SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller User Manual

1. પરિચય

This manual provides instructions for the installation, operation, and maintenance of the SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller. This device is designed for seamless integration into lighting systems, offering wireless control for both residential and commercial applications. It operates on 120-277VAC line voltage and supports various load types.

Figure 1: SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller with its packaging.

2. સલામતી માહિતી

• ચેતવણી: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
• Disconnect power at the circuit breaker or fuse before installing or servicing the device.
• આ ઉપકરણનો ઉપયોગ તેના નિર્દિષ્ટ રેટિંગ કરતાં વધુ લોડ સાથે કરશો નહીં.
• ખાતરી કરો કે બધા વાયર કનેક્શન સુરક્ષિત અને યોગ્ય રીતે ઇન્સ્યુલેટેડ છે.
• આ ઉપકરણ માત્ર ઇન્ડોર ઉપયોગ માટે બનાવાયેલ છે.
• The device meets regulatory guidelines for current leakage, ensuring safe operation.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• Wireless Wall Switch and Load Controller (SWX-851-WH)
• વાયર લીડ્સ
• માઉન્ટિંગ સ્ક્રૂ
• વાયર નટ્સ
• સૂચનાઓ (આ માર્ગદર્શિકા)

4. સેટઅપ અને ઇન્સ્ટોલેશન

4.1 વાયરિંગ સૂચનાઓ

The SWX-851-WH supports both 2-wire and 3-wire installations and does not require a neutral connection or a minimum load. It is compatible with 120-277VAC line voltage સિસ્ટમો.

• તમે પ્રારંભ કરો તે પહેલાં: સર્કિટ બ્રેકર પર પાવર બંધ કરો.
• Identify the LINE (hot) and LOAD wires in the wall box.
• Connect the wires from the SWX-851-WH to the corresponding wires in the wall box using the provided wire nuts:
  • કાળો વાયર: Connect to LINE (hot) wire.
  • બ્લુ વાયર: Connect to LOAD wire.
  • લીલા વાયર: Connect to GROUND wire.
  • White (or Yellow/Green) Wire: This is the NEUTRAL connection. If a neutral connection is available and desired, connect it. If no neutral is present or required, cap this wire off.
• ખાતરી કરો કે બધા જોડાણો સુરક્ષિત છે.

આકૃતિ 2: પાછળ view of the SWX-851-WH, illustrating wiring connections. Black for Line, Blue for Load, Green for Ground, and White/Yellow/Green for Neutral (optional).

4.2 ભૌતિક સ્થાપન

• Carefully push the wired controller into the wall box. The compact design allows for easier installation in crowded boxes.
• Secure the controller to the wall box using the provided mounting screws.
• Install the wall plate (not included) over the controller.
• સર્કિટ બ્રેકર પર પાવર પુનઃસ્થાપિત કરો.

4.3 વાયરલેસ પેરિંગ

The SWX-851-WH can be paired with up to 30 wireless sensors and remote wall stations for automatic lighting control. Refer to the specific instructions for your SENSORWORX wireless sensors or remote wall stations for pairing procedures. Typically, pairing involves a sequence of button presses on both devices.

For detailed instructions, you may scan the QR code on the back of the device or visit the SENSORWORX website. A direct link to the instructions is available અહીં.

5. ઓપરેશન

૪.૧ મૂળભૂત ચાલુ/બંધ નિયંત્રણ

The primary function of the SWX-851-WH is to control connected lighting loads. Press the button on the switch to toggle the connected lights ON or OFF.

આકૃતિ 3: ફ્રન્ટ view of the SWX-851-WH, showing the control button.

5.2 અદ્યતન રૂપરેખાંકન

The SWX-851-WH offers configurable settings for time delays, operational modes (occupancy, vacancy, switch disable), and photocell settings. These adjustments can be made without removing the cover plate, typically through specific button press sequences or via a paired sensor/programmer.

• ઓક્યુપન્સી મોડ: Lights turn ON automatically when occupancy is detected and OFF after a set time delay when the space is vacant.
• ખાલી જગ્યા: Lights must be turned ON manually but turn OFF automatically after a set time delay when the space is vacant.
• Switch Disable Mode: Disables the local switch button, allowing control only via paired wireless devices.
• ફોટોસેલ સેટિંગ્સ: Adjusts light level thresholds for automatic control based on ambient light.

Consult the full product documentation or the SENSORWORX website for detailed instructions on accessing and modifying these advanced settings.

6. જાળવણી

• સફાઈ: To clean the device, wipe with a soft, damp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં. સફાઈ કરતા પહેલા ખાતરી કરો કે પાવર બંધ છે.
• નિરીક્ષણ: Periodically inspect the device for any signs of damage or loose connections. If damage is found, disconnect power and contact a qualified electrician.
• અંદર કોઈ વપરાશકર્તા-સેવાયોગ્ય ભાગો નથી.

7. મુશ્કેલીનિવારણ

If the problem persists after attempting these solutions, contact SENSORWORX customer support or a qualified electrician.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

૧.૨ પ્રોડક્ટની વોરંટી

The SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller comes with a 5 વર્ષની વોરંટી from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, please retain your proof of purchase.

9.2 ગ્રાહક સપોર્ટ

For technical assistance, troubleshooting, or warranty inquiries, please contact SENSORWORX customer support. Visit the official SENSORWORX webસંપર્ક માહિતી અને વધારાના સંસાધનો માટે સાઇટ.

Webસાઇટ: www.sensorworx.com