1. પરિચય
This manual provides comprehensive instructions for the installation, operation, and programming of your DieseRC Wireless Roller Shutter Remote Control Switch. This device is designed to wirelessly control AC motors, enabling forward, reverse, and stop functions for applications such as garage doors, electric gates, and roller shutters. Please read this manual carefully before use to ensure proper functionality and safety.
2. પેકેજ સામગ્રી
- 1 x Relay Receiver Board
- 2 x Transmitters (battery included)
- 1 x ઉત્પાદન મેન્યુઅલ
3. સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| રીસીવર વર્કિંગ વોલ્યુમtage | AC 90V~250V |
| શાંત વર્તમાન | <10 mA |
| મહત્તમ વર્તમાન | 3A (Inductive Load), 10A (Resistive Load) |
| આરએફ આવર્તન | 433MHz |
| ઓપરેટિંગ તાપમાન | -30°C થી +80°C |
| પ્રાપ્તિ સંવેદનશીલતા | >97 dBm |
| Number of Storable Remotes | 20 સુધી |
| કોડિંગ સપોર્ટ | 1527 Learning-Code |
| RF Operating Mode | ASK Superheterodyne Wireless Reception |
| સ્વાગત શ્રેણી | Approx. 20 ~ 50 meters (open area) |
| ઓપરેટિંગ મોડ્સ | Momentary / Toggle / Latched Mode |
| ટ્રાન્સમીટર બેટરી | 2 x CR2016 (સમાયેલ છે) |
| સુસંગત ઉપકરણો | Garage door, electric curtain, electric gate, roller door |
4. સેટઅપ
4.1 સલામતી સાવચેતીઓ
- Ensure power is disconnected before any wiring.
- Wiring should be performed by a qualified electrician if you are unsure.
- Verify correct polarity (Live, Neutral) to avoid damage or short circuits.
4.2 Wiring the Receiver
Connect the receiver to your AC motor and power supply according to the diagram below. The receiver supports AC 90V-250V input. Ensure secure connections for all wires.
Image: Receiver dimensions and wiring diagram. Note the 'Up' and 'Down' motor connections and AC 90-250V power input.
The receiver features large screw ports for easy installation and metal clips for secure wiring. A transparent flip cover allows for circuit adjustment.
છબી: વિગતવાર view of the receiver's screw terminals and cable compatibility.
૫.૧ પ્રારંભિક પાવર-અપ
After wiring, apply power to the receiver. The indicator light on the receiver will illuminate, indicating it is ready for operation or programming.
4.4 ઉત્પાદન ઓવરview વિડિયો
Video: This video provides a visual overview of the DieseRC 2201COM receiver and KT03 remote control, highlighting their design and features.
5. ઓપરેટિંગ મોડ્સ
The DieseRC remote control switch supports three main operating modes: Momentary, Toggle, and Latched. All products are set to Toggle mode before shipment. If you wish to change the operating mode, you must first reset the receiver (see Section 6.2).
Image: Visual representation of Momentary, Toggle, Latched, and Delay operating modes.
5.1 Momentary Mode
- Press and hold the "▲" button: The motor rotates forward.
- Release the button: The motor stops.
5.2 ટૉગલ મોડ
- " દબાવો▲" button once: The motor rotates forward.
- " દબાવો▲" button again: The motor stops.
5.3 Latched Mode
- " દબાવો▲" button: The motor rotates forward.
- " દબાવો▼" button: The motor rotates backward.
- " દબાવો■" button: The motor stops.
5.4 અરજી સampલેસ
છબી: દા.તample of the remote control switch used for a garage door.
Video: This video demonstrates various applications of the DieseRC Wireless Roller Shutter Remote Control Switch, showcasing its functionality in controlling different types of AC motors.
6. પ્રોગ્રામિંગ રિમોટ કંટ્રોલ્સ
The receiver can store up to 20 transmitters. Follow these steps to program your remote control to the desired operating mode.
Image: Step-by-step programming instructions for different modes.
6.1 Learning a Remote Control
- Press the learning button on the receiver:
- દબાવો 1 વખત for Momentary Mode.
- દબાવો 2 વખત for Toggle Mode.
- દબાવો 3 વખત for Latched Mode.
- " દબાવો▲" button on your remote control. Wait 3 seconds.
- " દબાવો▼" button on your remote control. The programming is successful.
Note: For Latched Mode, the remote control requires 3 keys (Forward, Reverse, Stop).
6.2 Resetting the Receiver
To clear all programmed remote controls from the receiver's memory:
- Press the learning button on the receiver 8 વખત.
Important: After resetting, all previously programmed remote controls will no longer work and must be re-programmed.
6.3 Programming Demonstration Video
Video: A step-by-step video guide on how to program the DieseRC 2201COM receiver, covering the different operating modes and remote control pairing.
7. જાળવણી
૬.૨ ટ્રાન્સમીટર બેટરી રિપ્લેસમેન્ટ
The remote control transmitters use 2 x CR2016 batteries. If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the transmitter image for visual guidance.
Image: DieseRC remote control transmitter.
7.2 સફાઈ
Wipe the receiver and transmitters with a dry, soft cloth. Do not use abrasive cleaners or solvents.
7.3 પર્યાવરણીય પરિસ્થિતિઓ
Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight. Ensure the receiver is installed in a location with adequate ventilation.
8. મુશ્કેલીનિવારણ
- રિમોટ કંટ્રોલ જવાબ આપતું નથી:
- Check the battery in the transmitter. Replace if necessary.
- Ensure the receiver has power.
- If the receiver was recently reset, re-program the remote control (see Section 6.1).
- Ensure the remote is within the effective operating range (20-50 meters).
- મોટર ચાલતી નથી:
- Verify all wiring connections are secure and correct (refer to Section 4.2).
- Check the power supply to the receiver and motor.
- Ensure the motor itself is functioning correctly.
- હસ્તક્ષેપ:
- While multiple remote control sets can be used in the same area without interference (except in Momentary mode), strong local RF interference might affect performance. Try relocating the receiver if possible.
9. વોરંટી અને સપોર્ટ
DieseRC products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please reach out to DieseRC customer support through the vendor's contact information provided at the point of purchase.