1. પરિચય
Thank you for choosing the FLITI AMS193 Motion Sensor Solar Security Lights. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring adjustable heads, a sensitive motion sensor, and a durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. સલામતી માહિતી
- Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure proper charging.
- Do not disassemble or modify the product. Unauthorized modifications may cause damage and void the warranty.
- ઉત્પાદનને આગ અથવા ઊંચા તાપમાનથી દૂર રાખો.
- Avoid direct eye exposure to the bright LED light.
- સ્થાનિક નિયમો અનુસાર બેટરી અને ઇલેક્ટ્રોનિક ઘટકોનો નિકાલ કરો.
- This product is IP65 waterproof, suitable for outdoor use in various weather conditions, but avoid submerging it in water.
3. પેકેજ સામગ્રી
બધી વસ્તુઓ હાજર છે તેની ખાતરી કરવા માટે કૃપા કરીને પેકેજ તપાસો:
- FLITI AMS193 Solar Security Light Unit (x2)
- માઉન્ટ કરવાનું કૌંસ (x2)
- Screws and Wall Plugs (x4 sets)
- વપરાશકર્તા માર્ગદર્શિકા (x1)
4. ઉત્પાદન સુવિધાઓ
- સુપર બ્રાઇટ રોશની: Equipped with 229 high-quality LED beads, providing up to 2500 lumens of 6500K bright white light.
- Wider Lighting Area: Features 3 independently adjustable lamp heads and a rotatable solar panel, allowing for omnidirectional and multi-angle lighting coverage up to 120 degrees.
- Ultra-Sensitive Motion Sensor: An upgraded infrared digital motion sensor detects movement up to 12 meters (39 feet) within a 120-degree angle, activating the light quickly at night.
- IP65 વોટરપ્રૂફ: Durable construction ensures reliable operation in various outdoor weather conditions, including rain and snow.
- Solar Powered & Wireless: Environmentally friendly and easy to install without the need for electrical wiring.
Image: Key features of the FLITI AMS193 solar light, including sensing distance, operating modes, and waterproof rating.
Image: High-quality LED beads and brightness comparison.
Image: IP65 Waterproof feature in action during rain.
5. સેટઅપ અને ઇન્સ્ટોલેશન
The FLITI AMS193 solar security light is designed for quick and simple wireless installation.
૨.૧ ઇન્સ્ટોલેશન સ્થાન પસંદ કરવું
- Select a location that receives direct sunlight for at least 6-8 hours per day to ensure the solar panel can fully charge the battery.
- Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion sensor detection.
- Mount the light at a height of approximately 2-3 meters (6.5-10 feet) for optimal motion detection and light coverage.
5.2 માઉન્ટ કરવાનું પગલું
- Mark the desired installation position on the wall.
- ચિહ્નિત સ્થાનો પર બે છિદ્રો ડ્રિલ કરો.
- ડ્રિલ્ડ છિદ્રોમાં દિવાલ પ્લગ દાખલ કરો.
- આપેલા સ્ક્રૂનો ઉપયોગ કરીને માઉન્ટિંગ બ્રેકેટને દિવાલ સાથે જોડો.
- Slide the solar light unit onto the mounting bracket until it clicks securely into place.
Image: Installation steps for mounting the solar light.
5.3 Adjusting Light Heads and Solar Panel
The solar panel and the three lamp heads can be rotated independently to customize lighting direction and solar charging angle.
- Adjust the solar panel to face direct sunlight for maximum charging efficiency.
- Angle the three lamp heads to cover your desired lighting areas, such as pathways, doorways, or garden sections.
Image: Flexible rotation design of the solar panel and light heads.
6. ઓપરેટિંગ સૂચનાઓ
The FLITI AMS193 features three distinct operating modes, selectable via a button on the back of the unit.
6.1 પ્રારંભિક ચાર્જિંગ
Before first use, allow the solar light to charge in direct sunlight for at least 8-10 hours to ensure the battery is fully charged.
Image: Solar light charging during the day and activating at night.
6.2 મોડ પસંદગી
Press the power button on the back of the unit to cycle through the following modes:
- Mode 1 (Motion Sensor Mode): The light remains off until motion is detected. When motion is sensed, the light turns on at full 2500LM brightness for approximately 20 seconds, then turns off after motion ceases.
