ATOMSTACK A12 Pro

ATOMSTACK A12 Pro લેસર કોતરણી મશીન વપરાશકર્તા માર્ગદર્શિકા

બ્રાન્ડ: ATOMSTACK | મોડલ: A12 પ્રો

1. પરિચય

This manual provides detailed instructions for the safe and efficient operation of your ATOMSTACK A12 Pro Laser Engraving Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

સુરક્ષા ચેતવણીઓ:

  • Always wear UV-filtering eye protection when operating the laser engraver.
  • Ensure proper ventilation to dissipate fumes and smoke generated during engraving/cutting.
  • ઓપરેશન દરમિયાન મશીનને અડ્યા વિના છોડશો નહીં.
  • જ્વલનશીલ પદાર્થોને કાર્યક્ષેત્રથી દૂર રાખો.
  • Familiarize yourself with the emergency stop button location.

2. પેકેજ સામગ્રી

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં શામેલ છે:

ATOMSTACK A12 Pro Laser Engraving Machine and accessories

Figure 2.1: ATOMSTACK A12 Pro Laser Engraving Machine and included accessories.

  • ATOMSTACK A12 Pro Laser Engraving Machine (Unibody Frame)
  • લેસર હેડ
  • પાવર એડેપ્ટર (24V, 5A)
  • પાવર કેબલ
  • યુએસબી કેબલ (ટાઈપ-સી)
  • Goggles (UV-filtering eye protection)
  • Fixed Focus Lens
  • વપરાશકર્તા માર્ગદર્શિકા
  • Tools (H3 hexagon L-shaped wrench, M4 thumb screws)
  • ફ્લેશ ડ્રાઇવ
  • વાઇફાઇ એન્ટેના
  • Silicone Hose (air hose)
  • Wire Anchor
  • કેબલ Clamp
  • 100*30 lint free cloth
  • સ્લાઇડર
  • સ્વિચ કી

3. સેટઅપ માર્ગદર્શિકા

The ATOMSTACK A12 Pro features an unibody design for minimal assembly. Follow these steps to get started:

  1. અનબૉક્સિંગ: Carefully remove the machine and all accessories from the packaging. The machine is pre-calibrated and shipped as a single unit.
    Unboxing the ATOMSTACK A12 Pro

    Figure 3.1: The ATOMSTACK A12 Pro is ready to use right out of the box with its unibody design.

  2. Install the Slider: Attach the slider component to the designated rail on the machine. Secure it with the provided screws.
  3. Install the Laser Head: Mount the laser head onto the slider. Ensure it is firmly attached.
  4. Install the WiFi Antenna: Screw the WiFi antenna into its port on the machine's side.
  5. Install Tubing and X-axis Link Lines: Connect the tubing and X-axis link lines as shown in the diagram to ensure proper cable management and operation.
  6. પાવર અને યુએસબી કનેક્ટ કરો: Plug the power adapter into the machine and a power outlet. Connect the USB cable from the machine to your computer.
  7. પાવર ચાલુ: Insert the switch key and turn it to the ON position. The machine is now ready for software setup.

    8. Video 3.1: A detailed guide on how to install and set up the ATOMSTACK laser engraver.

4. ઓપરેટિંગ સૂચનાઓ

૩.૫ સોફ્ટવેર નિયંત્રણ

The ATOMSTACK A12 Pro supports multiple control methods:

  • ATOMSTACK PC Software: Exclusive software for simplified operation, ideal for beginners.
  • LightBurn & LaserGRBL: Traditional PC software for advanced users.
  • ATOMSTACK Mobile APP: Available on Android and Apple App Stores for WiFi control via smartphone.
Diverse control methods for ATOMSTACK A12 Pro

આકૃતિ 4.1: ઓવરview of the various software and app control options for the laser engraver.

૫.૨ કોતરણી પ્રક્રિયા

  1. સામગ્રી પ્લેસમેન્ટ: Place your material flat on the engraving bed.
  2. ફોકસ એડજસ્ટમેન્ટ: Use the fixed-focus design for rapid and precise focusing in approximately 10 seconds.
  3. Cross Positioning: Utilize the newly added cross laser positioning feature for clear visibility of the laser's location, ensuring perfect alignment for engraving and easy horizontal adjustment.
    4. Cross positioning system for precise engraving

    Figure 4.2: The cross positioning system helps align objects and lock to edges for precise horizontal carving.

