Bietrun 2000W Pure Sine Wave Inverter User Manual

1. પરિચય

This manual provides essential information for the safe and efficient operation of your Bietrun 2000W Pure Sine Wave Inverter. Please read it thoroughly before installation and use, and retain it for future reference.

પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• 1 x Bietrun 2000W Pure Sine Wave Inverter
• 2 x 10AWG 3-foot Battery Cables (Red and Black)
• 1 x Ground Cable
• 1 x રીમોટ કંટ્રોલ
• 4 x ફ્યુઝ
• 1 x Small Wrench
• માઉન્ટિંગ સ્ક્રૂ

Image 1.1: The Bietrun 2000W Pure Sine Wave Inverter with its remote control, battery cables, ground cable, fuses, and wrench.

2. સલામતી સૂચનાઓ

Observe the following safety precautions to prevent injury and damage to the inverter or connected devices:

• ઇન્વર્ટર ખોલશો નહીં casing. અંદર કોઈ વપરાશકર્તા-સેવાયોગ્ય ભાગો નથી.
• Ensure proper ventilation around the inverter. Do not block cooling vents.
• Keep the inverter away from water, moisture, flammable materials, and direct sunlight.
• Connect the inverter only to a 12V DC power source. Connecting to other voltages નુકસાન પહોંચાડી શકે છે.
• Ensure correct polarity when connecting battery cables (Red to Positive, Black to Negative). Reverse polarity will cause damage.
• Always connect the ground cable to a proper earth ground.
• Do not exceed the inverter's rated continuous power output (2000W) or peak surge power (4000W).
• Disconnect the inverter from the battery before performing any maintenance or cleaning.

સંકલિત સુરક્ષા સુવિધાઓ

The inverter includes multiple protection mechanisms:

• ઓવરલોડ પ્રોટેક્શન
• લો વોલ્યુમtage રક્ષણ
• GFCI પ્રોટેક્શન
• ઓવરવોલtage રક્ષણ
• અતિશય તાપમાન રક્ષણ
• શોર્ટ સર્કિટ પ્રોટેક્શન
• રિવર્સ કનેક્શન પ્રોટેક્શન
• વર્તમાન સંરક્ષણ પર

Image 2.1: Visual representation of the inverter's comprehensive safety protection system.

3. ઉત્પાદન સુવિધાઓ

The Bietrun 2000W Pure Sine Wave Inverter is designed for reliable power conversion with advanced features:

• શુદ્ધ સાઇન વેવ આઉટપુટ: Provides high-quality AC power (THD < 3%) suitable for sensitive electronics, ensuring stable operation and minimizing damage risk.
• ઉચ્ચ કાર્યક્ષમતા: Conversion efficiency exceeding 90% reduces energy loss.
• સતત શક્તિ: Delivers 2000W continuous power with a 4000W peak surge capacity.
• બહુમુખી આઉટપુટ: Features 4 AC outlets, 1 AC wiring terminal, 2 USB ports (5V/2.1A), and 1 Type-C port (5V/2.1A).
• HD LED Display: Provides real-time status updates including input/output voltage, charging status, battery status, current power, and fault codes.
• રીમોટ કંટ્રોલ: Allows for convenient power management from a distance.
• શાંત કામગીરી: High-efficiency cooling system with a low-noise fan maintains optimal operating temperature.
• કોમ્પેક્ટ અને ટકાઉ ડિઝાઇન: Encased in rugged Aluminum Alloy, with dimensions of 19 x 10 x 7 inches and a weight of 12.5 lbs.

Image 3.1: Key features of the Bietrun 2000W Pure Sine Wave Inverter.

Image 3.2: Illustrates the stable, grid-like output of a pure sine wave inverter compared to unstable power from other types.

4. સેટઅપ અને ઇન્સ્ટોલેશન

સ્થાન અને માઉન્ટિંગ

Choose a dry, well-ventilated location away from direct sunlight, heat sources, and flammable materials. The inverter can be wall-mounted using the provided screws.

બેટરી સુસંગતતા

The inverter is compatible with various 12V battery types, including LiFePO4, LI, SLD, GEL, FLD, and AGM batteries.

