ગેમ 7011-E સેન્ડ ફિલ્ટરેશન સિસ્ટમ સૂચના માર્ગદર્શિકા

પરિચય

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your GAME 7011-E Sand Filtration System. This system is designed for above-ground pools up to 25,000 gallons, featuring a 16-inch filter tank, a 3/4 HP pump, and a digital timer for automated filtration cycles. Please read all instructions carefully before assembly and use.

સલામતી માહિતી

ચેતવણી: આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ગંભીર ઈજા અથવા મૃત્યુમાં પરિણમી શકે છે.

• કોઈપણ સેવા કે જાળવણી કરતા પહેલા હંમેશા પંપનો પાવર ડિસ્કનેક્ટ કરો.
• Ensure the electrical supply is protected by a Ground Fault Circuit Interrupter (GFCI).
• જો પાવર કોર્ડ અથવા પ્લગ ક્ષતિગ્રસ્ત હોય તો પંપ ચલાવશો નહીં.
• Keep children away from the filtration system during operation.
• The system must be installed on a solid, level surface.
• પાવર કોર્ડને દફનાવશો નહીં.
• Consult a qualified electrician for electrical connections if unsure.

પેકેજ સામગ્રી

એસેમ્બલી શરૂ કરતા પહેલા ખાતરી કરો કે નીચે સૂચિબદ્ધ બધા ઘટકો હાજર છે અને તેમને કોઈ નુકસાન થયું નથી.

Image: A visual representation of all components included in the package, such as the six-way valve, sand filter tank, pump, hoses, and hardware.

• છ-માર્ગી વાલ્વ
• 16-inch Sand Filter Tank
• 16-inch Sand Filter Tank Base
• 16-inch Manifold Tube
• Manifold Lateral Assembly
• ફ્લેંજ Clamp
• 0.75 HP Pump & Motor Assembly & Base
• રેતી ઢાલ
• Fasteners, Hardware & Gaskets
• પ્રેશર ગેજ
• Sand Filter Tank Drain Plug
• 20", 40" & 120" Hoses
• સ્ટ્રેનર બાસ્કેટ
• Strainer Basket Lid
• Motor Drain Plug
• દૃષ્ટિ કાચ

એસેમ્બલી અને ઇન્સ્ટોલેશન

Follow these steps for proper assembly and installation of your sand filtration system.

Image: The complete GAME 7011-E Sand Filtration System, including the sand filter tank, pump, and multi-port valve.

1. સિસ્ટમની સ્થિતિ: Place the filter system on a firm, level surface, preferably concrete, at least 2 feet from the pool. Ensure the location allows for proper drainage when backwashing.
2. Assembling the Tank Base: Secure the sand filter tank onto its base.
3. Installing Lateral Assembly: Insert the manifold lateral assembly into the bottom of the filter tank. Ensure laterals are spread evenly.
4. Adding Filter Sand: Carefully pour approximately 120 pounds of #20 silica sand (0.45-0.55mm) into the filter tank. Ensure the manifold tube remains centered during this process. Fill the tank about two-thirds full.
5. Attaching the Six-Way Valve: Place the six-way valve onto the top of the filter tank, aligning the ports. Secure it with the flange clamp, ensuring a tight seal. Use a #3 Phillips screwdriver for the clamp screws and ensure washers are used to prevent damage to the plastic flange. Align the clamp openings with the ridges on the valve.
6. પંપને જોડવું: Attach the pump to the six-way valve using the provided hoses and fittings. Ensure all connections are tight to prevent leaks. The system uses 1.5-inch inlet and outlet connections.
7. પૂલ સાથે કનેક્ટ થઈ રહ્યું છે: Connect the pool's skimmer line to the pump's inlet and the pool's return line to the six-way valve's 'RETURN' port using the provided hoses.
8. Installing Pressure Gauge: Screw the pressure gauge into the designated port on the six-way valve.
9. Filling the Pump with Water: Before starting, remove the strainer basket lid and fill the pump with water to prime it. Replace the lid securely.
10. ઇલેક્ટ્રિકલ કનેક્શન: Plug the 7.9-meter power cord into a GFCI-protected outlet.

Image: The compact sand filtration system positioned beside an above-ground pool, demonstrating its suitable size for various setups.

ઓપરેશન

The GAME 7011-E Sand Filtration System features a 6-way valve and a digital timer for controlling filtration cycles.

છબી: એક ઓવરview highlighting the pressure gauge for monitoring system performance, the 6-way valve for controlling water flow, and the strainer basket for pre-filtering debris.

6-Way Valve Functions

Always turn off the pump before changing the valve position to prevent damage.

• ફિલ્ટર: Normal filtering mode. Water flows through the sand, trapping debris, and returns to the pool.
• બેકવોશ: Cleans the filter sand by reversing water flow, sending dirty water to waste. Use when pressure gauge reads 8-10 PSI above starting pressure.
• કોગળા: Used after backwashing to flush out any remaining dirty water from the valve and sand bed to waste before returning to FILTER mode.
• કચરો/ડ્રેઇન: Bypasses the filter, sending water directly to waste. Useful for lowering pool water level or vacuuming heavy debris directly to waste.
• પુનઃપ્રક્રિયા: Bypasses the filter, circulating water directly back to the pool. Useful for mixing chemicals without filtering.
• બંધ: Shuts off all flow to the filter and pump. Use for servicing the pump or filter.

ડિજિટલ ટાઈમર .પરેશન

Image: Close-up of the integrated digital timer, allowing for programmable filtration cycles.

The digital timer allows for automated control of filtration cycles. Refer to the timer's specific instructions for setting daily run times. Ensure the timer is set to provide adequate filtration for your pool size and usage, typically 8-12 hours per day.

જાળવણી

Regular maintenance ensures optimal performance and longevity of your filtration system.

• બેકવોશિંગ: Perform backwashing when the pressure gauge reads 8-10 PSI above its clean starting pressure, or when water flow to the pool decreases significantly.
• રિન્સિંગ: Always rinse for 30-60 seconds after backwashing to settle the sand and prevent dirty water from returning to the pool.
• સ્ટ્રેનર બાસ્કેટ સફાઈ: Regularly inspect and clean the pump's strainer basket. Turn off the pump, close necessary valves, remove the lid, empty debris, and replace.
• રેતી બદલી: Filter sand typically needs to be replaced every 3-5 years, depending on usage and water chemistry.
• વિન્ટરાઇઝેશન: In cold climates, drain all water from the pump and filter tank to prevent freezing damage. Store the pump and valve indoors if possible.

મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your sand filtration system.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

The GAME 7011-E Sand Filtration System comes with a 2-વર્ષ ઉત્પાદક વોરંટી. For warranty claims, technical assistance, or replacement parts, please contact GAME customer support. Refer to the product packaging or the official GAME webવર્તમાન સંપર્ક માહિતી માટે સાઇટ.

Image: The sand filtration system integrated with a GAME SCG (Saltwater Chlorinator Generator) system, illustrating compatibility.