1. પરિચય

The HQ-Power DMX 4-Channel Splitter (Model HQDB10001) is designed to distribute a single DMX512 input signal into four isolated DMX512 outputs. This device ensures reliable signal transmission over longer distances and prevents signal degradation or interference between connected DMX devices. Its compact and robust design makes it suitable for various professional lighting applications.

2. સલામતી સૂચનાઓ

• ઉપકરણ ચલાવતા પહેલા બધી સૂચનાઓ કાળજીપૂર્વક વાંચો.
• ભવિષ્યના સંદર્ભ માટે આ માર્ગદર્શિકા રાખો.
• This device is intended for indoor use only. Do not expose it to rain or moisture.
• પાવર સપ્લાય વોલ્યુમની ખાતરી કરોtage ઉપકરણ પર ઉલ્લેખિત આવશ્યકતાઓ સાથે મેળ ખાય છે.
• Always disconnect the device from the power outlet before cleaning or servicing.
• જો પાવર કોર્ડ ક્ષતિગ્રસ્ત હોય તો ઉપકરણ ચલાવશો નહીં.
• ઉપકરણને ગરમીના સ્ત્રોતોની નજીક અથવા સીધા સૂર્યપ્રકાશમાં રાખવાનું ટાળો.
• ઉપકરણને જાતે રિપેર કરવાનો કે સુધારવાનો પ્રયાસ કરશો નહીં. બધી સર્વિસિંગ લાયક કર્મચારીઓને સોંપો.
• ઓવરહિટીંગને રોકવા માટે યુનિટની આસપાસ યોગ્ય વેન્ટિલેશનની ખાતરી કરો.

3. ઉત્પાદન ઓવરview

Familiarize yourself with the various components and connections of your HQ-Power DMX 4-Channel Splitter.

3.1 Front Panel: DMX Signal Outputs

• DMX Signal Output (1-4): Four isolated 3-pin XLR outputs for connecting DMX-controlled lighting fixtures.
• એલઇડી સૂચકાંકો: Green LEDs next to each output illuminate when a DMX signal is present on that channel.

3.2 Rear Panel: Power and DMX Input/Thru

• પાવર ઇનપુટ: Standard IEC power connector for connecting the included power cable.
• DMX ઇનપુટ: 3-pin XLR connector for receiving the DMX512 signal from a DMX controller.
• DMX Thru Output: 3-pin XLR connector for passing the DMX input signal directly to another DMX device or splitter.
• Terminal Switch (120R): A switch to activate or deactivate the 120 Ohm DMX termination resistor.

4. સેટઅપ

1. અનપેકીંગ: Carefully remove the DMX splitter from its packaging. Inspect the device for any signs of damage during transit.
2. પાવર કનેક્શન: Connect the provided power cable to the IEC power input on the rear panel of the splitter and then to a suitable AC power outlet (100-240V~, 50/60Hz).
3. DMX Input Connection: Connect your DMX controller's output to the DMX ઇનપુટ (3-pin XLR) on the rear panel of the splitter.
4. DMX Output Connections: Connect your DMX-controlled lighting fixtures to the DMX સિગ્નલ આઉટપુટ ports (1-4) on the front panel using standard 3-pin XLR DMX cables.
5. DMX Thru (Optional): If you need to daisy-chain the DMX signal to another DMX device or splitter, connect a DMX cable from the DMX Thru Output on the rear panel to the input of the next device.
6. સમાપ્તિ:
   • For the last device in a DMX chain, it is recommended to terminate the DMX signal with a 120 Ohm resistor to prevent signal reflections.
   • If this DMX splitter is the last device in your DMX chain (i.e., nothing is connected to the DMX Thru output and no other DMX devices are connected after the splitter's outputs), set the Terminal Switch (120R) on the rear panel to the 'ON' position.
   • If other DMX devices are connected after the splitter (via Thru or its outputs), ensure the termination is applied at the very end of the entire DMX chain, not necessarily on the splitter itself.

Ope. Opeપરેટિંગ

Once all connections are made and the device is powered on, the HQ-Power DMX 4-Channel Splitter operates automatically.

• પાવર ચાલુ: Plug the power cable into a wall socket. The power indicator (if present, usually a small LED near the power input) will illuminate.
• સિગ્નલ વિતરણ: The DMX signal received at the DMX Input will be amplified and distributed to all four DMX Signal Outputs.
• આઉટપુટ સૂચકાંકો: The green LEDs next to each DMX output port will flash or illuminate steadily when a valid DMX signal is being transmitted through that output. This indicates proper signal flow.
• આઇસોલેશન: Each output is electrically isolated, meaning a fault on one output line will not affect the other outputs or the DMX input.

6. જાળવણી

• સફાઈ: Disconnect the device from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• સંગ્રહ: When not in use for extended periods, store the device in a dry, dust-free environment, preferably in its original packaging.
• નિરીક્ષણ: Periodically check all cables and connectors for wear or damage. Replace any damaged components immediately.

7. મુશ્કેલીનિવારણ

If troubleshooting steps do not resolve the issue, contact HQ-Power customer support or a qualified technician.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

Warranty information for the HQ-Power DMX 4-Channel Splitter (Model HQDB10001) is typically provided with your purchase documentation or on the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, service, or further inquiries, please visit the official HQ-Power webસાઇટ અથવા તમારા સ્થાનિક ડીલરનો સંપર્ક કરો.