  4. સૉફ્ટવેર સેટિંગ્સ: Adjust engraving parameters (speed, power, passes) in your chosen software based on the material.
  5. કોતરણી શરૂ કરો: Initiate the engraving process from the software.

5. Features & Capabilities

  • યુનિબોડી ડિઝાઇન: Sturdy all-aluminum unibody design, installation-free and pre-calibrated.
  • High Speed & Precision: New dual-axis linear guide rail structure and high-speed motherboard allow engraving speeds up to 600mm/s, 3-6 times faster than traditional frame machines. Accuracy within 0.004 inches.
    • Amazing working speed of ATOMSTACK A12 Pro

    Figure 5.1: Comparison showing the significantly faster engraving speed of the A12 Pro.

  • શક્તિશાળી લેસર: 12000mW diode laser (Laser Class 4) with 50W machine power and a 0.05*0.06mm ultra-fine laser spot focus.
  • Thicker Cuts: Can cut through 8mm wood, 5mm black acrylic, and 0.02mm stainless steel in a single pass.
    • Enhanced laser cutting capabilities

    Figure 5.2: Demonstrates the maximum cutting thickness for various materials with the A12 Pro.

  • Diverse Material Compatibility: Engraves and cuts a wide range of materials including wood, acrylic, metal, glass, ceramics, leather, paper, cardboard, and more.
    • Diverse materials compatible with ATOMSTACK A12 Pro

    આકૃતિ 5.3: ઉદાamples of various materials that can be engraved or cut by the machine.

  • Automatic Power Failure Recovery: Memorizes engraving position and swiftly resumes from the paused point, ensuring uninterrupted production and material saving.
  • ઉન્નત સુરક્ષા: Equipped with 4-way limit switches, UV-filtering eye protection, a tilt detector with a 15-degree alarm, and an emergency stop button.

6. જાળવણી

  • લેન્સ સફાઈ: Regularly clean the laser lens with the provided lint-free cloth to maintain optimal performance and prevent residue buildup.
  • Rail Lubrication: Periodically apply a small amount of lubricant to the guide rails to ensure smooth movement of the laser head.
  • કચરો દૂર: Keep the engraving bed and surrounding area free of debris and dust. Use an air compressor or brush to clear away small particles.
  • ફર્મવેર અપડેટ્સ: Check the official ATOMSTACK website periodically for firmware updates to ensure your machine has the latest features and bug fixes.

7. મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણઉકેલ
મશીન ચાલુ નથીPower cable loose; Emergency stop engaged; Key not turned.Check power connections; Disengage emergency stop; Turn key to ON.
Laser not firing/weak outputLens dirty; Incorrect focus; Low power setting in software.Clean laser lens; Adjust focus; Increase power setting.
Engraving is distorted/inaccurateLoose belts/rails; Material shifting; Incorrect software settings.Check and tighten belts/rails; Secure material; Verify software settings.
સોફ્ટવેર મશીન સાથે કનેક્ટ થઈ રહ્યું નથીUSB cable issue; Driver not installed; Incorrect COM port.Try different USB port/cable; Install drivers; Select correct COM port in software.

8. સ્પષ્ટીકરણો

  • ઉત્પાદન પરિમાણો: 23.22 x 23.22 x 7.08 ઇંચ
  • વસ્તુનું વજન: 18.74 પાઉન્ડ
  • લેસર આઉટપુટ પાવર: ૧૦,૦૦૦ મેગાવોટ (૧૦ વોટ)
  • મશીન પાવર: 50W
  • Laser Spot Size: 0.05*0.06 મીમી
  • કોતરણી ઝડપ: 600mm/s સુધી
  • ચોકસાઈ: Within 0.004 inches
  • કનેક્ટિવિટી: USB, WiFi (via Mobile APP)
  • સપોર્ટેડ સોફ્ટવેર: ATOMSTACK PC Software, LightBurn, LaserGRBL
  • ઉત્પાદક: શેનઝેન એટમસ્ટેક ટેક્નોલોજીસ કો., લિ.
  • મૂળ દેશ: ચીન

9. વોરંટી અને સપોર્ટ

Your ATOMSTACK A12 Pro Laser Engraving Machine comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official ATOMSTACK webસાઇટ

Our professional technical and support teams are available 24/7 to answer any questions or concerns you may have.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.