એપેરા ઇન્સ્ટ્રુમેન્ટ્સ ગ્રોસ્ટાર સિરીઝ GS3 EC/ppm પેન ટેસ્ટર કિટ (AI103G) યુઝર મેન્યુઅલ

1. પરિચય

This manual provides detailed instructions for the Apera Instruments GroStar Series GS3 EC/ppm Pen Tester Kit (AI103G). This lab-grade conductivity meter is designed for accurate measurement of EC (Electrical Conductivity), 500ppm, and 700ppm, along with temperature, making it suitable for hydroponics and general water quality testing. The device features a replaceable titanium conductivity sensor and a user-friendly interface.

2. ઉત્પાદન ઓવરview

The GroStar Series GS3 EC/ppm Pen Tester is engineered for reliability and ease of use. Key features include:

• Measures conductivity (EC), 500ppm, 700ppm, and temperature.
• Replaceable titanium sensor for high accuracy in the 0 to 10 EC range.
• Backlit HD screen for clear readings.
• Grower-friendly calibration workflow with a calibration reminder function.

Figure 1: Apera Instruments GroStar Series GS3 EC/ppm Pen Tester.

આકૃતિ 2: ક્લોઝ-અપ view of the durable titanium alloy sensor for conductivity measurements.

Figure 3: The GroStar GS3 Pen Tester demonstrating its water resistance during use.

3. સેટઅપ

Before first use, ensure all components are present and the device is ready for operation.

૧.૧ બોક્સમાં શું છે

• Apera Instruments GroStar Series GS3 EC/ppm Pen Tester (Gen II)
• 2.77 EC Calibration Solution
• લેનયાર્ડ
• 4 AAA batteries (pre-installed or included separately)

Figure 4: The complete kit contents, including the tester, calibration solution, and lanyard.

3.2 બેટરી ઇન્સ્ટોલેશન

The device requires 4 AAA batteries. If not pre-installed, open the battery compartment located at the top of the tester, insert the batteries according to the polarity indicators, and securely close the compartment.

3.3 પ્રારંભિક તૈયારી

1. સેન્સરમાંથી રક્ષણાત્મક કેપ દૂર કરો.
2. Rinse the sensor with distilled or deionized water.
3. Gently shake off excess water.

4. ઓપરેટિંગ સૂચનાઓ

4.1 પાવર ચાલુ/બંધ

દબાવો પાવર button to turn the tester on or off.

4.2 એક માપન લેવું

1. Ensure the tester is clean and calibrated.
2. સેન્સરને s માં નિમજ્જિત કરોample solution, ensuring the sensor is fully submerged.
3. ધીમે ધીમે હલાવો અને ડિસ્પ્લે પર રીડિંગ સ્થિર થાય ત્યાં સુધી રાહ જુઓ.
4. The display will show EC/ppm and temperature readings.

4.3 Switching Measurement Modes (EC/ppm)

દબાવો MODE/UNITS button to cycle through EC, 500ppm, and 700ppm measurement modes.

Figure 5: The tester's display cycling through different measurement units.

4.4 કાર્ય રાખો

દબાવો પકડી રાખો ડિસ્પ્લે પર વર્તમાન રીડિંગ ફ્રીઝ કરવા માટે બટન. રિલીઝ કરવા માટે ફરીથી દબાવો.

4.5 TruRead Display

The TruRead display provides MAX, AVG, and MIN readings, offering a comprehensive view of your measurements.

Figure 6: The TruRead display feature, showing maximum, average, and minimum recorded values.

5. માપાંકન

Regular calibration ensures accurate measurements. The GS3 features a grower-friendly calibration workflow and a reminder function.

5.1 માપાંકન પ્રક્રિયા

1. ટેસ્ટર ચાલુ કરો.
2. દબાવો CAL કેલિબ્રેશન મોડમાં પ્રવેશવા માટે બટન.
3. Immerse the sensor into the 2.77 EC calibration solution.
4. The tester will automatically recognize the solution and calibrate. Wait for the stable reading and confirmation.
5. Rinse the sensor with distilled water after calibration.

Figure 7: Visual representation of the tester's display in measurement, calibration, and error states.

5.2 Calibration Reminder

The tester will automatically remind you when recalibration is due, ensuring consistent accuracy.

6. જાળવણી

6.1 સેન્સરની સફાઈ

After each use, rinse the sensor thoroughly with distilled or deionized water to prevent residue buildup. Do not scrub the sensor vigorously.

6.2 સંગ્રહ

Always replace the protective cap after use. For long-term storage, ensure the sensor is kept moist. Refer to the product packaging or Apera Instruments website for specific storage solution recommendations if applicable.

૧૨.૪ સેન્સર બદલવું

The titanium EC sensor is replaceable. If the sensor performance degrades significantly or it becomes damaged, a new sensor can be purchased and easily installed by twisting off the old one and attaching the new one.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

• મોડલ નંબર: AI103G
• ઉત્પાદન પરિમાણો: 7 x 1.5 x 1.3 ઇંચ
• વજન: 4.69 ઔંસ
• પાવર સ્ત્રોત: 4 AAA બેટરી (સમાવેલ)
• સેન્સર પ્રકાર: Replaceable Titanium EC Probe
• માપન પરિમાણો: EC, 500ppm, 700ppm, Temperature
• પ્રથમ ઉપલબ્ધ તારીખ: સપ્ટેમ્બર 28, 2022

9. વોરંટી અને સપોર્ટ

Apera Instruments products are backed by a manufacturer's warranty. For detailed warranty information, technical support, or to purchase replacement parts, please visit the official Apera Instruments webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. વોરંટી દાવાઓ માટે તમારી ખરીદી રસીદ રાખો.

ઉત્પાદક: એપેરા ઇન્સ્ટ્રુમેન્ટ્સ