mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller Sine Wave for 750W Motor Instruction Manual

ઉત્પાદન ઓવરview

This manual provides detailed instructions for the mGYDY 36V/48V 25A Ebike Brushless Motor Controller, designed for 750W motors. It ensures stable speed control and responsive braking for brushless motors, enhancing your electric bike's performance. The controller features an aluminum alloy shell for efficient heat dissipation and precisely designed interfaces for reliable long-term use. A 1T5 cable is included for a complete setup.

Image of the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller, a silver rectangular unit with multiple black cables extending from one end, against a plain background.

મુખ્ય લક્ષણો

• Powerful Compatibility and Performance: Designed for 36V/48V systems and 750W motors, compatible with KT Accessories. Provides steady speed control and sensitive braking.
• કાર્યક્ષમ ગરમીનું વિસર્જન: Aluminum alloy shell protects internal circuits from thermal overload, extending product lifespan.
• High Precision Wiring and Interfaces: Minimizes malfunction risks and ensures consistent operation.
• સંપૂર્ણ પેકેજ: Includes the brushless controller and a 1T5 cable for convenient installation.
• કોમ્પેક્ટ ડિઝાઇન: Measures 126x66x39mm with a sleek silver finish, integrating well into e-bike setups.

Close-up image of the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller's label, detailing its model number (KT36/48ZSRM-EEP10L), rated voltage (DC36V/48V), rated current (12A), maximum current (25±1A), speed set (1-4.2V), brake input (Low-Level), and low voltage protection (DC30/40±0.5V).

Image showing the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller with its dimensions (126mm length, 66mm width, 39mm height) and various labeled connectors: Light (2Pins), Assist PAS (3Pins), 1T5 (9Pins), Motor (9Pins), and Battery (for XT60).

સેટઅપ સૂચનાઓ

ઘટક ઓળખ

Before installation, identify all components included in your package:

• mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller
• 1T5 Cable
• Other accessories (e.g., display, throttle, brakes - if purchased separately or as part of a kit)

કનેક્શન માર્ગદર્શિકા

The controller features multiple labeled ports for connecting various e-bike components. Ensure all connections are secure and correctly aligned to prevent damage.

1. બેટરી કનેક્શન: Connect your e-bike battery to the XT60 connector on the controller. Ensure correct polarity.
2. મોટર કનેક્શન: Connect the motor cable to the 9-pin motor port on the controller.
3. 1T5 Cable Connection: Connect the main 1T5 cable to its designated 9-pin port on the controller. This cable typically branches out to connect other peripherals.
4. ડિસ્પ્લે કનેક્શન: Connect your KT display to the 5-pin display connector on the 1T5 cable. Important: This controller requires a KT display for proper operation.
5. લાઇટ કનેક્શન: If applicable, connect your e-bike light to the 2-pin light connector on the 1T5 cable.
6. PAS (Pedal Assist Sensor) Connection: Connect the PAS sensor to the 3-pin Assist PAS connector on the 1T5 cable.
7. Brake Lever Connections: Connect your e-bike brake levers to the two 2-pin brake connectors on the 1T5 cable.
8. થ્રોટલ કનેક્શન: If using a thumb throttle, connect it to the 3-pin Thumb Throttle connector on the 1T5 cable.

કંટ્રોલર માઉન્ટ કરવાનું

Securely mount the controller to your e-bike frame using appropriate fasteners. The aluminum alloy shell is designed for heat dissipation, so ensure it has adequate airflow.

Image illustrating the various connectors of the 1T5 cable, including 9Pin Controller, 2Pin Light, 3Pin Thumb Throttle, 5Pin Display, and two 2Pin Brake connectors, color-coded for easy identification.

Image of the mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller with all its ports clearly labeled, emphasizing the requirement for a KT Display and showing connections for Light, PAS, 1T5, Motor, and Battery (XT60).

Video demonstrating the simple connection steps for the e-bike brushless motor controller, showing how to connect the various cables including the light, PAS, 1T5, motor, and battery, and then connecting a display.

ઓપરેટિંગ સૂચનાઓ

Once all components are correctly connected and the battery is charged:

1. પાવર ચાલુ: Turn on your e-bike's power switch, usually located on the battery or display.
2. પ્રદર્શન સક્રિયકરણ: Activate the KT display. The display will show essential information such as speed, battery level, and assist mode.
3. Assist Level Selection: Use the controls on your KT display to select your desired pedal assist level.
4. સવારી: Begin pedaling. The motor will provide assistance based on your selected level. If a throttle is installed, it can be used to control speed directly.
5. બ્રેકિંગ: The controller is designed for sensitive braking response. Engaging the brake levers will cut power to the motor.
6. પાવર બંધ: When finished riding, power off the display and then the battery.

જાળવણી

Regular maintenance ensures the longevity and optimal performance of your mGYDY Ebike Brushless Motor Controller.

• સફાઈ રાખો: Periodically wipe down the controller's exterior with a dry cloth to remove dirt and dust. Avoid using harsh chemicals or excessive moisture.
• કનેક્શન્સ તપાસો: Regularly check all cable connections for tightness and signs of wear or corrosion. Loose connections can lead to intermittent power or component failure.
• ઓવરહિટીંગ ટાળો: While the aluminum alloy shell provides good heat dissipation, avoid operating the e-bike in conditions that could lead to extreme overheating. Ensure the controller is not covered or obstructed.
• પાણીથી બચાવો: Although the controller is waterproof, avoid submerging it in water or exposing it to high-pressure water jets.
• સૉફ્ટવેર અપડેટ્સ: If applicable, refer to your KT display manual or manufacturer's website for any available firmware updates for the controller system.

મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your e-bike controller.

No Power to Motor/Display

• બેટરી તપાસો: Ensure the e-bike battery is fully charged and properly connected to the controller.
• કનેક્શન્સ તપાસો: Verify that all power cables (battery, motor, display) are securely connected and free from damage.
• ડિસ્પ્લે સુસંગતતા: Confirm that you are using a compatible KT display, as this controller requires one.

Motor Not Responding

• Check Motor Cable: Ensure the motor cable is firmly connected to the controller.
• PAS/Throttle Connection: Verify that the PAS sensor or throttle is correctly connected and functioning.
• બ્રેક લિવર્સ: Ensure brake levers are not engaged, as they cut motor power. Check brake lever sensor connections.

Intermittent Power/Performance

• છૂટક જોડાણો: Inspect all connectors for looseness or corrosion.
• વાયરિંગ નુકસાન: Check for any visible damage to the wiring or insulation.
• ઓવરહિટીંગ: Allow the controller to cool down if it feels excessively hot. Ensure it has adequate ventilation.

ડિસ્પ્લે પર ભૂલ કોડ્સ

Refer to your KT display's instruction manual for specific error code interpretations and troubleshooting steps.

ટેકનિકલ વિશિષ્ટતાઓ

પેકેજ સામગ્રી

તમારા ઉત્પાદન પેકેજમાં નીચેની વસ્તુઓ શામેલ છે:

• 1 x mGYDY 36V/48V KT 25A Ebike Brushless Motor Controller
• 1 x 1T5 Cable

વોરંટી અને આધાર

This product comes with a 1-Year Manufacturer Warranty. For warranty claims or technical support, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.