SPI 31-040-9 ડિજિટલ પ્રોટ્રેક્ટર PRO3600 વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

The SPI 31-040-9 Digital Protractor PRO3600 is a revolutionary tool designed to provide immediate digital indications of level, plumb, and angles. It features a light, rigid, and ultra-precise platform, utilizing a state-of-the-art sensor and microprocessor circuit for accurate readings. This instrument is built for durability, precision, and reliability, making it an essential tool for various metalworking and laboratory applications.

મુખ્ય લક્ષણો:

• Floating zero provides zero selection anywhere within its 360° range.
• PRO 3600 features SPC output and excellent accuracy.
• Instant LCD Display with resolution of 0.1° up to +/-10°.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Supplied in a protective plastic case.
• Top plate has a V-groove for accurate registration on curved or cylindrical surfaces.

2. ઉત્પાદન ઓવરview

Familiarize yourself with the main components and controls of your SPI PRO3600 Digital Protractor.

3. સેટઅપ

3.1 બેટરી ઇન્સ્ટોલેશન

The SPI PRO3600 is battery powered. To install or replace batteries:

1. Locate the battery compartment cover, typically on the underside or side of the unit.
2. Open the cover using a small screwdriver or coin if necessary.
3. Insert the required batteries (refer to the battery type indicated inside the compartment, usually AAA or button cell) ensuring correct polarity (+/-).
4. બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.

3.2 પ્રારંભિક પાવર ચાલુ

બેટરી ઇન્સ્ટોલ કર્યા પછી, દબાવો ચાલુ/બંધ button to power on the device. The LCD display should illuminate and show a reading.

4. ઓપરેટિંગ સૂચનાઓ

4.1 પાવર ચાલુ/બંધ

• એકમ ચાલુ કરવા માટે ON, દબાવો ચાલુ/બંધ બટન
• એકમ ચાલુ કરવા માટે બંધ, દબાવો ચાલુ/બંધ ફરીથી બટન.
• The unit will automatically shut off after 6 minutes of non-use to conserve battery life.

4.2 Zeroing (ALT ZERO)

The floating zero feature allows you to set a reference point anywhere within the 360° range.

1. Place the unit on your chosen reference surface.
2. Wait approximately 5 seconds for the reading to stabilize.
3. દબાવો ALT ZERO button. The display will reset to 0.0°, establishing this as your new reference.
4. To return to the original absolute reference (factory zero), press the ALT ZERO ફરીથી બટન.

4.3 Holding a Reading

ડિસ્પ્લે પર વર્તમાન વાંચન સ્થિર કરવા માટે:

• દબાવો પકડી રાખો button. The displayed reading will be frozen.
• To unfreeze the display and resume live readings, press the પકડી રાખો ફરીથી બટન.

4.4 SPC Output

The PRO3600 features an SPC (Statistical Process Control) output port. This allows for data transfer to external devices for analysis. Refer to the manual for your specific SPC data collection system for connection and usage instructions.

4.5 Measuring Angles

Place the base of the protractor firmly on the surface you wish to measure. The digital display will show the angle relative to the last set zero point. For absolute measurements, ensure the unit is zeroed on a true horizontal surface.

4.6 Using the V-Groove

The top plate of the protractor features a V-groove. This design allows for accurate registration and measurement on curved or cylindrical surfaces, such as pipes or shafts. Simply align the V-groove with the cylindrical object to obtain a stable and accurate reading.

5. જાળવણી

5.1 સફાઈ

• નરમ, સૂકા કપડાથી યુનિટ સાફ કરો.
• હઠીલા ગંદકી માટે, થોડો ડીamp હળવા સાબુવાળા કપડાનો ઉપયોગ કરી શકાય છે, અને ત્યારબાદ તાત્કાલિક સૂકવી શકાય છે.
• Do not use abrasive cleaners, solvents, or immerse the unit in water.

5.2 સંગ્રહ

• Store the protractor in its supplied plastic case when not in use to protect it from dust, dirt, and physical damage.
• Store in a dry environment, away from extreme temperatures and direct sunlight.
• If storing for extended periods, remove the batteries to prevent leakage.

6. મુશ્કેલીનિવારણ

• યુનિટ ચાલુ થતું નથી: બેટરી ઇન્સ્ટોલેશન તપાસો અને ખાતરી કરો કે બેટરી ખાલી નથી થઈ ગઈ. જો જરૂરી હોય તો બદલો.
• અચોક્કસ વાંચન: Ensure the measurement surface is clean and stable. Perform an ALT ZERO calibration on a known true reference surface.
• Unit shuts off unexpectedly: The unit has an automatic shut-off feature after 6 minutes of non-use. This is normal operation. If it shuts off during active use, check battery levels.
• ડિસ્પ્લે ઝાંખું અથવા ઝબકતું છે: બેટરી ઓછી હોઈ શકે છે. તેને બદલો.

7. સ્પષ્ટીકરણો

8. વોરંટી અને સપોર્ટ

8.1 વોરંટી માહિતી

SPI measuring instruments are backed by an industry-leading 2-Year warranty, ensuring their durability, precision, and reliability. Please retain your proof of purchase for warranty claims.

8.2 ગ્રાહક સપોર્ટ

For technical assistance, warranty service, or inquiries regarding your SPI PRO3600 Digital Protractor, please contact SPI customer support through their official webસાઇટ અથવા રિટેલર જેની પાસેથી તમે ઉત્પાદન ખરીદ્યું છે.