DIGITUS DS-55328 Wireless HDMI KVM Extender/Splitter User Manual

1. પરિચય

The DIGITUS DS-55328 Wireless HDMI KVM Extender Kit is designed to transmit HDMI video and audio signals wirelessly. This kit supports UHD 4K/30Hz resolution over distances up to 150 meters in an unobstructed environment. It consists of a sending unit (Transmitter) and a receiving unit (Receiver).

Key features include KVM functionality, allowing control of the signal source from the receiver unit using a connected mouse and keyboard. An HDMI Loop-Out port on the sending unit enables a local monitor connection for monitoring the output. The system supports point-to-multipoint connections, allowing one transmitter to connect with up to four receivers (additional receivers, model DS-55329, are sold separately).

• Wireless transmission of HDMI signals up to 150 meters (with free view).
• Point-to-multipoint connection: 1 sender (source) + up to 4 receivers (output devices).
• Supports wireless transmission of AV signals with resolutions up to 4K UHD (2160p/30Hz).
• HDMI 2.0 અને HDCP 2.2 સુસંગત.
• KVM functionality for mouse/keyboard control at the receiver.
• HDMI Loop-Out on the transmitter for local monitoring.
• Easy plug & play operation, no drivers or software required.
• Touch Screen Back Control compatible via USB connection on receiver.
• Power via USB-C connection and included power supply.
• 128-bit AES encoding and WPA2 protocol for secure transmission.

2. પેકેજ સામગ્રી

Please verify that all items listed below are included in your package. If any items are missing or damaged, contact your retailer.

• 1x DIGITUS DS-55328 Transmitter Unit
• 1x DIGITUS DS-55328 Receiver Unit
• 2x Power Adapters (USB-C)
• 2x HDMI કેબલ્સ
• 2x USB-C Power Cables
• 1x IR Link Cable
• વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

છબી 2.1: Contents of the DS-55328 package, including the transmitter, receiver, power adapters, HDMI cables, USB-C cables, and an IR link cable.

3. ઉત્પાદન ઓવરview

Familiarize yourself with the ports and indicators on both the Transmitter and Receiver units.

3.1. Transmitter Unit (TX)

• HDMI IN: Connects to your HDMI source device (e.g., PC, laptop, media player).
• HDMI OUT (Loop-Out): Connects to a local monitor for direct display of the source signal.
• યુએસબી-સી: પાવર ઇનપુટ બંદર.
• IR Link: Connects to the IR blaster cable for controlling the source device.
• બટન: For pairing or mode selection.
• વીજળીનું બટન: એકમ ચાલુ અથવા બંધ કરવા માટે.

3.2. Receiver Unit (RX)

• HDMI આઉટ: Connects to your display device (e.g., TV, monitor, projector).
• યુએસબી પોર્ટ્સ: Connects to a keyboard, mouse, or touch screen panel for KVM functionality.
• યુએસબી-સી: પાવર ઇનપુટ બંદર.
• સ્થિતિ પ્રદર્શન: Indicates connection status and other operational information.
• બટન: For pairing or mode selection.
• વીજળીનું બટન: એકમ ચાલુ અથવા બંધ કરવા માટે.

છબી 3.1: Detailed diagram showing the various ports and features on both the Transmitter and Receiver units of the DS-55328.

છબી 3.2: આગળ view of the DS-55328 Transmitter and Receiver units, highlighting their compact design.

છબી 3.3: પાછળ view of the DS-55328 Transmitter and Receiver units, showing all input and output ports.

4. સેટઅપ સૂચનાઓ

Follow these steps to set up your Wireless HDMI KVM Extender Kit.

