Digitek DSG-010PRO 3-Axis Handheld Gimbal Stabilizer User Manual

1. પરિચય

Thank you for choosing the Digitek DSG-010PRO 3-Axis Handheld Gimbal Stabilizer. This device is designed to provide smooth, stable footage for your smartphone videos and photos, eliminating shakes and jitters. Please read this manual carefully before use to ensure proper operation and to maximize the performance of your gimbal.

2. પેકેજ સામગ્રી

કૃપા કરીને ખાતરી કરો કે નીચેની બધી વસ્તુઓ તમારા પેકેજમાં શામેલ છે:

• Digitek DSG-010PRO Gimbal Stabilizer
• યુએસબી ચાર્જિંગ કેબલ
• મીની ત્રપાઈ
• વપરાશકર્તા માર્ગદર્શિકા

3. ઉત્પાદન ઓવરview

Familiarize yourself with the components of your Digitek DSG-010PRO gimbal:

Image: Diagram illustrating the various parts of the Digitek DSG-010PRO gimbal, including the phone clamp, pan axis, tilt axis, roll axis, joystick, power button, mode button, and charging port.

1. સ્માર્ટફોન Clamp: Secures your smartphone to the gimbal.
2. Tilt Axis Motor: Controls the up and down movement of the phone.
3. Roll Axis Motor: Controls the horizontal rotation of the phone.
4. Pan Axis Motor: Controls the left and right rotation of the gimbal handle.
5. જોયસ્ટિક: For manual control of gimbal direction.
6. પાવર બટન: Long press to power on/off. Single press for battery status.
7. મોડ બટન: Switches between different stabilization modes.
8. શટર બટન: Controls photo/video capture via Bluetooth connection.
9. ચાર્જિંગ પોર્ટ (USB-C): For charging the gimbal battery.
10. ઝૂમ સ્લાઇડર: Controls digital zoom in the connected app.

4. ગિમ્બલ ચાર્જ કરવું

Before first use, fully charge the gimbal battery.

• Connect the provided USB charging cable to the gimbal's USB-C charging port.
• કેબલના બીજા છેડાને USB પાવર એડેપ્ટર (શામેલ નથી) અથવા કમ્પ્યુટર USB પોર્ટ સાથે કનેક્ટ કરો.
• The indicator light will show charging status. It will turn solid when fully charged.
• ચાર્જ થવામાં સામાન્ય રીતે લગભગ 2-3 કલાક લાગે છે.

5. સેટઅપ

5.1 Mounting the Smartphone

1. Extend the smartphone clamp હથિયારો
2. તમારા સ્માર્ટફોનને કાળજીપૂર્વક કચરાપેટીમાં મૂકો.amp, ખાતરી કરો કે તે કેન્દ્રિત અને સુરક્ષિત છે.
3. Ensure the phone's camera is not obstructed by the clamp.

Image: A smartphone being carefully inserted into the spring-loaded clamp of the gimbal, ensuring a secure and centered fit.

૩.૨ ગિમ્બલને સંતુલિત કરવું

Proper balancing is crucial for optimal performance and battery life. Balance the gimbal પહેલાં તેને ચાલુ કરી રહ્યું છે.

1. After mounting your smartphone, observe its position. If it tilts to one side, adjust the phone's position within the clamp until it remains level when held loosely.
2. If your phone is too heavy on one side, you may need to slide it slightly in the opposite direction within the clamp.
3. The goal is for the phone to stay horizontal and stable without the gimbal being powered on.

Image: A hand adjusting the position of a smartphone within the gimbal clamp to achieve a balanced, level state before powering on the device.

6. ઓપરેટિંગ સૂચનાઓ

6.1 પાવર ચાલુ/બંધ

• પાવર ચાલુ: Long press the Power Button for 3 seconds until the indicator light turns on.
• પાવર બંધ: Long press the Power Button for 3 seconds until the indicator light turns off.
• બેટરી તપાસ: Single press the Power Button to see the battery level indicated by the lights.

૬.૧.૩ મોડ સ્વિચિંગ

Press the Mode Button to cycle through different stabilization modes:

• પાન ફોલો મોડ (PF): The tilt and roll axes are locked, and the pan axis follows the handle's movement.
• લોક મોડ (L): All three axes are locked, and the camera stays fixed in one direction.
• Full Follow Mode (FF): All three axes follow the handle's movement, providing dynamic shots.

૨.6.3 જોયસ્ટિક નિયંત્રણ

Use the joystick to manually adjust the camera's direction:

• Push up/down to control the tilt axis.
• Push left/right to control the pan axis.

6.4 શટર બટન

After connecting via Bluetooth, press the Shutter Button to:

• Single press: Take a photo.
• Long press: Start/stop video recording.

6.5 Connecting to the Digitek App (Bluetooth)

1. Download the official Digitek gimbal app from your smartphone's app store.
2. Ensure your gimbal is powered on.
3. તમારા સ્માર્ટફોન પર બ્લૂટૂથ સક્ષમ કરો.
4. Open the Digitek app and search for available devices.
5. Select "DSG-010PRO" from the list to connect.
6. Once connected, you can control various functions, including zoom, focus, and advanced shooting modes, directly from the app.

7. જાળવણી

• Keep the gimbal clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the gimbal to water or extreme temperatures.
• Store the gimbal in a cool, dry place, preferably in its original packaging or a protective case.
• Charge the battery at least once every three months if not in regular use to maintain battery health.

8. મુશ્કેલીનિવારણ

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

The Digitek DSG-010PRO Gimbal Stabilizer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact Digitek customer service through their official webસાઇટ અથવા તમારા વોરંટી કાર્ડ પર આપેલી સંપર્ક માહિતી.