Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler Instruction Manual

પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of your Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler. This all-in-one (AIO) water cooling system is designed to deliver efficient thermal performance for your CPU, featuring a dual-chamber pump, pre-installed SickleFlow 120 Edge fans, and Addressable Gen 2 RGB lighting.

The MasterLiquid Atmos 360 is compatible with a wide range of Intel LGA (1700/1200/1151/1150/1155/1156) and AMD (AM5/AM4) sockets.

Image: The Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler, showcasing its radiator, three RGB fans, and illuminated pump head.

પેકેજ સામગ્રી

ઇન્સ્ટોલેશન શરૂ કરતા પહેલા, કૃપા કરીને ચકાસો કે બધા ઘટકો પેકેજમાં હાજર છે:

• 360mm Radiator with pre-installed SickleFlow 120 Edge Fans
• CPU Water Block/Pump Unit
• Mounting Hardware for Intel LGA 1700/1200/115x sockets
• Mounting Hardware for AMD AM5/AM4 sockets
• થર્મલ પેસ્ટ
• ARGB Gen 2 Controller (if included)
• Various Cables (PWM fan cables, ARGB cables)
• વપરાશકર્તા માર્ગદર્શિકા

છબી: એક વ્યાપક view of all included components for the MasterLiquid Atmos 360, including the radiator, fans, pump, mounting brackets, and accessories.

સેટઅપ અને ઇન્સ્ટોલેશન

Follow these steps carefully to install your liquid cooler. Refer to your motherboard and PC case manuals for specific guidance on component placement and cable routing.

1. Prepare the CPU Socket

• Identify your CPU socket type (Intel LGA or AMD AM).
• Install the appropriate backplate (for Intel) or retention clips (for AMD) as per the included hardware guide.
• Clean the CPU surface with isopropyl alcohol to remove any residue.

2. Apply Thermal Paste

• Apply a small, pea-sized amount of the included thermal paste to the center of your CPU's integrated heat spreader (IHS).
• Do not spread the paste manually; the pressure from the cold plate will distribute it evenly.

૩.૨. રેડિયેટર અને પંખા ઇન્સ્ટોલ કરો

• તમારા પીસી કેસમાં (સામાન્ય રીતે ઉપર અથવા આગળ) 360mm રેડિયેટર માટે શ્રેષ્ઠ માઉન્ટિંગ સ્થાન નક્કી કરો.
• Secure the radiator to the case using the provided screws. The SickleFlow Edge fans are pre-installed on the radiator for convenience.

4. Mount the Pump/Cold Plate

• Attach the correct mounting brackets to the pump unit for your CPU socket.
• Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes.
• Secure the pump unit with the appropriate screws, tightening them in a diagonal pattern until snug. Do not overtighten.

5. કેબલ્સ કનેક્ટ કરો

• Connect the pump's 3-pin power cable to an available CPU_FAN or AIO_PUMP header on your motherboard.
• Connect the PWM fan cables from the SickleFlow Edge fans to the CPU_FAN or other available fan headers on your motherboard. It is recommended to connect them to a single header using a splitter if necessary, to ensure synchronized fan speed control.
• Connect the ARGB cables from the pump and fans to an Addressable Gen 2 RGB header on your motherboard (5V-D-G) or to the included ARGB controller.

Image: The assembled MasterLiquid Atmos 360, showing the radiator, fans, and pump unit connected by tubing.

ઓપરેટિંગ સૂચનાઓ

પ્રારંભિક પાવર-ઓન

After installation, power on your system. The pump and fans should begin operating. Monitor your CPU temperatures using system monitoring software to ensure proper function.

આરજીબી લાઇટિંગ કંટ્રોલ

The MasterLiquid Atmos 360 features Addressable Gen 2 RGB lighting on both the pump and fans. You can control the lighting effects through several methods:

• મધરબોર્ડ સમન્વયન: If connected to a compatible ARGB motherboard header, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting.
• સમાવિષ્ટ ARGB નિયંત્રક: If an ARGB controller is included, use its physical buttons to cycle through pre-set lighting modes and colors.
• Cooler Master MasterCTRL/MasterPlus Software: Download and install Cooler Master's MasterCTRL or MasterPlus software for advanced customization of lighting effects and device performance.