Image 4.1: The inverter supports multiple 12V battery chemistries.

જોડાણ પગલાં

1. કેબલ્સ તૈયાર કરો: Use the provided 10AWG 3-foot cables. Ensure all connections are secure.
2. Connect Ground Cable: Attach the green/yellow ground cable to the inverter's ground terminal and to a reliable earth ground point.
3. બેટરી કેબલ કનેક્ટ કરો:
   • કનેક્ટ કરો લાલ battery cable to the inverter's સકારાત્મક (+) ટર્મિનલ
   • કનેક્ટ કરો કાળો battery cable to the inverter's નકારાત્મક (-) ટર્મિનલ
   • ના બીજા છેડાને જોડો લાલ cable to the battery's સકારાત્મક (+) ટર્મિનલ
   • ના બીજા છેડાને જોડો કાળો cable to the battery's નકારાત્મક (-) ટર્મિનલ

   મહત્વપૂર્ણ: Ensure correct polarity. A spark may occur during the final connection, which is normal due to capacitor charging.
4. સુરક્ષિત જોડાણો: Double-check all connections for tightness to prevent loose contacts and overheating.

Image 4.2: Basic wiring diagram for connecting the inverter to a 12V battery.

Inverter Interface Overview

Image 4.3: Front panel layout with output interfaces and controls.

Image 4.4: Rear panel layout with battery input terminals and cooling fans.

5. ઓપરેશન

પાવરિંગ ચાલુ/બંધ

• મેન્યુઅલ ઓપરેશન: Flip the ON/OFF switch on the inverter to the 'ON' position to power on. Flip to 'OFF' to power off.
• રીમોટ કંટ્રોલ ઓપરેશન: Ensure the inverter's 'REMOTE' switch is in the 'ON' position. Use the ON/OFF buttons on the remote control to operate the inverter.

Image 5.1: The remote control allows for convenient operation.

કનેક્ટિંગ ઉપકરણો

Once the inverter is powered on, plug your AC devices into the AC outlets or connect to the AC wiring terminal. USB devices can be connected to the USB or Type-C ports.

Ensure the total power consumption of all connected devices does not exceed 2000W continuously.

6. HD Display Information

The integrated HD display provides real-time operational data and fault indications:

• ઇનપુટ: બેટરી વોલ્યુમ દર્શાવે છેtage (BT) and internal temperature (T).
• આઉટપુટ: Shows output frequency (Hz), AC voltage (AC), and current power consumption (P).
• બેટરી સ્થિતિ: Visual indicator of battery charge level.
• વેવફોર્મ: Indicates pure sine wave output.
• ફોલ્ટ કોડ્સ: Numeric codes appear for specific issues, aiding in troubleshooting.

Image 6.1: The HD display provides comprehensive status updates and fault codes.

ફોલ્ટ કોડ વર્ણન

• 2: લો વોલ્યુમtage ચેતવણી
• 3: ઓવરવોલtage રક્ષણ
• 4: લો વોલ્યુમtage રક્ષણ
• 5: ઓવરલોડ ચેતવણી
• 6: ઓવરલોડ પ્રોટેક્શન
• 7: અતિશય તાપમાન રક્ષણ
• 8: આઉટપુટ શોર્ટ સર્કિટ પ્રોટેક્શન

7. મુશ્કેલીનિવારણ

If the inverter is not functioning correctly, refer to the display for fault codes and consult the table below:

If the fault persists after attempting the solutions, contact customer support.

8. સ્પષ્ટીકરણો

9. જાળવણી

Regular maintenance ensures optimal performance and longevity of your inverter:

• સફાઈ: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure cooling vents are free from dust and debris. Do not use liquid cleaners.
• કનેક્શન તપાસ: Regularly inspect battery cable connections for tightness and corrosion. Clean any corrosion with a wire brush and baking soda solution.
• વેન્ટિલેશન: Ensure the inverter always has adequate airflow. Do not operate in enclosed spaces without ventilation.
• ફ્યુઝ રિપ્લેસમેન્ટ: If a fuse blows, replace it only with a fuse of the same type and rating as specified in the package contents.

10. વોરંટી અને સપોર્ટ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Bietrun webસાઇટ. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.