૬.૧. પોઈન્ટ-ટુ-પોઈન્ટ કનેક્શન

1. સ્ત્રોતને ટ્રાન્સમીટર સાથે જોડો: Use an HDMI cable to connect your source device (e.g., PC, laptop) to the એચડીએમઆઇ ઇન port on the DS-55328 Transmitter unit.
2. Connect Local Monitor (Optional): If you wish to monitor the source locally, connect an HDMI cable from the HDMI OUT (Loop-Out) port on the Transmitter to your local monitor.
3. Power the Transmitter: Connect one of the provided USB-C power cables to the યુએસબી-સી port on the Transmitter, and then plug the power adapter into an electrical outlet.
4. Connect Receiver to Display: Use an HDMI cable to connect your display device (e.g., TV, monitor) to the HDMI આઉટ port on the DS-55328 Receiver unit.
5. Connect KVM Peripherals (Optional): For KVM functionality, connect your USB keyboard and mouse to the યુએસબી પોર્ટ્સ on the Receiver unit.
6. રીસીવરને પાવર આપો: Connect the second USB-C power cable to the યુએસબી-સી port on the Receiver, and then plug the power adapter into an electrical outlet.
7. પાવર ચાલુ: Turn on both the Transmitter and Receiver units using their respective power switches. Ensure your source device and display are also powered on.
8. જોડી બનાવવી (જો જરૂરી હોય તો): The units should automatically pair. If not, refer to the operating instructions for manual pairing.

છબી 4.1: Diagram illustrating a typical point-to-point connection setup for the DS-55328, showing connections from a source to the transmitter and from the receiver to a display with KVM peripherals.

૬.૨. પોઈન્ટ-ટુ-મલ્ટિપોઈન્ટ કનેક્શન

The DS-55328 supports connecting one Transmitter to up to four Receiver units (DS-55329, sold separately).

1. Follow steps 1-3 from the Point-to-Point Connection for setting up the Transmitter unit.
2. For each additional Receiver unit (DS-55329), follow steps 4-6 from the Point-to-Point Connection.
3. Ensure all Transmitter and Receiver units are powered on. The Transmitter will broadcast the signal to all paired Receivers.

છબી 4.2: Diagram showing a point-to-multipoint connection setup, where one DS-55328 Transmitter sends signals to multiple DS-55329 Receiver units.

5. ઓપરેટિંગ સૂચનાઓ

5.1. પાવર ચાલુ/બંધ

Use the power switch on each unit to turn it on or off. Ensure both Transmitter and Receiver units are powered on for operation.

5.2. KVM કાર્યક્ષમતા

Once a USB keyboard and mouse are connected to the Receiver's USB ports, you can control the source device connected to the Transmitter. This allows for remote operation of your computer or other KVM-compatible source.

5.3. IR નિયંત્રણ

Connect the IR Link cable to the IR port on the Transmitter. Position the IR blaster head near the IR receiver of your source device. This enables you to use the source device's remote control from the location of the Receiver unit.

5.4. સ્થિતિ સૂચકાંકો

The Status Display on the Receiver unit provides visual feedback on the connection status. Refer to the device's LED indicators for specific states (e.g., power, signal, connection status).

5.5. જોડી બનાવવી

In most cases, the Transmitter and Receiver units will automatically pair upon power-up. If pairing does not occur, press the 'Button' on both the Transmitter and Receiver units simultaneously for a few seconds until the status indicators confirm a successful connection.

6. જાળવણી

To ensure optimal performance and longevity of your DIGITUS DS-55328, follow these maintenance guidelines:

• સફાઈ: યુનિટ્સ સાફ કરવા માટે નરમ, સૂકા કપડાનો ઉપયોગ કરો. પ્રવાહી અથવા એરોસોલ ક્લીનર્સનો ઉપયોગ કરશો નહીં, કારણ કે તે સીને નુકસાન પહોંચાડી શકે છે.asing અથવા આંતરિક ઘટકો.
• પર્યાવરણ: Operate the device in a well-ventilated area. Avoid exposing the units to extreme temperatures, high humidity, or direct sunlight.
• સંગ્રહ: When not in use for extended periods, store the units in a cool, dry place, away from dust and moisture.
• કેબલ્સ: Ensure all cables are connected securely and are not bent or crimped, which could lead to signal loss or damage.

7. મુશ્કેલીનિવારણ

If you encounter issues with your DS-55328, refer to the following troubleshooting steps:

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For warranty information, please refer to the documentation provided with your purchase or visit the official DIGITUS website. Technical support may be available through your retailer or the manufacturer's support channels.

કૃપા કરીને વોરંટી દાવા માટે તમારી ખરીદીનો પુરાવો જાળવી રાખો.