Beleeb Adjustable Battery Charger User Manual

1. પરિચય

Thank you for choosing the Beleeb Adjustable Battery Charger, Model BLB-C30. This versatile charger is designed to efficiently charge and maintain a wide range of battery types and voltages, from 12V to 72V. It features a smart LCD display, pulse repair capabilities, and desulfation technology to extend battery life. Please read this manual thoroughly before operation to ensure safe and optimal performance.

2. સલામતી માહિતી

ચેતવણી: તમામ સલામતી ચેતવણીઓ અને સૂચનાઓ વાંચો. ચેતવણીઓ અને સૂચનાઓનું પાલન કરવામાં નિષ્ફળતાના પરિણામે ઇલેક્ટ્રિક આંચકો, આગ અને/અથવા ગંભીર ઈજા થઈ શકે છે.

• બેટરી સાથે કામ કરતી વખતે હંમેશા યોગ્ય વ્યક્તિગત રક્ષણાત્મક ઉપકરણો પહેરો, જેમાં આંખનું રક્ષણ અને મોજાનો સમાવેશ થાય છે.
• Ensure adequate ventilation during charging to prevent the buildup of explosive gases.
• વરસાદ અથવા ભીની સ્થિતિમાં ચાર્જરને ખુલ્લા પાડશો નહીં.
• Never attempt to charge a frozen or damaged battery.
• Ensure the charger is disconnected from the AC power outlet before making or breaking connections to the battery.
• Keep the charger and battery away from open flames, sparks, and heat sources.
• This charger is for charging lead-acid (SLA, AGM, GEL, Deep Cycle) and LiFePO4 batteries with Battery Management Systems (BMS) only. Do not use for other battery types.

3. ઉત્પાદન ઓવરview

3.1 ઘટકો અને નિયંત્રણો

• એલસીડી ડિસ્પ્લે: રીઅલ-ટાઇમ વોલ્યુમ બતાવે છેtage, amperage, and error codes.
• સૂચક પ્રકાશ: Red for charging, Green for fully charged.
• વીજળીનું બટન: ON/OFF switch for the unit.
• Level Volt Knob: Selects the charging voltage (12V, 24V, 36V, 48V, 60V, 72V) and 'H' mode for pulse repair/equalization.
• Ampere Control Knob: Adjusts the charging current (Low, Medium, High).
• આઉટપુટ ટર્મિનલ્સ: Positive (+) and Negative (-) connections for battery clamps.
• Overload Reset Button: Resets the charger in case of an overload.
• એસી ઇનપુટ: Power cord connection (110V, 50/60Hz).

4. સેટઅપ અને કનેક્શન

Follow these steps to safely connect your battery charger:

1. Ensure the charger's power switch is in the બંધ સ્થિતિ
2. Connect the red (positive) battery clamp બેટરીના હકારાત્મક (+) ટર્મિનલ પર.
3. Connect the black (negative) battery clamp બેટરીના નકારાત્મક (-) ટર્મિનલ પર.
4. Plug the charger's AC power cord into a standard 110V, 50/60Hz electrical outlet.
5. યોગ્ય વોલ્યુમ પસંદ કરોtage પર Level Volt Knob that matches your battery's voltage.
6. Turn the charger's power switch to the ON position. The red indicator light will illuminate, and the LCD display will show the charging status.

5. ઓપરેટિંગ સૂચનાઓ

5.1 વોલ્યુમtage પસંદગી

આ Level Volt Knob allows you to select the appropriate voltage for your battery pack. Ensure the selected voltage matches your battery's nominal voltage (e.g., 12V, 24V, 36V, 48V, 60V, 72V). If an incorrect voltage is selected, the charger may stop charging after a few seconds to protect your battery. To restart, adjust the knob to the correct voltage and cycle the power switch.

5.2 Amperage નિયંત્રણ

નો ઉપયોગ કરો Ampere Control Knob to select the charging current: નીચું, મધ્યમ, અથવા ઉચ્ચ. A lower current provides a slower, more thorough charge, which is beneficial for battery health and desulfation. A higher current offers faster charging.

5.3 Pulse Repair (H Mode) and Desulfation

The 'H' position on the Level Volt Knob activates the pulse repair and desulfation mode. This mode applies high-voltage pulses to break up sulfate crystals that can build up on lead-acid battery plates, restoring lost battery performance and extending battery lifespan. This mode also functions as an equalizing charge, balancing individual cells within a battery pack.

5.4 Charging Process and Indicators

The charger utilizes a multi-stage charging process to optimize battery health and charging efficiency:

• Stage 1: Deep Discharge Charging Pulse Mode: For deeply discharged batteries.
• Stage 2: Constant Current Mode (CC): Current is constant, voltage ધીમે ધીમે વધે છે.
• Stage 3: Constant Voltage Mode (CV): ભાગtage is constant, current slowly reduces.
• Stage 4: Standby Voltage મોડ: Current slowly reduces to zero, maintaining the battery.

આ એલસીડી ડિસ્પ્લે shows real-time voltage અને amperage આ સૂચક પ્રકાશ will be red during charging and turn green when the battery is fully charged (current drops to 0 amps). The charger can be left connected indefinitely without harming the battery once fully charged.

6. જાળવણી

• સફાઈ: Disconnect the charger from power and battery. Wipe the casinનરમ, સૂકા કપડાથી ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• કેબલ કેર: Inspect battery cables and clamps for damage before each use. Replace if frayed or broken.
• સંગ્રહ: Store the charger in a cool, dry place when not in use. Keep out of reach of children.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

Beleeb offers various protection plans for your product. Please refer to your purchase documentation for specific warranty details and terms. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Beleeb customer service.

PDF ફોર્મેટમાં સત્તાવાર વપરાશકર્તા માર્ગદર્શિકા પણ ડાઉનલોડ કરવા માટે ઉપલબ્ધ છે: યુઝર મેન્યુઅલ (PDF) ડાઉનલોડ કરો