Spigen OneTap 3 (MagFit) Car Mount Instruction Manual

1. ઉત્પાદન ઓવરview

The Spigen OneTap 3 (MagFit) is a magnetic car mount designed for secure phone placement in Tesla vehicles. It features OneTap Technology for easy attachment and a robust magnetic hold.

સુસંગતતા

This car mount is compatible with:

• Tesla Model 3, Model Y, Model S (2021+), and Model X (2021+).
• iPhone 16, 15, 14, 13, and 12 series.
• MagSafe compatible cases are required for optimal magnetic attachment.

આકૃતિ 1: સુસંગતતા સમાપ્તview for Tesla models and iPhone series.

The mount's sleek design integrates seamlessly with your Tesla's interior, providing a discreet and functional phone holder.

આકૃતિ 2: Spigen OneTap 3 mount installed in a Tesla, showcasing its subtle design and integrated cable organizer.

2. સ્થાપન માર્ગદર્શિકા

Follow these steps for a secure and lasting installation of your Spigen OneTap 3 car mount.

તૈયારી:

1. Identify the desired mounting location behind the corner of your Tesla's display screen.
2. Clean the surface thoroughly with isopropyl alcohol and ensure it is completely dry before proceeding. This removes any dust or oils that could compromise adhesion.
3. Ensure the car interior is not excessively hot during installation to allow for proper adhesive curing.

માઉન્ટ કરવાનું પગલાં:

1. Remove the protective film from the pre-applied adhesive on the back of the mount.
2. Carefully position the mount behind the corner of your Tesla's screen.
3. Press firmly on the mount for at least 30 seconds to ensure strong initial adhesion.
4. મહત્વપૂર્ણ: Allow a curing time of at least 8 hours for optimal adhesion. For full strength, wait 24 hours before attaching your phone or adjusting the mount.

આકૃતિ 3: Visual guide for secure installation, showing adhesive placement and recommended curing times.

આકૃતિ 4: Step-by-step installation process for the Spigen OneTap 3 car mount.

An extra adhesive pad is included for future re-installation if needed.

3. ઓપરેટિંગ સૂચનાઓ

તમારો ફોન જોડવો:

The Spigen OneTap 3 utilizes MagFit technology for a strong magnetic connection with your iPhone (12 series or newer) or MagSafe compatible case.

1. Ensure your iPhone or case is MagSafe compatible.
2. Simply bring your iPhone close to the magnetic head of the mount. It will snap securely into place.

આકૃતિ 5: Magnetic attachment of an iPhone to the OneTap 3 mount.

એડજસ્ટ કરી રહ્યું છે Viewએન્ગલ:

The mount features an adjustable swing arm and swivel head for optimized viewખૂણો

• સ્વિંગ આર્મ: Press the button on the side of the arm to adjust its position. It locks into 0-degree, 45-degree, and 90-degree angles, allowing for both horizontal and vertical phone orientation.
• Swivel Head: The magnetic head can be rotated 360 degrees to fine-tune your phone's orientation.

આકૃતિ 6: એડજસ્ટેબલ viewing angles, showing horizontal and vertical phone positions.

આકૃતિ 7: Detail of the adjustable arm mechanism and cable organizer.

કેબલ મેનેજમેન્ટ:

The mount includes two cable head organizing tapes to keep your charging cables tidy and accessible.

૪.૧. વિડિઓ ઇન્સ્ટોલેશન માર્ગદર્શિકા

For a visual demonstration of the product and installation, please watch the official video below.

5. સંભાળ અને જાળવણી

To ensure the longevity and optimal performance of your Spigen OneTap 3 car mount:

• Clean the mount periodically with a soft, damp કાપડ. કઠોર રસાયણો અથવા ઘર્ષક ક્લીનર્સ ટાળો.
• Ensure the adhesive area remains clean and free from debris. If re-installation is necessary, use the provided extra adhesive pad.
• Avoid exposing the mount to extreme temperatures for prolonged periods, as this may affect the adhesive.

6. મુશ્કેલીનિવારણ

If you encounter issues with your Spigen OneTap 3 car mount, consider the following:

• Mount not adhering properly: Ensure the installation surface was clean and dry, and that sufficient curing time (at least 8 hours, ideally 24 hours) was allowed after initial application. Re-apply with the extra adhesive pad if necessary.
• Phone not holding magnetically: Verify that your iPhone is a 12 series or newer, or that your phone case is MagSafe compatible. Ensure no foreign objects are between the phone/case and the mount's magnetic surface.
• Arm not adjusting smoothly: Check for any obstructions in the hinge mechanism. If the issue persists, contact customer support.

7. ઉત્પાદન સ્પષ્ટીકરણો

8. વોરંટી અને સપોર્ટ

વોરંટી માહિતી:

આ ઉત્પાદન એ સાથે આવે છે 24 મહિનાની ચિંતામુક્ત વોરંટી. વોરંટી દાવાઓ માટે કૃપા કરીને તમારી ખરીદીનો પુરાવો રાખો.

ગ્રાહક આધાર:

For any questions, technical assistance, or warranty claims, please visit the official Spigen website or contact their customer support directly. Refer to the product packaging for specific contact details.