mGYDY 36V 48V 750W KT 25A Electric Bicycle Controller Kit Instruction Manual

પરિચય

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your mGYDY 36V 48V 750W KT 25A Electric Bicycle Controller Kit. Please read this manual thoroughly before use to ensure proper function and safety.

પેકેજ સામગ્રી

નીચેની વસ્તુઓ તમારા પેકેજમાં સમાવવામાં આવેલ છે:

• 1 x 25A Electric Motor Controller
• 1 x LCD5 Display
• 1 x TT009 Thumb Throttle
• 1 x 1T4 Cable

આકૃતિ 1: ઓવરview of the mGYDY Electric Bicycle Controller Kit components.

વિશિષ્ટતાઓ

Figure 2: Controller dimensions and basic specifications.

Figure 3: LCD5 Display dimensions and specifications.

Figure 4: TT009 Thumb Throttle specifications.

સેટઅપ અને ઇન્સ્ટોલેશન

Proper installation is crucial for the safe and efficient operation of your e-bike kit. Ensure all connections are secure and waterproof where applicable.

Controller Wiring Instructions

Connect the corresponding line interfaces as described below to enable the kit's functions. It is essential to use this kit with a brushless motor and it is only compatible with KT series instrument products.

1. Black Long Wire: Connect to the Motor Wire.
2. Red and Black Single Big Wire: Connect as the Power Cord.
3. Black Long Wire (Fine Hole): Connect to the One for Four/One for Five (9 Cores) cable.
4. Black Line and Red Head: Connect to the Light Line.
5. Black Wire and Yellow Head: Connect to the Power Assist Sensor Wire.

Figure 5: Controller wiring diagram showing various connections.

Figure 6: 1T4 Cable product connector details.

Display and Throttle Installation

The LCD5 display features an open design for easy installation on 22mm diameter handlebars, eliminating the need to remove the bike handlebars. The 1T4 cable connects the display, thumb throttle, and two brake levers to the controller.

Figure 7: LCD5 Display easy installation feature.

ઓપરેટિંગ સૂચનાઓ

The LCD5 display provides various user parameter setting functions to customize your e-bike's performance.

LCD5 Display Functions

The display shows speed, PAS level, battery level, total mileage, single mileage, light indication, single trip time, and error codes. Refer to the diagram below for button functions and display indicators.

Figure 8: KT-LCD5 e-Bike Display User Manual - Functions and Display.

પરિમાણ સેટિંગ્સ

The display allows setting and adjusting motor parameters, speed measurement parameters, speed limit parameters, power parameters, power auxiliary control parameters, minimum controller voltage, and maximum current parameters. To enter parameter setting mode, press and hold the '+' and '-' buttons simultaneously. Use the '+' and '-' buttons to navigate and adjust values. Press the 'M' button to save and exit.

• P01: Backlight brightness (1-3 levels)
• P02: Change metric (0: Km, 1: Mile)
• P03: બેટરી વોલ્યુમtage setting (24V/36V/48V/60V/72V, default 36V). Adjust 36V-60V voltage.
• P04: Hibernate mode time (1-60 minutes, 0: never enter this mode)
• P05: Total assist levels (0-5 levels)
• P06: Wheel size (inch)
• P07: Speed calculation (number of magnets for speed calculation, range: 1-255)
• P08: Speed limit range (0-100km/h)
• P09: Zero speed start (0: zero start, 1: non-zero start)
• P10: ડ્રાઇવિંગ મોડ પસંદગી
• P11: Assist sensitivity
• P12: Assist starting power
• P13: Assist disc type
• P14: Current limit of controller
• P15: લો વોલ્યુમtage protection setting of controller
• P16: ODO distance reset
• P17: Cruise mode selection
• P18: ઝડપ ગુણોત્તર
• P19: સહાયક સ્તર
• P20: પ્રોટોકોલ પસંદગી

જાળવણી

Regular maintenance ensures the longevity and optimal performance of your e-bike kit.

• Keep all components clean and free from dust and debris.
• Regularly check all electrical connections for tightness and signs of wear.
• Ensure waterproof connectors are properly sealed to prevent moisture ingress.
• Inspect cables for any damage or fraying and replace if necessary.
• Store the e-bike in a dry environment when not in use.

મુશ્કેલીનિવારણ

If you encounter issues, refer to the error codes displayed on the LCD5 and the following general troubleshooting tips.

Error Codes (from LCD5 Display)

For any error code, first check all connections. If the issue persists, consult a qualified technician.

વોરંટી અને આધાર

વોરંટી માહિતી

આ ઉત્પાદન એ સાથે આવે છે 1 વર્ષની ઉત્પાદક વોરંટી. વોરંટી દાવાઓ માટે કૃપા કરીને ખરીદીનો પુરાવો રાખો. સામાન્ય ઉપયોગની સ્થિતિમાં વોરંટી ઉત્પાદન ખામીઓને આવરી લે છે.

ગ્રાહક આધાર

For technical assistance, troubleshooting, or warranty inquiries, please contact mGYDY customer support through your retailer or the official mGYDY webસાઇટ