YELLOW JACKET 2.5 Ton Trolley Jack Instruction Manual

પરિચય

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your YELLOW JACKET 2.5 Ton Trolley Jack. Please read this manual thoroughly before using the jack and retain it for future reference.

The YELLOW JACKET 2.5 Ton Trolley Jack is a hydraulic low-profile floor jack designed for lifting vehicles with a maximum capacity of 5500 lbs (2.5 tons). It features a single piston lift pump for quick lifting, durable heavy-duty steel construction, and a low minimum lifting height of 3-1/2 inches, extending to a maximum of 14-1/8 inches. It is equipped with a safety protection device and meets ANSI/ASME PASE safety standards.

સલામતી માહિતી

WARNING: Failure to follow these safety instructions may result in property damage, personal injury, or death.

• Always read and understand the entire manual before using this product.
• Do not exceed the rated capacity of 2.5 tons (5500 lbs).
• Use this jack only on a hard, level surface.
• Immediately after lifting the vehicle, support it with appropriate jack stands. Do not work under a vehicle supported only by a jack.
• Ensure the vehicle's parking brake is engaged and wheels are chocked before lifting.
• Center the load on the jack saddle. Off-center loads can cause the jack to tip.
• Do not use the jack for purposes other than lifting vehicles.
• Keep hands and feet clear of moving parts and the area under the vehicle.
• ધીમે ધીમે અને કાળજીપૂર્વક ભાર ઓછો કરો.
• સલામતી ચશ્મા અને મોજા જેવા યોગ્ય વ્યક્તિગત રક્ષણાત્મક ઉપકરણો (PPE) પહેરો.
• Do not modify the jack or use it with unauthorized attachments.
• બાળકો અને દર્શકોને કાર્યક્ષેત્રથી દૂર રાખો.

ઉત્પાદન ઓવરview

The YELLOW JACKET 2.5 Ton Trolley Jack is designed for ease of use and durability. Familiarize yourself with its components:

Figure 1: Key Components of the Trolley Jack

• 1. Carrying Handle: સરળ પરિવહન માટે.
• 2. 360° Rotating Handle: Provides leverage for pumping and controls the release valve.
• 3. Steel Front Casters: For stability and movement.
• 4. Over-load Protection: Safety mechanism to prevent lifting beyond capacity.
• 5. Long Handle: Detachable handle for pumping and maneuvering.

વધારાના લક્ષણોમાં શામેલ છે:

• લો પ્રોfile ડિઝાઇન: Minimum height of 3-1/2 inches allows access under low-clearance vehicles.
• High Lift Range: Maximum lift height of 14-1/8 inches.
• ટકાઉ બાંધકામ: Made from heavy-duty steel for long-term reliability.
• દાવપેચ: Equipped with two steel front casters and two 360-degree rear casters.

Figure 2: Jack Lifting Range

Figure 3: All Steel Construction

સેટઅપ

1. અનપેકીંગ: Carefully remove the jack and all components from the packaging. Inspect for any shipping damage.
2. હેન્ડલ એસેમ્બલી: Insert the handle into the handle socket on the jack. Ensure it is securely seated. The handle also serves as the release valve control.
3. Bleeding the Hydraulic System (Initial Use):
   • With the jack fully lowered, remove the oil filler plug (if present, refer to specific model diagram).
   • Pump the handle rapidly 10-15 times without a load to remove any air that may be trapped in the hydraulic system.
   • ઓઇલ ફિલર પ્લગ બદલો.
4. ટેસ્ટ ઓપરેશન: Before first use, test the jack without a load. Pump the handle to raise the saddle to its maximum height, then slowly turn the handle counter-clockwise to lower it. Ensure smooth operation.

ઓપરેટિંગ સૂચનાઓ

Follow these steps for safe and effective vehicle lifting:

1. વાહન તૈયાર કરો:
   • Park the vehicle on a hard, level surface.
   • પાર્કિંગ બ્રેક લગાવો.
   • Place wheel chocks on the wheels that will remain on the ground.
   • If lifting the front, chock the rear wheels. If lifting the rear, chock the front wheels.
2. જેકને સ્થાન આપો:
   • Locate the vehicle's manufacturer-recommended lifting points. Refer to your vehicle's owner's manual.
   • Roll the jack under the vehicle, ensuring the saddle is directly under the lifting point.
   • Ensure the jack is positioned so that the handle can be operated freely.
3. વાહન ઉપાડો:
   • Turn the handle clockwise until it is firmly closed. This closes the release valve.
   • Pump the handle up and down to raise the jack saddle. Continue pumping until the vehicle is lifted to the desired height.
   • મહત્વપૂર્ણ: Do not lift the vehicle higher than necessary.
4. Secure with Jack Stands:
   • Once the vehicle is lifted, immediately place appropriately rated jack stands under the vehicle's designated support points.
   • Slowly lower the vehicle onto the jack stands by gently turning the handle counter-clockwise.
   • Ensure the vehicle is stable on the jack stands before performing any work.
5. વાહન નીચે કરો:
   • Raise the vehicle slightly off the jack stands using the trolley jack.
   • જેક સ્ટેન્ડ દૂર કરો.
   • Slowly and carefully turn the handle counter-clockwise to open the release valve and lower the vehicle completely to the ground.
   • Once fully lowered, remove the jack from under the vehicle.

Figure 4: How to Use Instructions

સૂચનાત્મક વિડિઓઝ

જાળવણી

• લુબ્રિકેશન: Periodically lubricate all moving parts with light grease or oil.
• હાઇડ્રોલિક પ્રવાહી: Check the hydraulic fluid level every three months. To check, lower the jack completely, remove the oil filler plug (if present, refer to specific model diagram), and ensure the fluid is just below the filler hole. Use only high-quality hydraulic jack oil.
• સફાઈ: Keep the jack clean from dirt, grease, and debris. This prevents contamination of the hydraulic system and ensures smooth operation.
• સંગ્રહ: Store the jack in a clean, dry place with the ram fully retracted (jack fully lowered) to prevent corrosion and extend seal life. The included carrying case provides convenient storage.

Figure 5: Jack in Carrying Case for Storage

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

વોરંટી

This YELLOW JACKET 2.5 Ton Trolley Jack includes a limited 1-year manufacturer warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or contact YELLOW JACKET customer support.

Optional protection plans may be available for purchase separately, offering extended coverage beyond the manufacturer's warranty.

આધાર

For technical assistance, parts, or warranty claims, please contact YELLOW JACKET customer support. Refer to the product packaging or the official YELLOW JACKET webસૌથી અદ્યતન સંપર્ક માહિતી માટે સાઇટ.

When contacting support, please have your product model number (ASS825010CS) and purchase date available.