ZÜNDAPP Kingmeter LED Display T320 Green 1.0 / Z101 / Z101+ User Manual

પરિચય

This manual provides essential information for the proper installation, operation, and maintenance of your ZÜNDAPP Kingmeter LED Display. This display is compatible with ZÜNDAPP Green 1.0, Z101, and Z101+ electric bicycles manufactured from July 2021 onwards. Please read these instructions carefully before use to ensure optimal performance and safety.

ઉત્પાદન ઓવરview

The ZÜNDAPP Kingmeter LED Display serves as the central control unit for your electric bicycle, providing critical information and allowing you to manage assistance levels.

છબી: આગળ view of the ZÜNDAPP Kingmeter LED Display, showing the power button, assist level buttons (+/-), and light control button. LED indicators for power and assist levels are visible at the top.

The display unit includes:

• એલઇડી સૂચકાંકો: For battery charge level and pedal assistance level.
• નિયંત્રણ બટનો: Four buttons for power, assistance level adjustment, and light control.
• કેબલ: A 220 mm cable with a 5-pin round BUS connector.

સેટઅપ અને ઇન્સ્ટોલેશન

Follow these steps to properly install the Kingmeter LED Display on your electric bicycle.

1. ડિસ્પ્લે માઉન્ટ કરવાનું:

   The display features a 22.2 mm clamp, suitable for most standard bicycle handlebars. Position the display on your handlebar in a location that is easily accessible and visible while riding, without obstructing other controls. Securely tighten the clamp ફીટ.

   

   છબી: એક ક્લોઝ-અપ view of an electric bicycle handlebar with the ZÜNDAPP Kingmeter LED Display mounted. The display is centrally positioned for easy access and visibility.

2. કેબલને કનેક્ટ કરી રહ્યું છે:

   Locate the corresponding 5-pin round BUS connector on your electric bicycle's wiring harness. Carefully align the pins and push the display's connector firmly into place until it clicks. Ensure a secure connection to prevent moisture ingress and signal loss.

   

   છબી: વિગતવાર view of the 5-pin round BUS connector, showing the pin configuration. This connector is used to link the display to the e-bike's electrical system.

   

   છબી: The rear side of the ZÜNDAPP Kingmeter LED Display, showing the integrated cable and a sticker indicating "36V", confirming its voltage સુસંગતતા.

ઓપરેટિંગ સૂચનાઓ

The Kingmeter LED Display features a simple 4-button interface for easy operation.

છબી: સ્પષ્ટ view of the ZÜNDAPP Kingmeter LED Display, highlighting the four control buttons: Power (red), Plus (+), Minus (-), and Light (headlight icon). LED indicators for battery and assist levels are also visible.

• પાવર ચાલુ/બંધ: દબાવો અને પકડી રાખો લાલ પાવર બટન (⑂) to turn the display and the e-bike system on or off.
• Adjusting Assistance Level:
  • દબાવો '+' બટન to increase the pedal assistance level.
  • દબાવો '-' બટન to decrease the pedal assistance level.
  • The current assistance level (0, 1, 2, 3) is indicated by the LED lights. Level 0 means no assistance.
• પ્રકાશ નિયંત્રણ: દબાવો લાઇટ બટન (🚲) to turn your e-bike's lights on or off.
• બેટરી સ્તર સૂચક: The "POWER" LED indicators at the top of the display show the remaining battery charge. "LOW" indicates a low battery level.

જાળવણી

To ensure the longevity and proper functioning of your Kingmeter LED Display, follow these simple maintenance guidelines:

• સફાઈ: Wipe the display surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic and electronic components.
• ભેજ સંરક્ષણ: While the display is designed for outdoor use, avoid prolonged exposure to heavy rain or direct water jets. Ensure the connector is always securely fastened.
• કેબલ નિરીક્ષણ: Periodically check the cable and connector for any signs of wear, damage, or corrosion. Replace if necessary.
• સંગ્રહ: જ્યારે લાંબા સમય સુધી ઉપયોગમાં ન હોય, ત્યારે ઈ-બાઈકને સૂકા, સમશીતોષ્ણ વાતાવરણમાં સંગ્રહિત કરો અને પ્રદર્શિત કરો.

મુશ્કેલીનિવારણ

If you encounter issues with your Kingmeter LED Display, refer to the following common problems and solutions:

If you cannot resolve the issue using the troubleshooting guide, please contact ZÜNDAPP customer support or an authorized service center.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

For warranty information, please refer to the documentation provided with your electric bicycle or contact your point of purchase. For technical support or service inquiries, please visit the official ZÜNDAPP webસાઇટ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો.

નોંધ: Unauthorized modifications or repairs may void your warranty.