iGAGING Fastener Cal Digital Caliper 0-6"/150 mm Instruction Manual

પરિચય

This manual provides detailed instructions for the safe and effective use of your iGAGING Fastener Cal Digital Caliper, Model 100-344-06. This precision measuring tool is designed for accurate measurements in various units, including standard fastener sizes. Please read this manual thoroughly before operation and retain it for future reference.

ઉત્પાદન ઓવરview અને લક્ષણો

The iGAGING Fastener Cal Digital Caliper is a versatile tool engineered for precision. Key features include:

• Precise Nut & Bolt Measuring Tool: Measures in inch, metric, and fractions, with an additional mode for fastener sizes (4th, 16th, 32nd, and 128th increments) to simplify identification.
• IP54 Protective Design: Engineered to resist dust and humidity, ensuring reliable performance in various environments.
• Convenient Display & Longevity: Features a large, easy-to-read LCD screen. Powered by an included 3V CR2032 battery, offering over 2 years of typical use.
• Robust Stainless Steel Build: Constructed with a durable stainless steel frame, a smooth sliding mechanism, and a non-slip grip for consistent, long-term use.

Image: The iGAGING Fastener Cal Digital Caliper, Model 100-344-06, displaying a measurement on its LCD screen.

સેટઅપ

1. બેટરી ઇન્સ્ટોલેશન

The caliper requires one 3V CR2032 battery (included). To install or replace the battery:

1. Locate the battery compartment cover on the back of the display unit.
2. Use a small screwdriver to remove the two miniature screws securing the cover.
3. Carefully remove the old battery, if present.
4. Insert the new CR2032 battery with the positive (+) side facing up.
5. કવરને બદલો અને તેને સ્ક્રૂથી સુરક્ષિત કરો.

2. Initial Power-On and Zeroing

After battery installation:

1. દબાવો ચાલુ/બંધ button (green button) to power on the caliper.
2. Gently close the measuring jaws completely.
3. દબાવો શૂન્ય button (labeled '0') to set the display to 0.00. This establishes the absolute origin.

Image: The iGAGING Fastener Cal Digital Caliper stored in its fitted protective case, alongside the instruction manual and a spare battery.

ઓપરેટિંગ સૂચનાઓ

મૂળભૂત માપન

માપ લેવા માટે:

1. Ensure the caliper is powered on and zeroed.
2. Open the jaws and position the object to be measured between them.
3. Gently close the jaws until they make firm contact with the object.
4. LCD ડિસ્પ્લે પરથી સીધા માપ વાંચો.

માપન મોડ્સ

The caliper supports multiple measurement modes. Press the મોડ button to cycle through them:

• Inch (in): Displays measurements in decimal inches.
• Metric (mm): Displays measurements in millimeters.
• Fractional (in 1/X): Displays measurements in fractional inches (e.g., 1/16, 1/32, 1/128).
• Fastener Size (NUT): Displays the closest standard fastener size (e.g., 1/4, 5/16, 3/8 inch). This mode is activated by pressing the NUT બટન

છબી: ક્લોઝ-અપ view of the caliper's digital display, illustrating the various measurement modes: decimal inch, fractional inch, millimeter, and fastener size.

Absolute Origin Feature

The caliper features an absolute origin function. Once zeroed, the caliper remembers its zero point even when powered off. When powered back on, it will display the correct measurement relative to the last set zero, eliminating the need to re-zero for each use unless desired.

જાળવણી

સફાઈ

To maintain accuracy and prolong the life of your caliper:

• Wipe the measuring surfaces and body with a clean, dry, lint-free cloth after each use.
• Avoid using solvents or harsh chemicals, as these can damage the display or finish.
• Ensure no dust or debris accumulates on the measuring scale or inside the sliding mechanism.

સંગ્રહ

When not in use, store the caliper in its provided protective case in a dry, temperature-controlled environment. Avoid exposing it to extreme temperatures, humidity, or direct sunlight.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

વોરંટી અને આધાર

For warranty information, technical support, or service inquiries, please contact iGaging customer service. Refer to the contact information provided with your product packaging or visit the official iGaging webસહાય માટે સાઇટ.