RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. પરિચય

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. સેટઅપ

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

૩.૧ અનપેકિંગ અને પ્રારંભિક નિરીક્ષણ

• પેકેજિંગમાંથી તમામ ઘટકોને કાળજીપૂર્વક દૂર કરો.
• ખાતરી કરો કે પેકિંગ સૂચિમાં સૂચિબદ્ધ બધી વસ્તુઓ હાજર છે.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

૨.૩ કંટ્રોલરને કનેક્ટ કરવું

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• પાવર ઓવર ઇથરનેટ (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• બાહ્ય પાવર એડેપ્ટર: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• કેમેરા જોડાણો:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

છબી ૪.૧: ઉદાહરણample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 નેટવર્ક રૂપરેખાંકન

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web એમાં તેનું IP સરનામું દાખલ કરીને ઇન્ટરફેસ web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• ની અંદર web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. ઓપરેશન

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 ઓવરview નિયંત્રણો

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

છબી 3.2: વિગતવાર view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 કેમેરા પસંદગી

• Quick Select Buttons: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• સંખ્યાત્મક કીપેડ: For cameras beyond the quick select buttons (up to 255), press the CAM ID button, then enter the camera number using the numeric keypad, and press દાખલ કરો.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 PTZ નિયંત્રણ

• જોયસ્ટિક: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• પીટી સ્પીડ નોબ: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview મોડ

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: દબાવો ઓટો ફોકસ button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 પ્રીસેટ્સનો

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press દાખલ કરો સાચવી રાખવું. દબાવો ESC બહાર નીકળવા માટે.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press દાખલ કરો to recall. Press ESC બહાર નીકળવા માટે.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 મેનુ નેવિગેશન

• મેનુ બટન: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), દાખલ કરો confirms selections, and ESC acts as a back button.

4. જાળવણી

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 સફાઈ

• Use a soft, dry cloth to clean the exterior of the controller.
• હઠીલા ગંદકી માટે, સહેજ ડીampકાપડને પાણી અથવા હળવા, બિન-ઘર્ષક સફાઈ દ્રાવણથી ધોઈ લો.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 સંગ્રહ

• When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• ઉપકરણને ધૂળ અને ભેજથી સુરક્ષિત કરો.

5. મુશ્કેલીનિવારણ

આ વિભાગ તમને આવી શકે તેવી સામાન્ય સમસ્યાઓના ઉકેલો પૂરા પાડે છે.

૭.૧ પાવર નથી

• પાવર સ્ત્રોત તપાસો: Ensure the power adapter is securely connected to both the controller and a working power outlet.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• કેબલ અખંડિતતા: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• નેટવર્ક કનેક્ટિવિટી: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• પ્રોટોકોલ મિસમેચ: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• કૅમેરા ID: Ensure the correct camera ID is selected on the controller.
• લૉગિન ઓળખપત્રો: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web ઇન્ટરફેસ
• સીરીયલ કનેક્શન: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• ફર્મવેર: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webઅપડેટ્સ માટે સાઇટ.

5.3 LCD Display Issues

• કોઈ ડિસ્પ્લે નથી: ખાતરી કરો કે કંટ્રોલર ચાલુ છે.
• મંદ પ્રદર્શન: Check if there are any brightness settings on the controller that can be adjusted.

6. સ્પષ્ટીકરણો

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

૧૨. પ્રોડક્ટ વિડીયો પ્રદર્શન

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webસાઇટ

• ઉત્પાદક: ઝિયામેન આરજીબીલિંક સાયન્સ એન્ડ ટેકનોલોજી કંપની લિમિટેડ
• સત્તાવાર Webસાઇટ: www.rgblink.com (નોંધ: આ એક પ્લેસહોલ્ડર છે URL, please refer to your product packaging or official documentation for the correct support webસાઇટ)
• સંપર્ક માહિતી: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.