: For 24V systems, multiply the 12V values by two.

જાળવણી

• નિયમિત તપાસ: સમયાંતરે બધા વાયરિંગ કનેક્શન્સને કડકતા અને કાટ માટે તપાસો.
• સ્વચ્છતા: Keep the controller clean and free from dust. Use a dry cloth for cleaning.
• વેન્ટિલેશન: ઓવરહિટીંગ અટકાવવા માટે કંટ્રોલરની આસપાસ પર્યાપ્ત વેન્ટિલેશનની ખાતરી કરો.
• બેટરી આરોગ્ય: મોનિટર બેટરી વોલ્યુમtage and health regularly. Replace batteries as needed.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

Figure 4: Product dimensions of the solar charge controller.

વોરંટી અને આધાર

For warranty information or technical support, please contact the manufacturer, Saooer, through their official channels. Refer to your purchase documentation for specific warranty terms and contact details.

ઉત્પાદક: Saooer

ASIN: B095764VB7

યુપીસી: 605832982977

તમે મુલાકાત લઈ શકો છો Saooer Store on Amazon વધુ માહિતી માટે અથવા સપોર્ટનો સંપર્ક કરવા માટે.