છબી: વિગતવાર view of the MasterLiquid Atmos pump head, showcasing its unique design and customizable RGB illumination.

ચાહક ઝડપ નિયંત્રણ

The SickleFlow Edge fans are PWM (Pulse Width Modulation) controlled. Their speed can be managed via your motherboard's BIOS/UEFI settings or through motherboard-specific software. Adjust fan curves to balance cooling performance and noise levels according to your preferences.

જાળવણી

Regular maintenance helps ensure optimal performance and longevity of your liquid cooler.

• ધૂળ સફાઈ: રેડિયેટર ફિન્સ અને પંખાના બ્લેડમાંથી સમયાંતરે ધૂળને કોમ્પ્રેસ્ડ એર અથવા સોફ્ટ બ્રશનો ઉપયોગ કરીને સાફ કરો. સફાઈ કરતા પહેલા ખાતરી કરો કે સિસ્ટમ બંધ છે.
• દ્રશ્ય નિરીક્ષણ: Occasionally inspect the tubing and connections for any signs of leaks or damage. While AIO coolers are sealed systems, a quick visual check can prevent potential issues.
• સૉફ્ટવેર અપડેટ્સ: Keep your Cooler Master MasterCTRL/MasterPlus software and motherboard BIOS/UEFI updated to ensure compatibility and access to the latest features and performance optimizations.

મુશ્કેલીનિવારણ

If you encounter issues with your MasterLiquid Atmos 360, refer to the following common troubleshooting steps:

ઉચ્ચ CPU તાપમાન

• પંપ કનેક્શન તપાસો: Ensure the pump's power cable is securely connected to the correct motherboard header (CPU_FAN or AIO_PUMP) and receiving power.
• ચાહક કામગીરી ચકાસો: Confirm that all radiator fans are spinning. Check their connections to the motherboard or fan controller.
• થર્મલ પેસ્ટ: Ensure thermal paste was applied correctly and the cold plate has good contact with the CPU. Re-apply if necessary.
• એરફ્લો: Check your PC case's overall airflow. Ensure radiator fans are oriented correctly for intake or exhaust as desired.

RGB લાઇટિંગ કામ કરતું નથી

• ARGB કનેક્શન: Verify that the ARGB cables are correctly connected to a 5V-D-G header on your motherboard or the ARGB controller. Ensure it is not connected to a 12V RGB header, which can damage the LEDs.
• સૉફ્ટવેર: Check your motherboard's RGB software or Cooler Master's MasterCTRL/MasterPlus software for lighting settings. Ensure the lighting is enabled and configured.
• નિયંત્રક શક્તિ: If using an external ARGB controller, ensure it is receiving power (usually via SATA power connector).

અસામાન્ય પંપ અવાજ

• હવાના પરપોટા: New AIOs may have some air bubbles that can cause gurgling noises initially. These usually dissipate within a few hours of operation. Gently tilt your PC case to help move air bubbles to the radiator.
• માઉન્ટ કરવાનું: Ensure the pump is securely mounted and not vibrating against other components.

If problems persist, please contact Cooler Master customer support.

વિશિષ્ટતાઓ

વોરંટી માહિતી

The Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler comes with a 5 વર્ષની વોરંટી ખરીદીની તારીખથી. આ વોરંટી સામાન્ય ઉપયોગ હેઠળ સામગ્રી અને કારીગરીમાં ખામીઓને આવરી લે છે.

For warranty claims or detailed terms and conditions, please retain your proof of purchase and visit the official Cooler Master webસાઇટ અથવા તેમના ગ્રાહક સપોર્ટનો સંપર્ક કરો.

આધાર

For further assistance, technical support, or to download the latest software and drivers, please visit the official Cooler Master webસાઇટ:

www.coolemaster.com

You may also find helpful resources, FAQs, and community forums on their support pages.