KKnoon TOOLTOP ET618 Handheld Portable Cable Tester User Manual

1. પરિચય

The KKnoon TOOLTOP ET618 is a versatile handheld portable cable tester designed for network and electrical professionals. It integrates multiple functions including cable tracing, cable length measurement, Power over Ethernet (PoE) testing, and a full-featured digital multimeter. This manual provides detailed instructions for the safe and effective use of your ET618 device.

Figure 1: KKnoon TOOLTOP ET618 Handheld Portable Cable Tester (Main Unit and Receiver)

2. સલામતી માહિતી

આ ઉત્પાદનનો ઉપયોગ કરતા પહેલા કૃપા કરીને બધી સલામતી ચેતવણીઓ અને સંચાલન સૂચનાઓ વાંચો અને સમજો. આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ઇલેક્ટ્રિક શોક, આગ અથવા ગંભીર ઈજાનું કારણ બની શકે છે.

• Do not use the device if it appears damaged or is not operating correctly.
• Always ensure the device is powered off before connecting or disconnecting cables.
• ઉપકરણને ભેજ અથવા આત્યંતિક તાપમાનમાં ખુલ્લું પાડશો નહીં.
• Use only the specified charging cable and accessories.
• Do not attempt to open or repair the device; refer all servicing to qualified personnel.
• Be cautious when working with live circuits, especially during multimeter functions.

3. પેકેજ સામગ્રી

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં શામેલ છે:

• 1 x ET618 Host (Main Unit)
• 1 x રીસીવર
• ૧ x વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
• 1 x Clip Line
• 1 એક્સ નેટવર્ક કેબલ
• 1 x Recharging Line (USB cable)
• 1 x સ્ટોરેજ બેગ
• 1 x Temperature Probes
• 1 x Multimeter Probes

4. ઉત્પાદન ઓવરview

The ET618 combines a cable tester and a digital multimeter into one compact device. It features an LCD display for clear readings and a built-in flashlight for use in low-light conditions.

Figure 2: ET618 Main Unit and Receiver with Dual Flashlight

મુખ્ય લક્ષણો:

• કેબલ ટ્રેસિંગ: Quickly locate target cables in bundles.
• Cable Length Test: Measure the length of various metal cables up to 500 meters.
• PoE ટેસ્ટ: Check cable mapping polarity and voltage of PoE network switches.
• Multimeter Functions: Measure DC/AC voltage, DC/AC current, resistance, continuity, diode, and temperature.
• એલસીડી ડિસ્પ્લે: Large screen for clear data visualization.
• ફ્લેશલાઇટ: Integrated light for improved visibility in dark environments.
• એડજસ્ટેબલ સંવેદનશીલતા: Digital tracing sensitivity can be adjusted.

Figure 3: Product Differentiation (ET616 vs. ET618)

The ET618 model includes all features of the ET616, plus a comprehensive multimeter function and an extended cable length measurement range of up to 500 meters.

5. સેટઅપ

5.1 બેટરી ચાર્જ કરી રહી છે

The ET618 main unit is powered by a rechargeable lithium battery. Before first use, fully charge the device.

1. Connect the provided recharging line (USB cable) to the charging port on the ET618 main unit.
2. USB કેબલના બીજા છેડાને પ્રમાણભૂત USB પાવર એડેપ્ટર (શામેલ નથી) અથવા કમ્પ્યુટર USB પોર્ટ સાથે કનેક્ટ કરો.
3. The charging indicator on the device will show the charging status. Once fully charged, disconnect the cable.

Figure 4: Charging the ET618 Lithium Battery

5.2 પાવરિંગ ચાલુ/બંધ

Press and hold the power button on the main unit to turn the device on or off. The LCD display will illuminate upon power-on.

6. ઓપરેટિંગ સૂચનાઓ

6.1 Cable Tracing Function

This function helps locate a specific cable among many, useful for telephone systems, computer networks, and BNC cables.

1. Connect the cable to be traced to the appropriate port on the ET618 main unit (e.g., RJ45 for network cables).
2. Select the "Trace" mode on the main unit.
3. Use the receiver to scan the cables. The receiver will emit an audible tone or visual indication when it detects the signal from the target cable.
4. Adjust the sensitivity on the receiver for precise tracing.

6.2 Cable Length Test

Measure the length of various metal cables with at least two cores, including network cables, telephone lines, and BNC cables.

1. Ensure the cable is disconnected from any active network or power source.
2. Connect one end of the cable to the main unit's appropriate port.
3. Select the "Length" test mode. The device will display the measured cable length on the LCD.

6.3 POE Test

Test Power over Ethernet (PoE) network switches to check cable mapping polarity and voltage.

1. Connect the network cable from the PoE switch to the main unit's RJ45 port.
2. Select the "POE" test mode.
3. The LCD will display information regarding PoE voltage and cable mapping.

6.4 Multimeter Function (ET618 Only)

The ET618 includes a full-featured multimeter for various electrical measurements. Use the provided multimeter probes for these tests.

Figure 5: ET618 Multimeter Functions in Use

• ડીસી વોલ્યુમtage માપન: Connect probes to the circuit, select DCV mode.
• એસી વોલ્યુમtage માપન: Connect probes to the circuit, select ACV mode.
• ડીસી વર્તમાન માપન: Connect probes in series with the circuit, select DCA mode.
• એસી વર્તમાન માપન: Connect probes in series with the circuit, select ACA mode.
• પ્રતિકાર માપન: Connect probes across the component, select Ω mode.
• સાતત્ય પરીક્ષણ: Connect probes across the circuit; a beep indicates continuity.
• ડાયોડ ટેસ્ટ: Connect probes across the diode; the forward voltage ડ્રોપ દર્શાવવામાં આવશે.
• તાપમાન માપન: Connect the temperature probe to the device and place the sensor at the measurement point.

Always ensure the correct function is selected and probes are connected properly to avoid damage to the device or circuit.

6.5 ફ્લેશલાઇટનો ઉપયોગ કરવો

The ET618 main unit and receiver are equipped with flashlights. Press the dedicated flashlight button (if available) or refer to the device interface for activation in low-light conditions.

7. જાળવણી

7.1 સફાઈ

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.

7.2 બેટરી કેર

To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to approximately 50% and recharge every few months.

8. મુશ્કેલીનિવારણ

• ઉપકરણ ચાલુ થતું નથી: Ensure the battery is charged. Connect the recharging line and try again.
• અચોક્કસ વાંચન: Check cable connections. Ensure the correct mode is selected for the measurement. For multimeter functions, verify probe connections and component integrity.
• No signal during cable tracing: Ensure the main unit is in trace mode and the cable is properly connected. Adjust receiver sensitivity.
• LCD display is dim: The battery might be low. Recharge the device.

9. સ્પષ્ટીકરણો

The following table outlines the technical specifications for the ET618 model:

આકૃતિ 6: ટેકનિકલ સ્પષ્ટીકરણો સમાપ્તview

10. વોરંટી અને સપોર્ટ

This product comes with a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official KKnoon webસાઇટ