ESAB Rogue LHN ES245i Inverter Welder User Manual

1. પરિચય

This manual provides essential information for the safe and effective operation, setup, and maintenance of your ESAB Rogue LHN ES245i Inverter Welder. The Rogue ES 245i is a robust and high-performance inverter designed for demanding welding tasks, suitable for workshops, locksmiths, construction, maintenance, and minor repairs. It offers clean and stable welding for electrodes up to 4 mm (including cellulose) and TIG processes for thin sheets. Please read this manual thoroughly before using the equipment.

2. સલામતી માહિતી

વેલ્ડીંગ સાધનો ચલાવતી વખતે હંમેશા સલામતીને પ્રાથમિકતા આપો. સલામતીની સાવચેતીઓનું પાલન કરવામાં નિષ્ફળતા ગંભીર ઈજા અથવા મૃત્યુનું કારણ બની શકે છે.

• આંખ અને ચહેરાનું રક્ષણ: Always wear a welding helmet with appropriate shade filters to protect your eyes and face from arc rays and sparks.
• રક્ષણાત્મક કપડાં: Wear flame-resistant clothing, gloves, and sturdy footwear to protect against burns and electric shock.
• વેન્ટિલેશન: Ensure adequate ventilation to remove welding fumes and gases from the work area.
• ઇલેક્ટ્રિકલ સલામતી: Never operate the welder in wet conditions. Ensure all electrical connections are secure and properly grounded. Do not touch live electrical parts.
• આગ નિવારણ: Keep a fire extinguisher nearby. Remove flammable materials from the welding area.
• કાર્ય ક્ષેત્ર: Keep the work area clean and free of clutter. Ensure stable footing.
• સૂચનાઓ વાંચો: Always read and understand the entire instruction manual before operating the welder.

3. ઉત્પાદન સામગ્રી

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં શામેલ છે:

• 1 x ESAB Rogue ES 245i Inverter Welding Machine
• 1 x Electrode holder with 3-meter 100% copper cable
• 1 x Negative clamp with 3-meter 100% copper cable
• 1 x Ergonomic carrying handle
• ૧ x વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

4. સેટઅપ

4.1 અનપેકિંગ અને પ્લેસમેન્ટ

Carefully remove the welder and all accessories from the packaging. Place the machine on a stable, level surface, ensuring adequate clearance for ventilation around the unit.

આકૃતિ 1: બાજુ view of the ESAB Rogue ES245i Inverter Welder, showing the power input and output connections.

4.2 વિદ્યુત જોડાણો

• પાવર સપ્લાય: Connect the welder to a single-phase 220 V ± 10% power outlet. Ensure the circuit is protected by a 40 A recommended breaker.
• Electrode Holder: ઇલેક્ટ્રોડ હોલ્ડર કેબલને ફ્રન્ટ પેનલ પરના પોઝિટિવ (+) ટર્મિનલ સાથે જોડો.
• ગ્રાઉન્ડ Clamp: નકારાત્મક cl જોડોamp cable to the negative (-) terminal on the front panel. Attach the ground clamp securely to the workpiece, ensuring good electrical contact.

Figure 2: Front panel of the ESAB Rogue ES245i, displaying the control knob, digital display, and electrode/ground connections.

5. ઓપરેટિંગ સૂચનાઓ

૨.૧ પાવર ચાલુ અને મૂળભૂત નિયંત્રણો

• Turn on the main power switch located on the rear of the unit.
• The digital display on the front panel will illuminate.
• Use the control knob to select the desired welding process (SMAW or TIG) and adjust the current (Amperage). The digital control ensures maximum precision.
• The welder features automatic હોટસ્ટાર્ટ for easy arc ignition and આર્કફોર્સ for a stable arc, even with challenging electrodes.

5.2 SMAW (Shielded Metal Arc Welding) / Electrode Welding

• Select the SMAW mode using the control panel.
• Insert the appropriate electrode into the electrode holder. The Rogue ES 245i supports electrodes up to 4 mm, including cellulose types.
• Set the current according to the electrode manufacturer's recommendations and the material thickness.
• Strike the arc carefully and maintain a consistent arc length and travel speed for optimal weld quality.

5.3 TIG (Tungsten Inert Gas) Welding

The Rogue ES 245i is capable of TIG welding for thin sheets. For TIG welding, additional equipment such as a TIG torch with gas valve and a shielding gas cylinder will be required (not included).

• Connect the TIG torch to the appropriate terminal (usually negative for DC TIG).
• જમીન cl સાથે જોડોamp વર્કપીસ માટે.
• Connect the shielding gas hose to the TIG torch and open the gas cylinder valve.
• Select TIG mode on the welder and set the desired current.
• Initiate the arc using the scratch start method or a high-frequency start if your TIG torch supports it.

6. જાળવણી

નિયમિત જાળવણી તમારા વેલ્ડીંગ મશીનની આયુષ્ય અને શ્રેષ્ઠ કામગીરીની ખાતરી કરે છે.

• સફાઈ: Periodically clean the exterior of the machine with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use solvents.
• કેબલ નિરીક્ષણ: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
• કનેક્શન પોઈન્ટ્સ: Check that all electrical connections are tight and free from corrosion.
• સંગ્રહ: Store the welder in a clean, dry environment when not in use.

7. મુશ્કેલીનિવારણ

This section provides solutions to common issues you might encounter. For problems not listed here, contact qualified service personnel.

8. સ્પષ્ટીકરણો

Technical specifications for the ESAB Rogue LHN ES245i Inverter Welder: