tectake Bar Table with 4 Stools - Industrial Style

પરિચય

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

સલામતી સૂચનાઓ

• એસેમ્બલી પહેલાં ખાતરી કરો કે બધા ઘટકો હાજર છે અને તેમને કોઈ નુકસાન થયું નથી. જો કોઈ ભાગો ખૂટે છે અથવા ક્ષતિગ્રસ્ત છે, તો તેનો ઉપયોગ કરશો નહીં.
• સ્ક્રેચમુદ્દે અટકાવવા માટે ઉત્પાદનને નરમ, સ્વચ્છ સપાટી પર એસેમ્બલ કરો.
• Tighten all screws and bolts securely, but do not overtighten to avoid damaging the material.
• બધા જોડાણો કડક રહે તેની ખાતરી કરવા માટે નિયમિતપણે તપાસો.
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• ગૂંગળામણના જોખમોને રોકવા માટે નાના ભાગો અને પેકેજિંગ સામગ્રીને બાળકોથી દૂર રાખો.
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

પેકેજ સામગ્રી

Before starting assembly, please verify that all the following components are included in your package:

• ૧ x બાર ટેબલ
• 4 x Bar Stools
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 1 x Assembly Manual (this document)

Image: Detailed diagram of product dimensions and included components.

એસેમ્બલી સૂચનાઓ

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. અનપૅક ઘટકો: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. ટેબલ ફ્રેમ એસેમ્બલ કરો: Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. ટેબલટોપ જોડો: Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. Assemble Stool Frames: For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Attach Stool Seats: Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. એડજસ્ટેબલ ફીટ ઇન્સ્ટોલ કરો: Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. અંતિમ કડકીકરણ: Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

ઓપરેટિંગ સૂચનાઓ

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• સ્થિરતા: Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• જગ્યા બચત: The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• લોડ ક્ષમતા: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• પ્લેસમેન્ટ: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

જાળવણી

Proper care will extend the life and appearance of your tectake furniture set:

• સફાઈ: Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• નિયમિત તપાસો: Periodically inspect all screws and bolts to ensure they are tight. Retighten if necessary.
• રક્ષણ: ટેબલટોપને ઢોળાઈ જવાથી, ગરમીથી અને સ્ક્રેચથી બચાવવા માટે કોસ્ટર અથવા પ્લેસમેટનો ઉપયોગ કરો.
• પર્યાવરણ: Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

મુશ્કેલીનિવારણ

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Wobbling Table/Stool:
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• એસેમ્બલી દરમિયાન મુશ્કેલી:
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • Do not overtighten screws until all parts are loosely fitted, then tighten them gradually.
  • Refer to the assembly diagrams for correct orientation of parts.
• સ્ક્રેચ અથવા ડેન્ટ્સ:
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Prevent future damage by using protective pads under items placed on the table.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: tectake Official Store