- Mode 2 (Dim to Sensor Mode): The light automatically turns on at dusk at a low brightness (approx. 200LM). When motion is detected, it switches to full 2500LM brightness for approximately 20 seconds, then returns to dim brightness after motion ceases. After 6 hours of operation, it automatically switches to Mode 1.
- Mode 3 (Always On Mode): The light automatically turns on at dusk at a medium brightness (approx. 500LM) and stays on continuously. After 4 hours of operation, it automatically switches to Mode 1.
Image: Visual representation of the three operating modes.
7. જાળવણી
Regular maintenance ensures the longevity and optimal performance of your solar lights.
- ક્લીન સોલર પેનલ: સમયાંતરે સોલાર પેનલને સોફ્ટ, ડી વડે સાફ કરોamp ધૂળ, ગંદકી અથવા કાટમાળ દૂર કરવા માટે કાપડ. સ્વચ્છ પેનલ મહત્તમ સૂર્યપ્રકાશ શોષણ અને ચાર્જિંગ કાર્યક્ષમતા સુનિશ્ચિત કરે છે.
- બેટરી રિપ્લેસમેન્ટ: The unit uses rechargeable batteries. If the light's performance significantly decreases over time, the batteries may need replacement. Access the battery compartment by removing the plate cover. Ensure to replace with compatible rechargeable batteries.
- નુકસાન માટે તપાસ કરો: Regularly check the light for any physical damage, loose connections, or signs of wear.
8. મુશ્કેલીનિવારણ
If you encounter issues with your FLITI AMS193 solar lights, refer to the following common problems and solutions:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| રાત્રે લાઈટ ચાલુ થતી નથી. | ચાર્જિંગ માટે પૂરતો સૂર્યપ્રકાશ નથી. Switch is off or in incorrect mode. Battery depleted or faulty. | Ensure the solar panel receives 6-8 hours of direct sunlight daily. Check the operating mode and ensure it's set correctly (Mode 1, 2, or 3). Allow several days of charging. If issue persists, consider replacing the rechargeable battery. |
| Light is dim or only stays on for a short time. | અપૂરતું ચાર્જિંગ. ગંદા સોલાર પેનલ. જૂની થતી બેટરી. | Relocate the light to an area with more direct sunlight. સોલાર પેનલને નિયમિતપણે સાફ કરો. Replace the rechargeable battery if it's old. |
| Motion sensor is not working or too sensitive. | સેન્સર અવરોધિત. Incorrect mounting height/angle. Environmental factors (e.g., strong winds, heat sources). | ખાતરી કરો કે સેન્સર લેન્સ સ્વચ્છ અને અવરોધ રહિત છે. Adjust the mounting height and angle for optimal detection. Consider relocating if false triggers are frequent due to environmental factors. |
If these solutions do not resolve the issue, please contact customer support.
9. સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| મોડલ નંબર | AMS193 |
| બ્રાન્ડ | FLITI |
| પ્રકાશ સ્ત્રોત | 229 એલઇડી માળા |
| તેજ | 2500 સુધી લુમેન્સ |
| રંગ તાપમાન | ૪૧૦૦ કેલ્વિન (કૂલ વ્હાઇટ) |
| મોશન સેન્સર રેન્જ | 12 મીટર (39 ફૂટ) સુધી |
| મોશન સેન્સર એંગલ | 120 ડિગ્રી |
| પાણી પ્રતિકાર | IP65 વોટરપ્રૂફ |
| પાવર સ્ત્રોત | સૌર સંચાલિત |
| સામગ્રી | પ્લાસ્ટિક |
| માઉન્ટિંગ પ્રકાર | વોલ માઉન્ટ |
| લાઇટ હેડની સંખ્યા | 3 (એડજસ્ટેબલ) |
10. વોરંટી અને સપોર્ટ
ઉત્પાદક વોરંટી: This product comes with a 2-year manufacturer warranty from the date of purchase, covering defects in materials and workmanship under normal use.
શું આવરી લેવામાં આવે છે: સામગ્રી અને કારીગરી માં ખામી.
શું આવરી લેવામાં આવતું નથી: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or normal wear and tear.
ગ્રાહક આધાર: For warranty claims, technical assistance, or any questions regarding your FLITI AMS193 solar lights, please contact your retailer or the manufacturer's customer service through the contact information provided at the point of purchase.